Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered

Clarification on SWDCLK requirements 0

According to the nRF51 series reference manual. 10.1.2 Debug interface mode Debug interface mode is initiated by clocking one clock cycle on SWDCLK with SWDIO=1. Due...

1521 views

0 replies

Started over 10 years ago
by Charles Manning
Not Answered
How to size PSTORAGE_CMD_QUEUE_SIZE 0

Hi, I was looking at the .map for my project and I noticed that pstorage.c was taking up a bunch of RAM (~600 bytes), which I thought was a lot, so I went into pstrorage_platform...
- ble 110 nrf51822 pstorage
816 views

0 replies

Started over 10 years ago
by Akbar Dhanaliwala
Not Answered
nRF51422 BLE examples missing 0

The document nRF51422_Evaluation_Kit_User_Guide_v2.0.pdf says: Locate the Heart Rate demo project found in the folder ARM\Device\Nordic\nrf51422\Board\pca10003\s310\ble_app_hrs...
- nrf51422 ble
779 views

0 replies

Started over 10 years ago
by rapjr
Not Answered
How to check Beacon battery condition? 0

Using the nRF Beacons app, but cannot see the battery condition of each beacon. Is this already implemented - if so how to turn on? If not how is it implemented?
- bluetooth low energy
- nrf51822
785 views

0 replies

Started over 10 years ago
by nmdjapan
Not Answered

Is Beacon battery condition advertised? 0

Using the nRF Beacons app, but cannot see the battery condition of each beacon. Is this already implemented - if so how to turn on? If not how is it implemented?

688 views

0 replies

Started over 10 years ago
by nmdjapan

Recent in Nordic blog

nRF Connect v1.0 Release Candidate

Hung Bui

Note: This post is outdated. Please go to the product page for nRF Connect for Desktop for updated information and downloads. nRF Connect is the new official name of the Bluetooth Smart tool previously…
- 9 May 2016
How to test nRF52 NFC tag with reader (Adafruit Tag Reader)

Brian Kim

Since NFC is one of new feature on nRF52, some customers often ask how to verify NFC tag they are implementing. The purpose of this blog is to provide how to setup and how the implementation based on SDK…
- 9 May 2016
A modern approach to Bluetooth LE and the Internet of Things

eric ely

Bluetooth LE is ideal for Internet of Things applications where many low powered sensors or devices feed data through a gateway and out onto the internet. An optimal solution would move away from the use…
- 6 May 2016

Latest guides

Getting started: How to add DFU support to your Thingy:91 project

Didrik Rokhaug

Note: From nRF Connect SDK v1.7.0 onwards, if you build for the thingy91_nrf9160_ns or thingy91_nrf52840, everything in this guide is already done automatically. Since that SDK release, the board files…
- 21 Jan 2021
Software: Enter the Multi-NUS: A Simple Wireless UART Network

matt.heins

If you’re thinking about building a network of sensors and you begin to survey the options, you’re likely to encounter a frothing sea of acronyms representing a variety of standards and protocols clamoring…
- 12 Jan 2021
Software and Protocols: nRF9160 DK: Offloading Bluetooth Low Energy related tasks to nRF52840 SoC

Anders Storro

Background Some time ago I was working on a project that involved communication between Bluetooth mesh and a home automation platform. The goal of this project was to enable control and observability of…
- 12 Jan 2021
Bluetooth low energy: How to update advertising data dynamically using BLE Advertising library

Karl Ylvisaker

Introduction The question of how to update advertising data dynamically using the BLE Advertising library has been raised many times by our forum-goers, especially after the release of nRF5 SDK v15.2.0…
- 6 Jan 2021
Software: Device Firmware Update (DFU) with MCUBoot bootloader

Mark Q

Purpose The purpose of this blog is to show how to create a Zephyr application that boots from the MCUBoot bootloader. We will also show how to update an application using the Device Firmware Update (DFU…
- 3 Nov 2020
Software: Building a Bluetooth application on nRF Connect SDK- Comparing and contrasting to SoftDevice based applications - Part 1

Hung Bui

Scope This is a discussion on building a Bluetooth application on our new nRF Connect SDK/Zephyr platform with the reflections to our nRF5 SDK which is based on the SoftDevice Bluetooth stack. The goal is…
- 21 Oct 2020