Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Google: Say hello to OpenSK: a fully open-source security key implementation using nRF52840 Dongle (among others) 0

Google open-sources the firmware needed to build hardware security keys Google open-sourced today OpenSK, a Rust-based project to aid hardware vendors build hardware security...
2726 views

0 replies

Started over 4 years ago
by LarsH
Not Answered
Mesh 4.0 SDK Flash Manager - Storing values 0

I would like to store a simple integer value in the flash write and read after some event. I'm using the mesh example Dimming examples (experimental) in the nRF5 SDK for Mesh...
- development
- software
- flash
- mesh
- nRF Mesh
- nrf52832
805 views

0 replies

Started over 4 years ago
by joao
Not Answered
Python bindings on openwrt? 0

Hello, Has there been any success with getting the python bindings for the pc-ble-driver running on openwrt? I've succeeded with the driver itself but not the bindings....
558 views

0 replies

Started over 4 years ago
by pcav99
Not Answered
Connection approach between central device(scan) and peripheral device(advertise) 0

Hi Nordic Team, In my BLE project I'm creating a Test application which gets all the advertising data from peripheral devices. The complete list of scanned device is received...
567 views

0 replies

Started over 4 years ago
by Aswati Vijaykumar
Not Answered
nrf_inbuilt_key_write buffer length constraint 0

Hello all, According to the documentation and this feedback on a case there is a maximum size for a particular cert before nrf_inbuilt_key_write returns NRF_ENOBUFS . Can...
1175 views

0 replies

Started over 5 years ago
by Daniel Veilleux

Recent in Nordic blog

Bluz, a new internet connected dev kit based on the nrf51822, has launched

eric ely

Bluetooth LE is a fantastic technology for battery powered, Internet of Things devices. However, most dev kits require tethering to a smartphone, limiting the range and usefulness to only when the user…
- 19 Feb 2016
Serial DFU Procedure and Tips

Eugene Yu

Serial DFU Procedure and Tips Hi, Some of you may need to use Serial DFU to transfer firmware from external MCU or PC. So I am posting this blog to might help saving your time to debug and development…
- 18 Feb 2016
Changes in the Infocenter

Ruth Fuchss

If you have bookmarked pages in our Infocenter, you might have noticed that many of those links don't work anymore. This is due to major changes to the backend of the Infocenter structure that will make…
- 17 Feb 2016

Latest guides

Software and Protocols: Automating nRF91 TLS credential management via serial port AT commands

Daniel Veilleux

I have spent a bit of time recently experimenting with different TLS credential configurations using nRF91-DKs. Eventually I got to the point where I wanted to do things like swap out the certificates…
- 10 Jan 2020
Getting started: nRF Connect for Cloud Certificate Update

Joakim

The content of this guide is now covered in the documentation on nrf Connect SDK documentation page.For the most up-to-date instruction to Update Cloud Certificate please follow this link.
- 27 Sep 2019
Getting started: Thingy:91 Firmware Update using MCUboot

Joakim

The nRF Connect Programmer application now also supports MCUboot! Follow these steps to update through the programmer application or the following guide for the command line alternative. This guide shows…
- 23 Sep 2019
Bluetooth low energy: Concurrent Advertising

Håvard

I have been asked several times about variations of the following advertising scenario, so I decided to make a blog post that I can refer to, and hope it might prove useful for others out there that are…
- 9 Sep 2019
Software and Protocols: The four kinds of data you need to consider when developing an IoT product

Markus Tacker (he/him)

In this post I will give you an introduction to the four kinds of data you need to consider when developing an IoT product: Device State Device Configuration Past Data Firmware Updates It's these …
- 9 Sep 2019
Getting Started : Automate building of HEX files for your nRF Connect SDK application using CircleCI or GitHub Actions

Markus Tacker (he/him)

Continuous delivery is in important aspect of short time to market and since the nRF9160 supports firmware over the air updates we want to ship a new firmware to our development boards every time we update…
- 14 Aug 2019