build sid_end_device error

[666]

=== child image mcuboot - begin ===
loading initial cache file C:/Users/Administrator/sid_end_device_3/build/mcuboot/child_image_preload.cmake
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/ncs/bootloader/mcuboot/boot/zephyr
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/ce3b5ff664/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/ncs/zephyr/.cache
-- Zephyr version: 3.6.99 (C:/ncs/ncs/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf52840dk, qualifiers: nrf52840
-- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/ce3b5ff664/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/ce3b5ff664/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/ce3b5ff664/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/ncs/zephyr/boards/nordic/nrf52840dk/nrf52840dk_nrf52840.dts
-- Found devicetree overlay: C:/ncs/ncs/bootloader/mcuboot/boot/zephyr/app.overlay
-- Found devicetree overlay: C:/ncs/ncs/nrf/modules/mcuboot/usb.overlay
-- Generated zephyr.dts: C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/dts.cmake
Parsing C:/ncs/ncs/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration 'C:/ncs/ncs/zephyr/boards/nordic/nrf52840dk/nrf52840dk_nrf52840_defconfig'
Merged configuration 'C:/ncs/ncs/bootloader/mcuboot/boot/zephyr/prj.conf'
Merged configuration 'C:/ncs/ncs/bootloader/mcuboot/boot/zephyr/boards/nrf52840dk_nrf52840.conf'
Merged configuration 'C:/ncs/ncs/nrf/subsys/partition_manager/ext_flash_mcuboot_secondary.conf'
Merged configuration 'C:/ncs/ncs/nrf/subsys/partition_manager/partition_manager_enabled.conf'
Merged configuration 'C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/misc/generated/extra_kconfig_options.conf'
Configuration saved to 'C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/.config'
Kconfig header saved to 'C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/include/generated/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/ce3b5ff664/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/ce3b5ff664/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
CMake Warning at C:/ncs/ncs/nrf/lib/flash_patch/CMakeLists.txt:8 (message):

----------------------------------------------------------
--- WARNING: To maintain the integrity of secure boot, ---
--- enable CONFIG_DISABLE_FLASH_PATCH in production. ---
----------------------------------------------------------

CMake Deprecation Warning at C:/ncs/ncs/nrf/cmake/partition_manager.cmake:32 (message):

---------------------------------------------------------------------
--- WARNING: Child and parent image functionality is deprecated ---
--- and should be replaced with sysbuild. Child and parent image ---
--- support remains only to allow existing customer applications ---
--- to build and allow porting to sysbuild, it is no longer ---
--- receiving updates or new features and it will not be possible ---
--- to build using child/parent image at all in nRF Connect SDK ---
--- version 2.9 onwards. ---
---------------------------------------------------------------------
Call Stack (most recent call first):
C:/ncs/ncs/zephyr/cmake/modules/kernel.cmake:253 (include)
C:/ncs/ncs/zephyr/cmake/modules/zephyr_default.cmake:141 (include)
C:/ncs/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
C:/ncs/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
CMakeLists.txt:12 (find_package)

MCUBoot bootloader key file: C:/ncs/ncs/bootloader/mcuboot/root-ec-p256.pem
-- Configuring done
-- Generating done
-- Build files have been written to: C:/Users/Administrator/sid_end_device_3/build/mcuboot
=== child image mcuboot - end ===

CMake Warning at C:/ncs/ncs/nrf/modules/mcuboot/CMakeLists.txt:382 (message):

---------------------------------------------------------
--- WARNING: Using default MCUBoot key, it should not ---
--- be used for production. ---
---------------------------------------------------------

CMake Warning at C:/ncs/ncs/zephyr/CMakeLists.txt:2027 (message):
__ASSERT() statements are globally ENABLED

CMake Deprecation Warning at C:/ncs/ncs/nrf/cmake/partition_manager.cmake:32 (message):

