As the picture shows, I saw this softdevice_hex option available.
The error says, "require nRF_SoftDevice S310_Hex".
But where to this missing component.
My development is totally working. If the software device HEX can be programmed with the project, it will nice. Because I work between S310 and S110, sometimes just forgot which software device I have programmed in. LoL
Hi Paul,
Unfortunately you cannot mix the flashing of your softdevice with your project. You need to have atleast two targets, one for your application and the other to flash softdevice hex file.
Also the flashing through keil must be done seperately for each target. I think you cannot do it in one go unless you merge these two hex files or use nrfjprog tool.
If you already know this, then you might just be asking where to find the missing hex file. All the hex files are located in Keil_v5\ARM\Pack\NordicSemiconductor\nRF_SoftDevice_S110\8.0.0\hex (for example for S110) you see the hex files there. you can find all packs here developer.nordicsemi.com/.../ if there is no hex file in that pack, then probably it is not supported as a pack installer yet.
Attaching the example target contents for S110 that you need to add into uvproj file to see one more target. target.txt
Open .uvproj file and add the contents of this text file as shown in the the image below
you will then see another target and you can later configure its settings however you like in Keil after opening the project.
