No board named 'nrf54l15pdk_nrf54l15_cpuapp' found.

[AntonL]

Hello,

I followed Getting started guide for the nRF54L15 PDK (Getting started with the nRF54L15 PDK (nordicsemi.com))  and bumped into a problem when i try to build "hello world" app.  I get the No board named 'nrf54l15pdk_nrf54l15_cpuapp' found. message. 

I have started with SDK version 2.6.9, but I have also  tried also SDK v2.7.0 and get exactly the same error.  The only difference from the guide is that it is written to checkout 2.6.99-cs1 but such branch doesn't exist. SO I have tried  "v2.6.99-cs2-branch" for the SDK v 2.6.9 and v2.7-brnach for SDK v 2.7.0.

The interesting thing is that I can see the nrf54l15pdk_nrf54l15_cpuapp_ns board if I run "west boards" on the "v2.6.99-cs2-branch" branch but no "nrf54l15...." boards on v2.7-branch".

I'll appreciate any hints.

Best Regards,
Anton

[Vidar Berg]

Hello Anton, 

The equivalent build target to nrf54l15pdk_nrf54l15_cpuapp in SDK v2.7.0 will be  nrf52840pdk/nrf54l15/cpuapp nrf54l15pdk/nrf54l15/cpuapp. 

The syntax change is due to the new HW model introduced in this SDK version. For more information about this change, please refer to the migration document: https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_hwmv2.html 

Best regards,

Vidar

[AntonL]

Hello Vidar,

Thank you for the hint and the link. However, if I  write "west build -b nrf52840pdk/nrf54l15/cpuapp" I get the same error message "No board named 'nrf52840pdk/nrf54l15/cpuapp' found."

However if just run "west boards" I can see the Nrf54L15 board 

This is for SDK v2.6.2 on the v2.6.99-ncs1-branch.

Best Regards,
Anton

[Vidar Berg]

Hello Anton,

Sorry, I meant to write nrf54l15pdk/nrf54l15/cpuapp

Best regards,

Vidar

[AntonL]

Thanks for the update but it is the same reuslt for me "No board named 'nrf54l15pdk/nrf54l15/cpuapp' found."

Could it be due to the wrong git branch? I have tried v2.7.0-ncs1-branch and several other v2.6.x-ncs1-brnach branches.

[Vidar Berg]

You should use the release tag 'v2.7.0'. You can change directory to 'nrf' in your SDK tree and run 'git describe' to ensure you are using this tag. If you are not on this tag, run 'git checkout v2.7.0' followed by 'west update'.

'west boards | grep nrf54l' should return 'nrf54l15pdk' if you are on the correct version.

[AntonL]

thank you for helping me out. 

If I check out tag v2.7.0ncs1 and then run "west update" and then "west build -b nrf54l15pdk/nrf54l15/cpuapp" from  C:\ncs\v2.7.0\zephyr\samples\hello_world I stil get the same error.

I wonder what I am doing wrong ....

[Vidar Berg]

The tag name is "v2.7.0". The log also shows that you are building with an older version of Zephyr (v3.3.99 instead of v3.6.99), which indicates that you may be building against a different SDK. 

Can you run 'west topdir' to see where your current west workspace is located?

[AntonL]

west topdir returns C:/ncs/v2.7.0 for me.





Thanks for pointing out the zephyr version, I installed it for 6 months ago for working with another board and thought that when I checkout git brancvh or tag than  Zephyr in ncs folder is used. I guess I need to updated my installation.

But how do you get the "v2.7.0" tag? my git tag -n command returns only following tags that start with v2.7.0 

v2.7.0-ncs1 sdk-zephyr v2.7.0-ncs1
v2.7.0-ncs1-rc1 sdk-zephyr v2.7.0-ncs1-rc1
v2.7.0-ncs1-rc2 sdk-zephyr v2.7.0-ncs1-rc2
v2.7.0-ncs1-snapshot1 sdk-zephyr v2.7.0-ncs1-snapshot1
v2.7.0-ncs1-snapshot2 sdk-zephyr 2.7.0-ncs1-snapshot2

[Vidar Berg]

In addition to running 'west topdir', please run 

$ west config --local -l

to list your current workspace configuration (or post the C:/ncs/v2.7.0/.west/config file). I want to make sure it sets the zephyr base to C:/ncs/v2.7.0/zephyr and not the other zephyr repo you had in c:/zephyr/

The reason you are not finding the "v2.7.0" tag is that you are not in the 'nrf' repo, but the 'zephyr' repo. The 'nrf' west manifest selects the "v3.6.99-ncs2" tag for Zephyr.  So the zephyr revision should become updated to "v3.6.99-ncs2" after you run 

$ west update

.