---------------------------------------------------------------------
--- WARNING: Child and parent image functionality is deprecated ---
--- and should be replaced with sysbuild. Child and parent image ---
--- support remains only to allow existing customer applications ---
--- to build and allow porting to sysbuild, it is no longer ---
--- receiving updates or new features and it will not be possible ---
--- to build using child/parent image at all in nRF Connect SDK ---
--- version 2.9 onwards. ---
---------------------------------------------------------------------
Call Stack (most recent call first):
C:/ncs/ncs/zephyr/cmake/modules/kernel.cmake:253 (include)
C:/ncs/ncs/zephyr/cmake/modules/zephyr_default.cmake:141 (include)
C:/ncs/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
C:/ncs/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
CMakeLists.txt:10 (find_package)

-- Found partition manager static configuration: C:/Users/Administrator/sid_end_device_3/pm_static_nrf52840dk_nrf52840.yml
Partition 'mcuboot' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_pad' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_primary' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_primary_app' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_secondary' is not included in the dynamic resolving since it is statically defined.
Partition 'settings_storage' is not included in the dynamic resolving since it is statically defined.
-- Configuring done
-- Generating done
-- Build files have been written to: C:/Users/Administrator/sid_end_device_3/build
-- west build: building application
[6/407] Generating include/generated/version.h
-- Zephyr version: 3.6.99 (C:/ncs/ncs/zephyr), build: v3.6.99-ncs2
[6/186] Generating include/generated/version.h
-- Zephyr version: 3.6.99 (C:/ncs/ncs/zephyr), build: v3.6.99-ncs2
[181/186] Linking C executable zephyr\zephyr_pre0.elf
FAILED: zephyr/zephyr_pre0.elf zephyr/zephyr_pre0.map C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/zephyr_pre0.map
cmd.exe /C "cd . && C:\ncs\toolchains\ce3b5ff664\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -gdwarf-4 zephyr/CMakeFiles/zephyr_pre0.dir/misc/empty_file.c.obj -o zephyr\zephyr_pre0.elf zephyr/CMakeFiles/offsets.dir/./arch/arm/core/offsets/offsets.c.obj -fuse-ld=bfd -T zephyr/linker_zephyr_pre0.cmd -Wl,-Map=C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/zephyr_pre0.map -Wl,--whole-archive app/libapp.a zephyr/libzephyr.a zephyr/arch/common/libarch__common.a zephyr/arch/arch/arm/core/libarch__arm__core.a zephyr/arch/arch/arm/core/cortex_m/libarch__arm__core__cortex_m.a zephyr/arch/arch/arm/core/mpu/libarch__arm__core__mpu.a zephyr/lib/libc/minimal/liblib__libc__minimal.a zephyr/lib/libc/common/liblib__libc__common.a zephyr/soc/soc/nrf52840/libsoc__nordic.a zephyr/drivers/clock_control/libdrivers__clock_control.a zephyr/drivers/console/libdrivers__console.a zephyr/drivers/flash/libdrivers__flash.a zephyr/drivers/gpio/libdrivers__gpio.a zephyr/drivers/pinctrl/libdrivers__pinctrl.a zephyr/drivers/serial/libdrivers__serial.a zephyr/drivers/timer/libdrivers__timer.a modules/nrf/lib/fprotect/lib..__nrf__lib__fprotect.a modules/nrf/drivers/hw_cc3xx/lib..__nrf__drivers__hw_cc3xx.a modules/mcuboot/boot/bootutil/zephyr/libmcuboot_util.a modules/hal_nordic/nrfx/libmodules__hal_nordic__nrfx.a modules/segger/libmodules__segger.a -Wl,--no-whole-archive zephyr/kernel/libkernel.a -L"c:/ncs/toolchains/ce3b5ff664/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/thumb/v7e-m+fp/hard" -LC:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr -lgcc zephyr/arch/common/libisr_tables.a -mcpu=cortex-m4 -mthumb -mabi=aapcs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mfp16-format=ieee -Wl,--gc-sections -Wl,--build-id=none -Wl,--sort-common=descending -Wl,--sort-section=alignment -Wl,-u,_OffsetAbsSyms -Wl,-u,_ConfigAbsSyms -nostdlib -static -Wl,-X -Wl,-N -Wl,--orphan-handling=warn -Wl,-no-pie C:/ncs/ncs/nrfxlib/crypto/nrf_cc310_platform/lib/cortex-m4/hard-float/no-interrupts/libnrf_cc310_platform_0.9.19.a C:/ncs/ncs/nrfxlib/crypto/nrf_cc310_bl/lib/cortex-m4/hard-float/no-interrupts/libnrf_cc310_bl_0.9.12.a && cmd.exe /C "cd /D C:\Users\Administrator\sid_end_device_3\build\mcuboot\zephyr && C:\ncs\toolchains\ce3b5ff664\opt\bin\cmake.exe -E true""
c:/ncs/toolchains/ce3b5ff664/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe: zephyr\zephyr_pre0.elf section `text' will not fit in region `FLASH'
c:/ncs/toolchains/ce3b5ff664/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe: region `FLASH' overflowed by 4042 bytes
collect2.exe: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
[235/407] Linking C static library zephyr\subsys\bluetooth\crypto\libsubsys__bluetooth__crypto.a
FAILED: modules/mcuboot/mcuboot_subimage-prefix/src/mcuboot_subimage-stamp/mcuboot_subimage-build mcuboot/zephyr/zephyr.hex mcuboot/zephyr/zephyr.elf C:/Users/Administrator/sid_end_device_3/build/modules/mcuboot/mcuboot_subimage-prefix/src/mcuboot_subimage-stamp/mcuboot_subimage-build C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/zephyr.hex C:/Users/Administrator/sid_end_device_3/build/mcuboot/zephyr/zephyr.elf
cmd.exe /C "cd /D C:\Users\Administrator\sid_end_device_3\build\mcuboot && C:\ncs\toolchains\ce3b5ff664\opt\bin\cmake.exe --build . --"
[253/407] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/hci_core.c.obj
ninja: build stopped: subcommand failed.
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\ce3b5ff664\opt\bin\cmake.EXE' --build 'c:\Users\Administrator\sid_end_device_3\build'

