Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Configuring Wakeup by a GPIO on nRF54L15 0

Hi, we want to evaluate the BLE ISP2454-LX chip. To do this we bought from RUTRONIK FRANCE an ISP2454-LX-EB evaluation board with the ISP2454-LX-TB test board. SDK : nRF...
10 views

0 replies

Started 1 hour ago
by Andre MULLER
Not Answered
DECT-NR+ RSSI Temperatur compensation 0

Hello, I am looking about something similiar which I was able to find for IEEE 802.15.4: https://docs.nordicsemi.com/bundle/errata_nRF52840_EngB/page/ERR/nRF52840/EngineeringB...
15 views

0 replies

Started 1 hour ago
by schnitzlein
Not Answered
direction_finding_connectionless_rx只会一直打印[DRIVER]信息，在收到合适的蓝牙时，也不会进行CTE解析、捕获 My direction_finding_connectionless_rx keeps printing [DRIVER] messages continuously. Even when it receives a suitable Bluetooth packet, it does not perform CTE parsing or capture 0

我现在有两块调试板，一块是nRF5340DK，一块是nRF52833DK，我现在在nRF52833DK中烧录了direction_finding_connectionless_rx项目，它的地址是nrf\samples\bluetooth\ direction_finding_connectionless_rx。在nRF5340中烧录了direction_finding_connectionless_tx项目...
20 views

0 replies

Started 2 hours ago
by RZX
Not Answered
case about nRF54LM20B & (protection-set All) 0

Hi, 1. How to set read protection and how to verify read protection for nRF54LM20B? 2. The test DK is PCA10184 0.7.0. 3. My test is as follows: Read protection will never...
23 views

0 replies

Started 6 hours ago
by peter.min
Not Answered
nRF9151 LTE-M: MQTT downlink not always waking device from RRC Idle to RRC Connected when PSM/eDRX are disabled 0

Hi There, I am currently developing an LTE-M application on nrf9151 using ncs v3.2.1, the device is a MQTT client that publishes telemetry periodically every 3 minutes,...
26 views

0 replies

Started 11 hours ago
by felan

Recent in the DevZone Blog

How We Found a Bug In Nordic’s SDK Using Jumper’s Emulator

dansheme

We were trying to run the PPI example from the nRF5 SDK on our emulator. We quickly revealed a bug in the configuration of one of the timers by having a look at the HW log: Check out our Medium b…
- 24 Aug 2017
New Command Line Interface and enhanced Logger - part 2.

Krzysztof Chruscinski

If you haven't yet get to know command line interface (nrf_cli) module significantly improved in nRF5 SDK 14.0.0 please check this blog post: New command line interface - part 1 Enhanced logger and…
- 22 Aug 2017
MultiLink with Peripherals & Centrals in the nRF5 SDK v13

JustinLee

##Introducing concurrent MultiLinks I’d like to inform that it is possible to configure concurrent-multiple connections with several Centrals and Peripherals. This behavior can be possible to use examples…
- 22 Aug 2017
Nordic Thingy:52 Raspberry Pi Python Interface

gamnes

Thingy:52 Python Raspberry Pi Interface This blog is a follow up to both the Nordic Thingy:52 node.js/Raspberry Pi demos and the https://devzone.nordicsemi.com/blogs/1160/walkthrough-of-nordic-thingy52…
- 18 Aug 2017
Driving WS2812B LEDs using I2S on the Nordic nRF52832

Mahesh Venkitachalam

In this article, I use the I2S peripheral of the Nordic nRF52832 to generate the waveforms required to drive the popular WS2812B RGB LEDs. http://electronut.in/nrf52-i2s-ws2812/
- 18 Aug 2017
Walkthrough of Nordic Thingy:52 Node.js Raspberry Pi demos

gamnes

Thingy:52 Node.js Raspberry Pi Interface This blog post is a follow up to the Nordic Thingy:52 node.js/Raspberry Pi demos blog post, and will described how you can run and what to expect from each of…
- 17 Aug 2017