Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Programmer 4.8.0 uses inputCoreInfo.codePageSize as the UICR size. On both an nRF54L15 DK and an nRF54LM20B DK, nrfutil reports codePageSize = 16 and infoPageSize = 4096....
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
Hello,
I am designing a custom board using the nRF54LM20B-CAAA in the CSP61 package .
According to the datasheet, the device has a single-ended RF antenna connection with...
Dear Support Team, We have developed a product based on the nRF5340, using the Insight SIP ISP2053 module. So far, we have built approximately 25 prototype units and around...
Hello Nordic.
Hardware: nrf54lm20A-DK v0.3.4
SDK: 3.4.2
sample: spi_flash
Initially, I tested read/write operations on an external flash using the `spi_flash` example...
Hi everyone,
I try to get manufacturer data with central device.
The peripheral device is normally correctly configured for both advertisement report and scan response...
Hello.
Actually I have two qustions, but they are related with the same challenge.
So, I want to develop application using SDK (libararies and config), but starting from...
Dear ,
Thanks a lot for your time.
We currently have a project using nRF52840 dongle and nRF connect SDK, implementing FATFS and USB MSC SD card examples together.
The...
Hello
When I use ncs1.7.1 52840 + mcuboot + spi + external flash it works well, but when I update ncs to 1.8.0 I can't build it.
I also add CONFIG_MULTITHREADING =y in...
I'm trying to get my nRF9160DK board to connect to nRF Cloud, but I ran into some issues and it's not working. I've followed every step of the nRF9160DK Getting Started Guide...
I have configured the ADC on my nRF52832 to trigger a read based on a PPI timer. I am using EasyDMA to capture 75 samples via double buffering. My PPI timer is configured...
I am migrating my project to C++. Everything in the SDK works so far except NRF_BLE_GATT_DEF(). This returns the error C++ requires a type specifier for all declarations....
I'm using FDS on SDK16.0.0 to store some value, consisting of 12 int32_t values. They are stored correctly, except the first byte. Here is my code used to store :
It prints...
Hello,
is there any way to connect additional sensors using SPI or I2C to the thingy:91?
From the schematics I see test points on the PCB that allow access to the SPI...
Hi, we have a costumer who wants be able to do a firmware update over BLE. We have a running application that takes about 260k of FLASH. This fits in the NRF52832 (512k FLASH...
Hi All,
i have implemented peripheral_cts_client example
but i want to read value once from nrf_connect_app(cts server) then cts has to maintain the time and update it...
Hello sir, I'm now working on the nrf52840 and am having trouble with the sdk config. Initially, I indicated that I was working with spim3 and that it was functioning OK;...
Hi Everyone,
I've just started to work with zephyr, I installed west, the lastest version of the NCS and all the plugins/extensions in Visual Studio, but when I connect...
