Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
nRF5_SDK_16 : NRF_SECTION_DEF() / NRF_SECTION_START_ADDR() : unnecessary ‘&’ in the definition 0

From "nrf_section.h" (__GNUC__): Example for the section name " log_const_data ": NRF_SECTION_DEF(log_const_data, nrf_log_module_const_data_t) //: extern nrf_log_module_const_data_t...
- development
- software
- s132
- nrf52832
0 views

0 replies

Started 1 hour ago
by dwm
Not Answered
nRF52840 DK dual virtual COM 0

Dear, I am using both nRF52840 UART (UART0 and UARTE1) on the nRF52840 DK. The default pin assignement is used, such as UART0 pins are TX/RX 0.6 & 0.5 and UARTE1...
0 views

0 replies

Started 1 hour ago
by Nop Microwave
Not Answered
How can I add color control capabilities to the matter_bulb example? 0

"I added an endpoint called Matter Extended Color Light to the matter_bulb example. After compiling and flashing the firmware, HomeKit only recognizes and creates two dimmable...
0 views

0 replies

Started 1 hour ago
by OllLlllO
Not Answered
Clarification on nPM1300 Current Measurements 0

Hello, I have a few questions regarding the nPM1300 current measurements: As far as I understand, there are two ways to trigger a current measurement: By writing...
0 views

0 replies

Started 2 hours ago
by Badr
Not Answered
Tone of Tolerance (Power) value for nrf52832 0

Hi, we had used nRF52832 in our product. Our product is undergoing FCC & IC certification. FCC & IC regulatory body had requested to provide Tone of tolerance (Power)...
0 views

0 replies

Started 3 hours ago
by Rahul Wagh

Recent in Nordic blog

Fast Production Screening based upon Bluetooth DTM

Ken L

The challenge As a product is getting into the production phase, the need of a fast and standalone screening facility on the production line arises. Here I'm introducing a production screening setup…
- 9 Dec 2016
I am developing an open source sensor beacon board

zelin

I am developing an open source sensor beacon board named: YS-Beacon which contains: nRF52832 DAPLink - LPC11U35 9-Axis Motion Sensor Ambient Light Sensor、Proximity Sensor and 3D-Gesture Sensor with…
- 2 Dec 2016
nRF52 Rocket: Part I – Introduction to Model Rocketry and its UX Problem

Tony Wu

Official Launch Video Welcome to this 2 or 3-part blog about the nRF52 Rocket, a BLE-enabled model rocket, which you’ve just seen soaring through the air in the video above. In the first part of blog…
- 21 Nov 2016

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021