Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
nRF54LM20A, NCS v3.4.0: ESB only in the rest of each 20 ms period – esb_init()/esb_disable(), or Timeslot? 0

Before buying two nRF54LM20-DKs, I need to know which way is supported. Our own protocol uses RADIO directly: in each 20 ms period a SYNC goes out at 30 µs, started by a TIMER...
34 views

0 replies

Started 11 hours ago
by Project NIC
Not Answered
Thingy:91X: no path to ECDSA without a larger TF-M partition 0

The Thingy:91 X board files allocate only 32 kB to the TF-M secure partition (slot0_s_partition). This is too small to support CONFIG_TFM_PROFILE_TYPE_MEDIUM, which is required...
36 views

0 replies

Started 1 day ago
by cwalstad
Not Answered
nRF9151 Band 71 Support 0

Why doesn't the nRF9151 support Band 71? It has excellent penetration for IoT applications. Thanks
37 views

0 replies

Started 1 day ago
by Jonsiann
Not Answered
nRF54L15 — External ESD Protection for IEC 61000-4-2 Compliance 0

Hi, I am designing a PCB using the nRF54L15 (QFN, 3.3 V system) that must meet IEC 61000-4-2 Level 3 (±4 kV contact / ±8 kV air discharge). The on-chip ESD rating is only...
- development
- pcb
- nRF54L15
- hardware
46 views

0 replies

Started 1 day ago
by NandanS
Not Answered
nRF54L15 – Direct Access to Channel Sounding (CSTONES/RTT) Hardware Without SoftDevice Controller 0

I am developing a proprietary 2.4 GHz distance measurement with two-way phase-based ranging and RTT on the nRF54L15. I intend to control the RADIO peripheral directly, without...
46 views

0 replies

Started 1 day ago
by Abdel0

Recent in the DevZone Blog

Readiing humidity from HTU21D sensor using TWI

Fredrik Sundt Brynhildsvoll

##Measuring humidity using TWI on nrf52## In this post I will explain how the nRF5x chip can be used to communicate with a sensor over TWI (I2C). To run this example extract the files to examples -…
- 24 Feb 2016
Production release of S130 & S132 v2.0 SoftDevices for the nRF51 and nRF52

Pär H

Since Nordic Semiconductor released the S130 SoftDevice for our nRF51 ICs in early 2015, we have been working hard to make our Bluetooth low energy protocol stacks more feature rich and more configurable…
- 22 Feb 2016
Keil + nrfjprog = true

Øyvind Karlsen

In this blogpost we will demonstrate the usage of Keils integrated command line functionality. We will start nrfjprog through Keil bindings in order to erase our chip and program SoftDevices. nrfjprog…
- 22 Feb 2016
Bluz, a new internet connected dev kit based on the nrf51822, has launched

eric ely

Bluetooth LE is a fantastic technology for battery powered, Internet of Things devices. However, most dev kits require tethering to a smartphone, limiting the range and usefulness to only when the user…
- 19 Feb 2016
Serial DFU Procedure and Tips

Eugene Yu

Serial DFU Procedure and Tips Hi, Some of you may need to use Serial DFU to transfer firmware from external MCU or PC. So I am posting this blog to might help saving your time to debug and development…
- 18 Feb 2016
Changes in the Infocenter

Ruth Fuchss

If you have bookmarked pages in our Infocenter, you might have noticed that many of those links don't work anymore. This is due to major changes to the backend of the Infocenter structure that will make…
- 17 Feb 2016