Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
nRF8001 Setup Error w/ EFM32 0

I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
- nrf8001 setup
1070 views

0 replies

Started over 9 years ago
by delo
Not Answered
Cannot connect or recover nrd51 dk 0

Hi, I have 3 nRF51 DK pca10028 v1.1.0 I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
- nrfgo studio recover jlink
1138 views

0 replies

Started over 9 years ago
by eozkucur
Not Answered

Power Issue with nRF51822 0

Hi Guys, Thanks for your precious time and insight. Let me try to explain what we did, We have developed a custom board After assembling the board, we do a bare board...

573 views

0 replies

Started over 9 years ago
by deepu
Not Answered
ADXL 345 Tutorial 0

Hello all, this tutorial goes to a fellow named Emil who helped me with this project. Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
- ADXL 345
- spi
- adxl
2871 views

0 replies

Started over 9 years ago
by Milad
Not Answered

Revised spi_master to utilize a mask for cs 0

Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...

1031 views

0 replies

Started over 9 years ago
by nszmnsky

Recent in Nordic blog

Debugging with Real Time Terminal

FormerMember

In SDK 12.0.0 or later, logging/debugging over RTT is built in to the logger module NRF_LOG. To enable logging over RTT, "check" the NRF_LOG_BACKEND_SERIAL_USES_RTT option in sdk_config.h in the configuration…
- 8 Apr 2015
Accessing the BLE mesh via the particle.io (spark.io) cloud

David Edwin

Hello. I was spending the last few days to implement an interface to access the BLE mesh via the Internet. The mesh consists of devices with LEDs, which then could be turned on and off in my browser.…
- 1 Apr 2015
How to use the latest Keil 5 for Keil 4 projects (.uvproj)

Stefan Birnir Sverrisson

As many have noticed, Keil 5 does not have native support for Keil 4 projects (project files ending with uvproj), it only has native support for Keil 5 projects (project files ending with uvprojx). However…
- 26 Mar 2015
The Google UriBeacon Project

Jason

Overview The UriBeacon design allows a Bluetooth Low Energy (BLE) device to periodically transmit an ADV packet that contains a URI. This technology enables any device, place or thing to become a beacon…
- 17 Mar 2015
Flashing SoftDevice directly from ARM Keil uVision and Makefile (nRF51 SDK 8.0.0)

Krzysztof Chruscinski

Since nRF51 SDK version 8.0.0 SoftDevices binary files have become a part of the release. In order to make it easier to flash proper type and version of SoftDevice a new feature was added: each project…
- 16 Mar 2015
6LoWPAN for Bluetooth low energy on OpenWRT

Glenn Ruben Bakke

OpenWRT is one of the most popular open source Linux-based router firmware alternatives for commodity routers. From kernel 3.17, Linux has supported 6LoWPAN for Bluetooth low energy (BLE) through the…
- 13 Mar 2015