DFU MTU INCREASE

[massimilianoripa]

Hello,

i am developing an application on NRF52833 chip based on NRF CONNECT SDK V2.5.0.

We want to speed up the dfu process.

We have seen on the documentation that MTU can be up 500 bytes during DFU.

How can we speed up the DFU process increasing MTU and Data Length Extension ?

Thanks

Massimiliano

[AHaug]

Hi,

You can try applying the following configuration to your project to speed up the BLE DFU https://github.com/nrfconnect/sdk-nrf/blob/788b23cf8e20e9dcb1c5b1325c2142db947efb3b/samples/common/mcumgr_bt_ota_dfu/Kconfig#L122-L134 

Let me know if this answers your question

Kind regards;
Andreas

[massimilianoripa]

Hi Andreas,

thanks, now I will try and then I will come back to you.

Thanks

Massimiliano

[Sergey A.]

Hi AHaug 

I've got the same issue. File upload speed through BT SMP is painstakingly slow especially for Matter firmware with MCUboot which are about 800 kB.

What I did is just simply compiled and provisioned Matter lamp example on nRF52840 DK and without modifications you kindly suggested the upload speed was around 1.5 kB/s. After the modifications it became 3.7 kB/s. It's better but still much slower that I would expect. Is it possible to improve it a bit more? 

Kind regards,

Sergey

[AHaug]

Hi Sergey,

Unless you were helped by the suggestion below, then we would like you to create a new case for this and we will assign an available engineer as soon as possible

Kind regards,
Andreas