Thingy:53: Programming

Requesting help on Thingy:53.
I have couple of boards. I was able to program all of them. For programming I use VSCode or prgrammer with precompiled firmware.
Now, scene enters Thingy:53. I have tried all methods of programming. VSCode & Programmer (hex) & Programmer (MCU bootloader).
None of them ever did start BLE module. I seem to have device connected, just not able to program it.
I can see device when I connect via cable & nRF52DK. Meaning Updating through external debug probe. Meaning using 10-pin 2x5 socket-socket 1.27 mm IDC Serial Wire Debug (SWD).
I cannot see bootloader in programmer, as described Bootloader Thingy:53.
I carefully followed instructions from developer.nordicsemi.com/.../thingy53_gs.html
Screens show I tried using precompiled downloadable firmware.
None helped.
What I might be doing wrong?
Using nrfutil-device version: 2.0.3
Using nrf-device-lib version: 0.17.3
Using nrfjprog DLL version: 10.23.1
Using JLink version: JLink_V7.88j
Parents Reply Children
  • I did. I did see success. The same would be for VSC. I press program button, board is programmed. No errors.

    Only thing - no light turns on and BLE module would not be started.

  • Here is also sussessful log of programming via VSC.

    -- runners.nrfjprog: Flashing file: ....project_path..../build/zephyr/merged_domains.hex
    -- runners.nrfjprog: ....project_path..../build/zephyr/merged_domains.hex targets both nRF53 coprocessors; splitting it into: ....project_path..../build/zephyr/GENERATED_CP_NETWORK_merged_domains.hex and ....project_path..../build/zephyr/GENERATED_CP_APPLICATION_merged_domains.hex
    [ ######               ]   0.000s | Erase file - Check image                                                   [ ###                  ]   0.000s | Check image validity - Initialize device info                              [ ######               ]   0.000s | Check image validity - Check region 0 settings                             [ ##########           ]   0.000s | Check image validity - block 1 of 4                                        [ #############        ]   0.022s | Check image validity - block 2 of 4                                        [ ################     ]   0.010s | Check image validity - block 3 of 4                                        [ #################### ]   0.062s | Check image validity - Finished                                            [ #############        ]   0.000s | Erase file - Erasing                                                       [ #####                ]   0.000s | Erasing non-volatile memory - block 1 of 3                                 [ ##########           ]   1.063s | Erasing non-volatile memory - block 2 of 3                                 [ ###############      ]   0.386s | Erasing non-volatile memory - block 3 of 3                                 [ #################### ]   0.000s | Erasing non-volatile memory - Erase successful                             [ #################### ]  10.155s | Erase file - Done erasing                                                          
    [ ######               ]   0.000s | Program file - Checking image                                              [ ###                  ]   0.000s | Check image validity - Initialize device info                              [ ######               ]   0.000s | Check image validity - Check region 0 settings                             [ ##########           ]  10.311s | Check image validity - block 1 of 4                                        [ #############        ]   5.316s | Check image validity - block 2 of 4                                        [ ################     ]   2.115s | Check image validity - block 3 of 4                                        [ #################### ]   0.028s | Check image validity - Finished                                            [ #############        ]   0.000s | Program file - Programming                                                 [ #####                ]   0.000s | Programming image - block 1 of 3                                           [ ##########           ]   0.147s | Programming image - block 2 of 3                                           [ ###############      ]   0.051s | Programming image - block 3 of 3                                           [ #################### ]   0.000s | Programming image - Write successful                                       [ #################### ]   1.363s | Program file - Done programming                                                    
    [ ######               ]   0.000s | Verify file - Check image                                                  [ ###                  ]   0.000s | Check image validity - Initialize device info                              [ ######               ]   0.000s | Check image validity - Check region 0 settings                             [ ##########           ]  11.798s | Check image validity - block 1 of 4                                        [ #############        ]   6.083s | Check image validity - block 2 of 4                                        [ ################     ]   2.421s | Check image validity - block 3 of 4                                        [ #################### ]   0.033s | Check image validity - Finished                                            [ #############        ]   0.000s | Verify file - Verifying                                                    [ #####                ]   0.000s | Verifying image - block 1 of 3                                             [ ##########           ]   0.145s | Verifying image - block 2 of 3                                             [ ###############      ]   0.050s | Verifying image - block 3 of 3                                             [ #################### ]   0.000s | Verifying image - Verify successful                                        [ #################### ]   1.389s | Verify file - Done verifying                                                       
