I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
I would like to use the nRF52840 as the subject device in a EE Capstone design course. Compiler tools (both Keil and Segger) work well and will be easy to teach but I am unable...
In the "sdk_config.h",there has two options, one is TIMER_ENABLED,the other is NRFX_TIMER_ENABLED, and in the sample ,there also have"nrf_drv_time" ,what's the difference...
I am trying to program an EBYTE 2G4M04S1B module. After connecting to the NRF-DK, in nRFgo Studio, I get the "No device detected, or readback protection may be set GUI", but...
Hi,
I try to implement the access to the SoftDevice functions in an application. I started with the TWI example and want to implement fstorage module from the SDK (SDK15...
The file components/libraries/serial/nrf_serial.c in nRF5 SDK is used for UART serial tx/rx and has support for timeouts. There appears to be a bug with use of timeouts. ...
hello,
I want to use the Nordic's smartCoap library(nRF5 Iot SDK v0.9.0) on my linux UDP,
I want to know if the Nordic's smartCoap library can really do this,
if can...
Hi,
nRF connect programmer can works with nRF52840,nRF52832 without problem.
I am trying programming nRF52810.
But, The read,erase all function always unavailable. ...
If I look in the schematic of the nRF52832 I see 3 VDD Legs (leg 13, leg 36, and leg 48), What is the leg number for the main power to the chip, that if I cut his power supply...
I am trying to rotate my oled screen 90 degree, but i couldn't.
I had surfing a lot for it, but still i have not perfect solution.
So please any one can suggest me or give...
Hey - I know there's no official support for C++ on this platform, but are there any other intrepid devs out there making this work?
I was able to build, flash and run my...
Hi All
I mount a NRF52810 minimum system for test BLE . It can works at no BLE mode , but don't work at BLE mode. The 32.768KHz clock works well . When I run a ble_app_blinky...
I use nrf52832 board, S132,SDK14.2 . I refer to some projects and nrf52 datasheet that indicate to use pin sensing mechanism( level trigger ) to wake up device from system...
We are using Nordic SDK version 15.2, and have successfully implemented many functions using the CLI API but are stuck on how to secure the CLI. We have a USB and RTT CLI...
Hi,
I am working with two nRF52840 DVKs and the 802.15.4 example "wireless uart" from the SDK v15.2.
I flash both boards, and both of them get initialized (LED1 ON). Then...
We program the nRF52840 with a Segger tool at 8MHz.
The programmation time for 400kB is 13s (0.5 erase, 2.3s soft device and 8s application).
When we reduce the frequency...
