The link for downloading nRF6939 live cd v5.4 is broken.
https://www.nordicsemi.com/Software-and-Tools/Reference-Designs/nRFready-Smart-Remote-3-for-nRF52-Series/Downlo...
Using one ADC, the current can be reduced to about 40uA after the ADC value is taken. Using a two-channel ADC, after the ADC value is taken, the current stops at about 0.4...
I'm searching for a software engineer who can help us getting OTA support between nRF52810 and PIC16 MCU.
nRF52810 must have command- and data mode over UART, Pic controler...
I want to be able to read the gyro and accelerometer values from the MPU6050 sensor.
As a base start I downloaded the NRF5 SDK V15.3.0 and modified twi_sensor_pca10056 program...
Hi. I'm using nRF52832, SDK13.0.0.
I should use SHA256 and MD5.
I made my code as below.
NRF_CRYPTO_HASH_CREATE(init_packet_hash, SHA256); NRF_CRYPTO_HASH_CREATE(init_packet_md5...
Hi. I'm using nRF52832, SDK13.0.0.
I want to use SHA256 as below.
output32Byte = SHA256[input32Byte];
Which function or example can I refer to?
And also I want to...
I tried to port the example "ble_app_ipsp_initiator" to pc-ble-driver and run on Linux. The peer device is another PCA10056 device running ble_app_ipsp_acceptor. The problem...
Hi,
I am trying to run lte_ble_gateway sample on nrf9160 DK, but in debug I can not catch breakpoint on main().
When I going in debug mode step by step I find that the...
Hi
I am new to the NRF52840. I am trying to receive data from nrf24L01+ to the nrf52840 Development kit. I find some examples from the SDK radio receiver using PCAl0056...
Hello all：
I am using nRF52-DK（pca10040）to do some tests.
I want to use gazell and at the same time, I want to detect the events of the NRF_RADIO, connect it to PPI. ...
Hello,
I am using Eclipse to create a project using code from ble_app_hrs and I am developing for a nrf52832 chip. Unfortunately, I am getting a "was not declared in this...
I send a sequence of characteristic writes to my device, in code based on the nRF Toolbox. Sometimes I see this error message. Why does it happen and what steps can I take...
Hi Team
I created an own interface layer using the mesh SDK's "flash_manager" to have a simple API for accessing my application flash area.
Now, I am facing the problem...
Hi there,
I am migrating a project from SDK13 to SDK15.2, where I need to change the advertising data dynamically and change the ble_gap_adv_params_t properties type between...
I am using SDK12 with nrf52832. UART working fine (with FIFO) and Timer1 also works.
I wanted to set a 1 minute timeout around the UART dialog to handle disconnection etc...
Hi, watched your long distance test video. I can find the code in the file NRF5_SDK_15.2.0_9412b96.
How to change the output power (db type example 2 db or 3db)
Hello, I am currently evaluating the nrf52840 and nrf52832 for the purpose of bluetooth mesh. I found flash usage information in the mesh SDK documentation as follows:
Build...
So I'm very new to the Nordic nRF52 and nRF5 SDK. I'm using the blinky examples as a starting point for a remote control that will drive motors. My customer's question is...
As per my requirement, I need strong pairing mechanism, i am referring ble_app_gls example of nRF5_SDK_15.2.0_9412b96 sdk for checking pairing. As i have seen in the code...
Hi,
I could not find any example of the 802.15.4 stack API that talks directly to the PHY Layer, by means of PD-SAP and PLME-SAP, as shown in this picture:
https://github...
Hi,
I am currently using nrfgo mother board ( nrf6700). I could able to connect to nrfgo studio and see it is connected I can also program external device through ISP. Cant...
Hi,
I got my new PCA10056 development kit. As soon as in connected it with my PC and opened nRF Go studio, a confirmation popped up to update the firmware. I updated the...
