Nordic \ nRF5_SDK_12 nrf52832 using 2.0 _f012efa \ examples \ peripheral \ pwm_driver, pwm_driver example
Want to set up two road PWM phase is different, for example, the...
I'm using nRF52832 and S132 based on nRF5 SDK v14. I get a error code 4 when I add DFU service refer to the experimental_ble_app_buttonless_dfu . The SDK has changed so much...
Hi,
I'm wondering if I can get current transmitting channel during a connection. So
Is there a way I can directly read current transmitting channel?
If not, is...
This question has to do with the observed "recursivity" of the calls to "app_sched_execute" in SDK13 as described in the previously asked question below:
devzone.nordicsemi...
hi.
How do i do ble_app beacon advertisement to one device(Android phone) whose bluetooth address is known ?? I want that beacons should only be seen in nrf_connect app of...
why use 50ms and 400ms connection interval for testing the maximum data throughput(2M,247byte payload)?
Because 50ms can only send a pdu , and 400ms can send up to 8 pdu...
Hi,
I am using Keil IDE to develop nRF51822 project.
in main(), the command line
APP_SCHED_INIT(APP_SCHED_MAX_EVT_SIZE, APP_SCHED_QUEUE_SIZE);
has Error : L6218E...
Hello.
First some background:
I have an application running on nRF52840. Development began with the nRF52832 using nRF SDK 13 or 14. Then migrated to 15.2, 15.3, and finally...
Shalom!
I have a nRF9160 DK board that I am using before our custom hardware prototype is ready. My application is based on the UDP example code skeleton along with code...
Dears,
Is it possible to change the -64dBm threshold to something else in the wireless module? (example: -70dBm, -75dBm).
I´ve seen in some forums that there are other...
Regarding the Nordic guidelines for aQFN, it recommends to use 0.305/0.61 for through hole via pad,
We want to modify the PCB pad as shown in the picture below,
and keep...
Dear ladies and gentlemen,
I found the following page giving instructions for porting an example from pca10056 to pca10056e:
https://infocenter.nordicsemi.com/index.jsp...
We are trying to implement UART driver that will work together with SoftDevice. We can't use UART or UARTE with single-byte buffers since high-priority task like SoftDevice...
Hi,
I am using nRF52840 and Mesh SDK 5.0.0. I want to add a DFU feature in Mesh Light Switch Client and Server example code. I have generated zip files for the Client and...
Hi everyone,
I am new to nrf community. Currently, I am trying to develop an IR transmitter on NRF52832 DK which transmits HEX codes for IR (not raw data). I am unable to...
Hi there,
I worked myself through the Matter DoporLock example including commissioning into a Thread Network using OTBR. I find manually obtaining the credentials from the...
Hi All
Do you know of any Mobile devices/Apps supporting Bluetooth5.1 and Direction-finding currently on the market (or planned to be)?
Is it going to be added to nRF...
err_code = sd_ble_gap_adv_start(m_adv_handle, APP_BLE_CONN_CFG_TAG);
nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
I would like to ask that for the above...
Hi there,
We have a mesh network which runs now for quite some time on our own hardware. We are using heartbeat messages to collect RSSI values between nodes in the network...
Hi Dev team,
I was looking through the documentation of PMIC from the Thingy91 User Guide and I saw that the PMIC in Thingy91 can be used for battery charging (" The PMIC...
