This is a guide showing how to use the Anritsu MT8821C tester against Nordic's nRF9160.
Please use at least Cat-M version 40.10#205, NB IoT version 40.00#013 and Platform SW v40.10S#205 or later versions to have all r...
Introduction
The intention of this guide is to clarify and describe the main aspects relevant to the GNSS receiver functionality on the nRF9160 as well as build configurations, tool recommendations and how to get started with the field measurements. ...
There are different ways of measuring the current consumed by the nRF9160 SIP. Using a dedicated power analyzer is usually the preferred way, as it is often able to accurately measure and plot current draws with a large dynamic range, because of auto...
Note: From NCS v1.7.0 onwards, the settings discussed in this guide are included in the board files for the Thingy:91. Therefore, as long as you build for the thingy91_nrf9160_ns or thingy91_nrf52840, you don't need to follow these steps.
The Thingy...
Background
Some time ago I was working on a project that involved communication between Bluetooth mesh and a home automation platform. The goal of this project was to enable control and observability of Bluetooth mesh light sources from the home auto...
