I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
I'm looking for a way to use the nordic uart service ( devzone.nordicsemi.com/.../ble_sdk_app_nus_eval.html) from Linux using the native Linux BLE Stack (BlueZ). My application...
Hello,
I have compiled the Zigbee ZBOSS NCP HOST on an ARMv7 (32-bit) architecture according to the docs ( https://developer.nordicsemi.com/nRF_Connect_SDK/doc/zboss/3.11...
Hi all, I've searched through the devzone but unfortunately my issue is never mentioned.
The problem is: my nRF51 project is converted to a nRF52 project. Pins are all re...
We have a need to use 802.15.4 multiprotocol with BLE, we currently use the 52840 for several products. This uses older SDKs and the 802.15.4 Radio driver with our own MAC...
nRF5 SDK SD140 Using the nRF Connect Android app with the DFU utility, looking at the log I send the Enter Bootloader request and get a thumbs up back (op code = 1, status...
Hello, I want to display the "info button" on the Bluetooth menu in iOS. What configuration is needed on BLE to display it and some options like Disconnection, Forger this...
Programmer 2.0 is broken in nRF Connect for Desktop v3.8.0
Very often it does not detect connected devices, even if I disconnect and reconnect the nRF9160DK which is also...
Hi, we have gotten a bunch of fixes for periodic advertisement scanning and direction finding. Those fixes are required for us in order to release new SW, or development drop...
I`m using Ble Mesh Light and Light Switch examples (Gen OnOff models) in two nrf52840 Dongles. The default configuration of the button is that when I pressed the button in...
Hi,
I am trying to interface arducam mini 2mp ov2640 with nrf52840 and I am referring the following github repository: https://github.com/NordicPlayground/nrf52-ble-image...
Hi everyone,
I try to implement DFU on nrf52840 with SDK15.3 and softdevice s140.
I use the secure bootloader ble example and in BLE it works well. But I have an issue...
Hello,
I'm currently developing some firmware for the nrf52811. i currently ran into an memory issue and got stuck there.
i have started from the ble_app_templater from...
Hello
I got error in getting the mac address with available answer( devzone.nordicsemi.com/.../how-to-get-mac-address-using-nrf5340_dk) in forum. I tried to paste that code...
Hello,
I got saadc example on my nrf5340 dk running and now I would like to plot the incoming serial data.
saadc code example: saadc.zip
changed the way I got adviced...
