Hi,
We have our custom PCB with an nRF9160 SIP that is connected to a nRF9161-DK via P20. I have a couple questions about this setup.
- Is it fine for us to program the external nRF9160 SIP with a nRF9161-DK? We'll soon upgrade to the 61 chips, so thought we would saving purchasing an nRF9160-DK.
- We can successfully flash and make LEDs blink with this setup. However, when we try to communicate with the board using the serial terminal (and AT_Client example successfully flashed), it appears to continue working only with the nRF9161 SIP that is on the DK. We want to test eh AT_Client with our external SIP.
- Is there something we need to do physically beyond using just the SWD pins to enable serial communication.
- Our board configuration selected is the nRF9160dk_nrf9160. Do we need to adjust this to enable serial communication with the external SIP.
Cheers,
Callum