Update from nRF5 SDK to nRF Connect SDK

[QuentinD]

Hello,

For a month I have been trying to find a solution to update my devices which are at my customers (these devices have a bootloader, softdevice and app coming from the nrf5 SDK) to the mcuboot and app coming from the NCS SDK.

To do this, I relied on this link: https://devzone.nordicsemi.com/f/nordic-q-a/79571/dfu-update-from-nrf5-sdk-to-nrf-connect-sdk

Here are my steps:

1. I modified the secure_bootloader_uart_mbr_pca10056_debug of the nrf5 SDK so that it accepts replacing the sofdevice and the app (nrf5 SDK) with my new app (NCS SDK):
   - comments "return NRF_ERROR_INTERNAL" in the sd_activate() function of the nrf_bootloader_fw_activation.c file
   - comments "result = false;" of the if(SD_MAGIC_NUMBER_GET(sd_start_addr) of the softdevice_info_ok(...) function of the nrf_dfu_validation.c file
2. I created a file containing this bootloader patched with the softdevice and my app (nrf5 SDK):
   nrfutil settings generate --family NRF52840 --application BT840-FW-0.1.0.12.hex --application-version-string "1.0.12" --bootloader-version 3 --bl-settings-version 2 --softdevice BT840- SD-0.7.2.0.hex --key-file priv.pem bootloader_setting.hex
   mergehex --merge bootloader_setting.hex BT840-BL-0.3.hex --output boot_with_settings.hex
   mergehex --merge boot_with_settings.hex BT840-SD-0.7.2.0.hex --output boot_with_settingsAndSofdevice.hex
   mergehex --merge boot_with_settingsAndSofdevice.hex BT840-FW-0.1.0.12.hex --output firmware-BT840-HW3-SD7_2_0-BOOT3-FW1_0_12.hex
3. I uploaded this file to my nrf52840
4. To generate the update packages for the bootloader (MCUboot) and my app from the NCS SDK, I did this:
   nrfutile pkg generate --hw-version 3 --app-boot-validation VALIDATE_GENERATED_CRC --bootloader-version 4 --sd-req 0x0,0xCA,0x0100,0x0101 --bootloader Application/TA_Smart/mcuboot/zephyr/zephyr.hex - -key-file Application/child_image/key/mcuboot_private.pem BT840_update_with_boot.zip
   nrfuutil pkg generate --hw-version 3 --app-boot-validation VALIDATE_GENERATED_CRC --sd-req 0x0,0xCA,0x0100,0x0101 --softdevice Application/TA_Smart/zephyr/app_update.bin --key-file Application/child_image/ key/mcuboot_private.pem BT840_update_with_app.zip
5. I send the DFU update of the softdevice
6. Once it is finished, I send the bootloader DFU update

Here are the logs of these 2 updates:

 Test_update_to_new_sdk.log

Here is the memory map of my devices working with the nrf5 SDK:

mbr: 0x0 -> 0x1000
softdevice: 0x1000 -> 0x27000
app: 0x27000 -> 0xD0000 --------> the application uses BLE and Thread
storage: 0xD0000 -> 0xD1000
unused page: 0xD1000 + 0xE0000
ot_flash_data: 0xE0000 -> 0xE4000
bootloader: 0xE4000 -> 0xF0000
unused_page2: 0xF0000 -> 0xFE000
mbr_params_page: 0xFE000 -> 0xFF000
bootloader_settings_page: 0xFF000 -> 0x100000

Here is the content of my pm_static.yml from my project using the NCS SDK: 

mbr:
  address: 0x0
  region: flash_primary
  size: 0x1000
app:
  address: 0x1200
  region: flash_primary
  size: 0xD0E00
mcuboot:
  address: 0xE4000
  placement:
    after:
    - mcuboot_secondary
  region: flash_primary
  size: 0x1A000
mcuboot_pad:
  address: 0x1000
  placement:
    align:
      start: 0x1000
    before:
    - mcuboot_primary_app
  region: flash_primary
  size: 0x200
mcuboot_primary:
  address: 0x1000
  orig_span: &id001
  - app
  - mcuboot_pad
  region: flash_primary
  sharers: 0x1
  size: 0xD1000
  span: *id001
mcuboot_primary_app:
  address: 0x1200
  orig_span: &id002
  - app
  region: flash_primary
  size: 0xD0E00
  span: *id002
mcuboot_secondary:
  address: 0xD2000
  placement:
    after:
    - mcuboot_primary
    align:
      start: 0x1000
  region: flash_primary
  share_size:
  - mcuboot_primary
  size: 0x10000
settings_storage:
  address: 0xE2000
  placement:
    before:
    - mcuboot
  region: flash_primary
  size: 0x2000
mbr_params_page:
  address: 0xFE000
  region: flash_primary
  size: 0x1000
bootloader_settings_page:
  address: 0xFF000
  region: flash_primary
  size: 0x1000  
sram_primary:
  address: 0x20000000
  region: sram_primary
  size: 0x40000