Background: Using default demo sie_end_device without any changes, v2.7.0 SDK，compiling other demos is normal

[dejans]

Hi,

Background: Using default demo sie_end_device without any changes, v2.7.0 SDK，compiling other demos is normal

Can you provide a link to this default demo which you used?

Can you provide your build command?

Did you build mentioned demo from VS Code or from command line?

You could try to adjust partition sizes in your pm_static file.

Best regards,
Dejan

[dejans]

Hi,

I have done some testing and could not reproduce your error. 
I have followed the guide for setting up Sidewalk as NCS repository. After that I ran "west build -b nrf52840dk/nrf52840 sid_end_device" command form v2.7.0\sidewalk\samples folder. Building process completed successfully.

Best regards,
Dejan

[666]

I am using VS code and  a custom board instead of DK, but because the chip inside is NRF52840, the board target selected is NRF52840DK/NRF52840，

Then click on 'build configuration', and a build error will appear.

I created a demo by "copy a sample" and then searching for sid_end_device

“You could try to adjust partition sizes in your pm_static file”Where can I modify this?

[666]

 note:I can build successfully using the v2.6.0 SDK

[dejans]

Hi,

666 said:

“You could try to adjust partition sizes in your pm_static file”Where can I modify this?

You can find static partition file pm_static_nrf52840dk_nrf52840.yml inside your sid_end_device project folder but since I cannot reproduce your issue you should probably not focus on this file at the moment.

You could try to replicate what I have done previously (please refer my previous reply) and build from command line. I have also tried building from VS Code with the same build configuration as in your screenshot and could not reproduce your error. When using VS Code try to add sample as application (do not copy the sample). Both options (building from command line, and from VS Code without copying the sample) work fine on my side.

Best regards,
Dejan