I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi, I've a timer configured by gpiote to capture with a second 'overflow' capture should the signal stop. I'm not using an interrupt instead the CC[0] value is being used...
I have seen the same issue reported.
nRF52840 DK does not appear as a removable drive named "JLINK"
Done the following.
1- My laptop has only one USB port. So I have...
Hi there, I'm controlling the nrf9160 with a esp32 and I'm wondering if you have an recommended libraries for forming AT commands and parsing the return messages?
I'm running through the nrf9160 dk startup guide and I've updated the application and modem firmware. However, it does not look like the application is accepting AT commands...
I have a BL654-DVK (nRF52840) and BL653-DVK (nRF52833). I have a custom program modified from an example that runs and debugs properly on the nRF52840, and am trying to port...
Hi,
We connect our external Board through P20 from EVB NRF52-DK everything goes well.
We are trying to do the same setup on other computer and we get failures to flash...
Hi,
I'm having trouble with debugging the nRF5340. I'm only using the network core and hence use the empty_app_core project for the app core.
The problem i'm facing is...
Hello,
Ubuntu 20.10, nRfConnect v3.6.1, Programmer 1.4.8. Running appimage.
I get:
" Could not fetch memory size of target devkit: Error: Error occured when get library...
hi,
i am working on " ble_app_multilink_central " in ble central . i have connected two peripheral devices .how to include uart in "ble_app_multilink_central" example code...
I have an issue with getting the I/Os correctly setup for antenna switching.
I am running the radio_test example code with the following modifications.
So far, I have...
Hello
I am new to all of this and am wondering if this is possible, and if anyone can point me in the right direction if it is. I am looking to create an open source project...
Hi DevZone Team,
when I use west to configure a project, build/zephyr_settings.txt always contains
"BOARD_ROOT":"/home/user/test/nrf" "DTS_ROOT":"/home/user/test/nrf"...
I am facing one another problem basically i am sending some AT command from central to peripheral but after some time its hang and wait app_erroc. c (__disable_irq();->while...
Hello, I commissioned a factory to make a sample card reader for my company, they didn’t configure everything, because the SDK given to us allows the device to read-only NFC...
Hi
I have a setup with one device and one host, and I want to send data return to the device, but I'm not getting the nrf_gzll_host_rx_data_ready callback no the host. ...