    [ ######               ]   0.000s | Erase file - Check image                                                   [ ####                 ]   0.000s | Check image validity - Initialize device info                              [ ########             ]   0.000s | Check image validity - Check region 0 settings                             [ ############         ]   0.000s | Check image validity - block 1 of 3                                        [ ################     ]   0.008s | Check image validity - block 2 of 3                                        [ #################### ]   0.039s | Check image validity - Finished                                            [ #############        ]   0.000s | Erase file - Erasing                                                       [ ######               ]   0.000s | Erasing non-volatile memory - block 1 of 2                                 [ #############        ]   0.966s | Erasing non-volatile memory - block 2 of 2                                 [ #################### ]   0.000s | Erasing non-volatile memory - Erase successful                             [ #################### ]   7.385s | Erase file - Done erasing                                                          
    [ ######               ]   0.000s | Program file - Checking image                                              [ ####                 ]   0.000s | Check image validity - Initialize device info                              [ ########             ]   0.000s | Check image validity - Check region 0 settings                             [ ############         ]   5.081s | Check image validity - block 1 of 3                                        [ ################     ]   1.906s | Check image validity - block 2 of 3                                        [ #################### ]   0.011s | Check image validity - Finished                                            [ #############        ]   0.000s | Program file - Programming                                                 [ ######               ]   0.000s | Programming image - block 1 of 2                                           [ #############        ]   0.228s | Programming image - block 2 of 2                                           [ #################### ]   0.000s | Programming image - Write successful                                       [ #################### ]   1.671s | Program file - Done programming                                                    
    [ ######               ]   0.000s | Verify file - Check image                                                  [ ####                 ]   0.000s | Check image validity - Initialize device info                              [ ########             ]   0.000s | Check image validity - Check region 0 settings                             [ ############         ]   6.307s | Check image validity - block 1 of 3                                        [ ################     ]   2.366s | Check image validity - block 2 of 3                                        [ #################### ]   0.011s | Check image validity - Finished                                            [ #############        ]   0.000s | Verify file - Verifying                                                    [ ######               ]   0.000s | Verifying image - block 1 of 2                                             [ #############        ]   0.223s | Verifying image - block 2 of 2                                             [ #################### ]   0.000s | Verifying image - Verify successful                                        [ #################### ]   1.680s | Verify file - Done verifying                                                       
    Applying pin reset.
    -- runners.nrfjprog: Board with serial number 1050350826 flashed successfully.
     *  Terminal will be reused by tasks, press any key to close it. 
    

  • Any suggestions how can I make it work?  ? I did follow your advice on type of files.

    As I mentioned, I can see programming is done correctly. No lights or BLE module turned on.

  • Hi Yuri, sorry for the delay.

    Which sample did you select?

    After programming the sample, could you check in Programmer whether the bootloader is present?

    What happens if you try Serial Terminal in nRF Connect for Desktop? Is there any log output?

  • I did try to use precompiled Peripheral_LBS -> peripheral_lbs_2.5.0_thingy53_nrf5340.zip

    I also tried to program via VS different samples like bliky and peripheral.

    Not sure what you mean by 

    Programmer whether the bootloader is present?

    If that :

    In the Programmer navigation bar, click SELECT DEVICE.
    A drop-down menu appears.
    In the drop-down menu, select Bootloader Thingy:53.

    Than no, I do not see Bootloader Thingy:53.

    I do not see any output in Serial Terminal in nRF Connect for Desktop.

Related