Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hello, We are developing a library which is intended to use the trustzone feature (TF-M based) available with nrf5340 DK. i.e., CONFIG_BUILD_WITH_TFM=y Here, we would like...
Hi,
I have recently migrated by code from the nRF52832 to the nRF52840 on a custom board. This board uses UART to an STMH7 for the DFU.
When trying to do a DFU in the...
Hi,
When I try to use the Flash Image API on the Network Core I get build errors. The problem seems to be that some symbols are not defined, as there is no MCUboot bootloader...
I am all new to nRF52480 dongle, would like to use Direct mode test getting error message in Direct Test Mode software (v2.0.3).
Can not communicate with device. Make...
Hi
I am working on a BLE project and it requires some specific functionalities. I am not sure if all of them are doable. I have some questions about these. So, if someone...
Hi
After Google's Nest 2th Hub firmware update on December 17, 2022 and Google Home app update to support Matter1.0,
is there any case where the Nordic Thread module was...
I'm working on a project that uses the Fanstel BC840m module. The project uses a custom PCB design, and everything was going smoothly until... I enabled DCDC1, stopped building...
Hi,
I am comparing Asset Tracker v2 in SDK v2.2.0 and v.2.1.1
One of the changes is the newlib-nano C library in v2.2.0. CONFIG_NEWLIB_LIBC_NANO is set to "y" in v2.2...
Hello,
My customer's project is Asset tracker.
Here is scenario.
1. set #XSYSTEMMODE=1,1,1,3 (enable LTE-M and NB-IOT to connect nRF Cloud, enable GNSS, LTE preference...
I start using 2.2.0 SDK and had this error when building zephyr samples external_lib using nrf52833dk_nrf52833.
the problem as show in image:
after some research I found...
Im working with ncs 2.1.2 and trying to build MCUboot
Im trying to follow this instructions( link ) but I get the next log error when I try to build.
What am I doing...
Hi,
i want to receive extended advertising packets with a python script (for external testing). The pc-ble-driver-py approach looks really promising. And i tested the examples...
Good Morning
After successfully completed a multi link BLE + WS2812 on the nrf52840DK to nrf52840 dongle (on SDK5) I though I would try the exact same project on nrf Connect...
