Hi Nordic,
I am currently writing about the process of performing channel sounding sequentially on three connected devices. However, after the first channel sounding is...
I am using LVGL for simple Eink display UI, and trying to implement a simple if condition to check if the passed string argument is null as below:
If I only have btn1...
Nordic TS,
I've installed and begin to experiment with the DECT NR+ v1.1.1.0 FW. Initially, I'm noticing on obvious difference in the behavior of the dect_hello sample between...
I am trying to use the FIFO from the ADXL362 with in the Thingy:53. As I noticed there is now the Option to use ADXL362_STREAM. I just wanted to use the example from: https...
The specification for the nRF54L15 states that the typical current consumption for I_TIMER3 (TIMER10 running) is 240 mA/milliamps . The other timer values in the table are...
The Nordic Thingy:91X was initially unable to connect using certain SIMs (e.g., Airtel IoT) due to lack of NB-IoT support or no signal.
After switching to a Jio NB-IoT...
Hi to all,
I am trying to do a ZUTH (Zigbee unified test harness) test run, using the Silabs devices as golden devices (as per CSA recommendation) and nRF 52840 dongles...
Hello.
I'm trying to implement my own RF protocol, with the help of reference manual and examples provided here I was able to come up with this: http://pastebin.com/t2nhkj2B...
Now with the twi_hw_master.c with softdevice, I enable the twi on the start of twi_master_transfer and disable it at the end of twi_master_transfer, but I found the twi can...
Hi All,
I am in need to implement the Central BLE device which can receive the Data from an iOS peripheral device over a particular custom characteristic, Can anyone please...
I'm trying to implement my own radio protocol but the section about addressing in reference manual is very unclear to me. In the "Definition of logical addresses" table it...
Is it possible to protect part of the memory of nRF24le1, in such a way, that it can be used for a serial number?
For my application, it would be beneficial to be able...
Hello,
In the example "nRF51_SDK_8.1.0_b6ed55fvery\examples\ble_central\ble_app_multilink_central\pca10028" when opened in keil there is no flash_softdevice option shown...
dear everyone!
I order a kit- nRF52 preview DK:
www.nordicsemi.com/.../nRF52-Preview-DK
And i also download nRF52_SDK_0.9.1_3639cc9.zip:
developer.nordicsemi.com...
Hello,
I'm writing a driver for an I2C device (it's an external led driver).
My current code executes following steps ...
First I changed I2C configuration :
static...
Hello there.
I'm porting some code that previously worked on S110 stack v7 to stack v8 and I'am experiencing some issues.
After receiving a BLE_EVT_USER_MEM_REQUEST...
Accoding to the "how to generate the INIT file for the DFU",I have configuration Boot loader.hex,but i don't known how to configuration Soft Device.hex.The following is the...
Hello Nordic~
I want to control button debouncing on my nrf51822 based custom board. I went through the button_debounce example found in [Board/nrf6310/debounce_example...
Hi All,
I'm using ble_app_uart Application to send some notifications from Peripheral to central device. I'm using API ble_send_string() to send notifications to other...