Additional information:

• After updating the softdevice (step 5), my file was written between address 0x1000 and address 0xC11DF (thus overwriting the old softdevice and app). On the other hand, in the logs, I see "<debug> nrf_dfu_validation: Hash verification. start address: 0x27000, size: 0x9A1D4": is it normal that it says "0x27000" and not "0x1000"?
• If after this update, I send the bootloader (step 6), it also writes the file at address 0x1000 and not at address 0xE4000: do you know why?
• If I update the bootloader before the softdevice, I see in the logs that it starts writing from address 0x99000 (in the logs and physically): why is it at this address?
• It's obvious but of course, my project using the NCS SDK works when I use it with the immutable bootloader + MCUboot + app

Once I updated my device to MCUboot and the app from the NCS SDK, I no longer see anything in the RTT logs and I can't see which instruction the nrf52840 is stuck on.
Do you have any idea where the problem could be coming from?

Thank you

[Sigurd Hellesvik]

Hi

Have you seen  Hang with nRF5 SDK 17.1.0 Bootloader and nRF Connect SDK 2.1.0 application ?

I don't have an answer for all of your questions, so I will ask some questions so we can get more info.

You say you crash after DFU, right. Can I suggest that you try to flash hex files using nrfjprog to the device and see if the application works then?

It's obvious but of course, my project using the NCS SDK works when I use it with the immutable bootloader + MCUboot + app

Do logging work for this?
Do you log from the application only, or also from MCUboot?

Regards,
Sigurd Hellesvik

[QuentinD]

Hi,

Yes I have already seen this link.

Ok I'll test that a bit later.

Yes, I activated the MCUboot and app logs: both work.

Another question: here I do a softdevice update (in this file, I have my NCS SDK app) which overwrites the memory area of the softdevice but also a part of the memory area of the app. So, when the bootloader restarts it will consider the softdevice is validated but the app is invalidated. So how can I make it jump to address 0x1000 (new app address) after the update?

[Sigurd Hellesvik]

QuentinD said:

here I do a softdevice update (in this file, I have my NCS SDK app) which overwrites the memory area of the softdevice but also a part of the memory area of the app. So, when the bootloader restarts it will consider the softdevice is validated but the app is invalidated. So how can I make it jump to address 0x1000 (new app address) after the update?

It is possible to do a simultaneous bootloader and softdevice update with the nRF5 bootloader, which would solve this issue.

In general, have you considered running MCUboot on top of the nRF5 bootloader, such as can be done with the nRF52840Dongle? That solution would be instead of the solution you are currently trying to implement. Just wanted to make sure you know about all your options. And running both can in many cases be the easier option.

[QuentinD]

No, the problem is that after the update, the app will be invalidated and therefore, since the app is invalid, it will no longer jump and will therefore remain in the bootlaoder.

Yes I had already seen this solution but how can I overwrite the softdevice and the nrf5 bootloader with this solution?

In this link (devzone.nordicsemi.com/.../hang-with-nrf5-sdk-17-1-0-bootloader-and-nrf-connect-sdk-2-1- 0-application), if I understand the solution given by Vidar correctly, it's to do an "app update" with a file containing the new app and the MCUboot. But then, how are these files transferred to the right addresses so as to overwrite the old bootloader and softdevice?

[Sigurd Hellesvik]

QuentinD said:

if I understand the solution given by Vidar correctly, it's to do an "app update" with a file containing the new app and the MCUboot. But then, how are these files transferred to the right addresses so as to overwrite the old bootloader and softdevice?

The nRF5 bootloader has a feature to update both the bootloader and softdevice at the same time.
This feature is used to overwrite the bootloader with the MCUboot and the softdevice with the new app.

QuentinD said:

n this link (devzone.nordicsemi.com/.../hang-with-nrf5-sdk-17-1-0-bootloader-and-nrf-connect-sdk-2-1- 0-application),

Can I suggest that you test the sample that Vidar has uploaded there, to learn the procedure?

[Sigurd Hellesvik]

Bonus:
I found this blog on the subject from somewhere else which might be of some help:
https://www.embeddedrelated.com/showarticle/1573.php. It is not from us, so take it with a pinch of salt