I'm in the early stages of building a Thread + CoAP low-power sensor and using the nRF54L15-Tag as a starting point. Using NCS, the lowest idle current I can get is 13 microamps...
We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Hi all,
I successfully ported the Semtech’s LoRaMac-node (from official GitHub, master branch) to a custom assembly of two dev boards : the NRF52832 (Dev Kit PCA10040) from...
Hello.
I have a nRF9160DK.
I want to try this uart example: https://github.com/Rallare/fw-nrfconnect-nrf/tree/nrf9160_samples/samples/nrf9160/uart
I want to config the...
Hi everyone,
I want to transmit a HEX array I read from a peripheral using SPI communication (I initialize my RX_BUF in the SPI_EVT_HANDLER() function) via BLE. I am using...
Hello All,
I am working on nRF52810 custom board. I used segger studio in windows 7. For reference i used nRF52 SDK 15.2.0.In my application i used i2c peripheral.
My...
Hello,
as I understand the accuracy of the LF Crystal oscillator for the nRF52832 development board DK_PCA10040 ist set within the sdk_config.h in the following way:
...
Using NRF52832 on a custom PCB with 32kHz + 32MHz crystals, very close to the reference schematic
Using NRF52 15.2.0, S132, arm5_no_packs, Kiel uVision 5.23.0.0
The example...
Hi, I am using nRF52832 with sensor and Softdevice S132 v3.0.0 to advertising packets .I The sensor is interfaced with nrf52832 using twi interface. I am updating advertising...
HELLO,
Now i meet a troubole about app_timer in SDK15.0 with NRF52810.
I use the example 0f central with uart. wtih softdevide.
I creat a app_timer with 100ms interval...
Consider, I have checked these threads: https://devzone.nordicsemi.com/f/nordic-q-a/38832/system-on-sleep-mode & https://devzone.nordicsemi.com/f/nordic-q-a/30351/how-to-control...
I come from Linux background, where I've used Callgrind to get the dynamic analysis of callgraph of the firmware. But now I am work in IoT product its bare metal, I am using...
I am using SDK15.2 and I am using ble_app_hrs example to build a device that has multiple sensors and a display.
I am constantly reading sensors data using blocking TWI...
Hi,
I am starting working with nRF 9160 MLM1 Preview DK and installed embedded studio for nordic and imported asset_tracker project but I cann't program the board.
It...
I am looking for Windows 10 Driver that can be connect to remote nRF52832 via BLE (Using standard BLE Dongle in the PC with WIndows 10 ). Can some one give me points from...
Hi,
My question is how to set ShockBurst mode on nRF51 to communicate with nRF2401A? (is that possible)
I tried a micro_esb example on GitHub, but this didn't worked....
