I'm in the early stages of building a Thread + CoAP low-power sensor and using the nRF54L15-Tag as a starting point. Using NCS, the lowest idle current I can get is 13 microamps...
We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
I used dfu_bootloader with integrated usb function to perform jump application test, and found that after the disk is mounted to the computer, if the device is not removed...
Hello,
I am developing ble mesh module using nrf52832 and trying to do DFU for over 100 nrf52832 modules.
but sometime i got some problem that .....
(1)
I see a...
HI ,
We use official hardware and software to develop mesh products. Taking light_server as an example, the test is as follows: Hardware: nRF52840-DK Software: nrf5_SDK_for_Mesh_v4...
Hi!
Currently I'm using the nRF5 SDK and successfully configured the SDK to compile the blinky example for pca10059 (nRF52840-Dongle).
When I plug the dongle and program...
After fixing my nRF9160 DK certifications it now connects to the network and LED4 is on solid. Now that it's connected, I need to learn how to connect to a server and pass...
Hi!
I want to use tag-connect without fixation for fast flashing boards. Just plug it in and a script automatically flashes board in seconds. If somebody knows, if it possible...
Hi all,
In BLE app uart coexist example, When programmed successfully, using nrf_connect app, one can see Nordic_UART and Mesh Client being advertisied. The BLE part advertisng...
Hello,
I'm working with an nRF52832, SDK 14.2 and Freertos 8.0.1.
Two tasks are defined, one for led signalling and one where saadc is used to check the battery value...
Hi,
This is actually a follow-up to my previous question here: devzone.nordicsemi.com/.../publish-timeout-handler-of-one-model-called-during-publish-timeout-handler-of-another...
1. I have an nrf9160 module, patched on the customer's own board. 2. I want to connect this board to nrfcloud 3. I read the imei of this nrf9160 module through the software...
Hi, I'm working on NRF52832 ble_upp_multirole_lesc example in SDK15.0.0. When I try to activate its DCDC attribute via NRF_POWER->DCDCEN = POWER_DCDCEN_DCDCEN_Enabled or sd_power_dcdc_mode_set...
Hi Team,
Hope you are doing well, and safe from this pandemic.
I would like to ask that, is there any serialization for zigbee from linux PC?
As we have verified...
Hello,
I noticed in the release notes for nRF Connect SDK v1.2.0 there is a known issue with the nrf_send function as it relates to blocking for several minutes, see below...
Hi,
We have successfully verified "BLE UART and Zigbee Color Dimmer Light Switch Example".
Right now we see there is no support for receiving reports from light bulb example...
Hi,
I recently discovered the platform. I'm trying to modify the examples in order to understand the different ways it works.
My last step was to add a Generic On Off...