Here are the results from when I run these commands here if you want to compare:

OptiPlex-7070:~/ncs/v2.7.0/nrf$ git fetch
OptiPlex-7070:~/ncs/v2.7.0/nrf$ git tag -n | grep "v2.7.0"
v2.7.0          sdk-nrf v2.7.0
v2.7.0-rc1      sdk-nrf 2.7.0-rc1
v2.7.0-rc2      sdk-nrf 2.7.0-rc2
v2.7.0-rc3      sdk-nrf 2.7.0-rc3
OptiPlex-7070:~/ncs/v2.7.0/nrf$ git checkout v2.7
v2.7.0        v2.7.0-rc1    v2.7.0-rc2    v2.7.0-rc3    v2.7.99-cs1   v2.7.99-cs2   v2.7-branch   
OptiPlex-7070:~/ncs/v2.7.0/nrf$ git checkout v2.7.0
M	applications/ipc_radio/prj.conf
M	applications/ipc_radio/src/main.c
M	cmake/sysbuild/b0_mcuboot_signing.cmake
M	samples/bootloader/src/main.c
HEAD is now at 5cb85570ca version: Update to 2.7.0
OptiPlex-7070:~/ncs/v2.7.0/nrf$ west update
=== updating zephyr (zephyr):
HEAD is now at 100befc70c7 [nrf fromtree] sysbuild: introduce sysbuild_root for root adjustment
=== updating bsim (tools/bsim):
HEAD is now at 68f6282 developer_set: Remove .git suffix in paths
=== updating hostap (modules/lib/hostap):
HEAD is now at 6311fde66 [nrf noup] mbedtls: Fix memory leak
=== updating wfa-qt-control-app (modules/lib/wfa-qt-control-app):
HEAD is now at 9f91589 [nrf noup] zephyr: Fix POSIX failures
=== updating mcuboot (bootloader/mcuboot):
M	boot/bootutil/src/loader.c
M	boot/bootutil/src/swap_move.c
M	boot/bootutil/src/swap_scratch.c
HEAD is now at daf2946a [nrf noup] boot/../loader: reboot after updating s0/s1
=== updating qcbor (modules/tee/tf-m/qcbor):
HEAD is now at 751d365 restore inc/qcbor.h for backwards compatibility (#181)
=== updating mbedtls (modules/crypto/mbedtls):
HEAD is now at 72868c6f1 [nrf noup] Add MBEDTLS_PSA_CRYPTO_CLIENT support for TLS/DTLS and X.509
=== updating oberon-psa-crypto (modules/crypto/oberon-psa-crypto):
HEAD is now at e0800ec [nrf noup] Allow import and destroy of builtin keys
=== updating nrfxlib (nrfxlib):
HEAD is now at 37e2ac22 nrf_modem: doc: add info about PDN down when NRF_SO_KEEPOPEN is used
=== updating trusted-firmware-m (modules/tee/tf-m/trusted-firmware-m):
HEAD is now at 553c47a6a [nrf noup] Fix version warning
=== updating psa-arch-tests (modules/tee/tf-m/psa-arch-tests):
HEAD is now at 94a349d [nrf fromlist] Fix base address for the nrf watchdog
=== updating matter (modules/lib/matter):
HEAD is now at 022f2c92f6 [nrf toup] Fix missing network band in scan response.
Synchronizing submodule url for 'third_party/nlio/repo'
Synchronizing submodule url for 'third_party/nlassert/repo'
Synchronizing submodule url for 'third_party/nlunit-test/repo'
Synchronizing submodule url for 'third_party/pigweed/repo'
Synchronizing submodule url for 'third_party/jsoncpp/repo'
=== updating soc-hwmv1 (modules/soc-hwmv1):
HEAD is now at 32b1ee3 soc: Update Kconfig.peripherals from sdk-zephyr bdda11b
=== updating cjson (modules/lib/cjson):
HEAD is now at c6af068 [nrf fromtree] fix: potential memory leak in merge_patch() (#611)
=== updating find-my (find-my):
HEAD is now at be39fa1 doc: releases: Add release notes for v2.7.0
=== updating azure-sdk-for-c (modules/lib/azure-sdk-for-c):
HEAD is now at 308c171c [nrf fromlist] Make repository a Zephyr module
=== updating cirrus (modules/hal/cirrus-logic):
HEAD is now at 3873a08 Added missing curly brace for #ifdef __cplusplus
=== updating openthread (modules/lib/openthread):
HEAD is now at a57d927b0 [string] add `ParseDigit()`, `ParseHexDigit()`, and other helper functions (#10282)
=== updating suit-generator (modules/lib/suit-generator):
HEAD is now at 3458313 feat: add binary file name value to template generator
=== updating suit-processor (modules/lib/suit-processor):
HEAD is now at 4505925 Fix coverity issues for 2.7 release
=== updating cmock (test/cmock):
HEAD is now at f65066f Merge pull request #404 from tz18/patch-1
Synchronizing submodule url for 'vendor/c_exception'
Synchronizing submodule url for 'vendor/unity'
=== updating memfault-firmware-sdk (modules/lib/memfault-firmware-sdk):
HEAD is now at 3d51c80 Memfault Firmware SDK 1.6.0 (Build 5464)
=== updating coremark (modules/benchmark/coremark):
HEAD is now at d5fad6b Merge pull request #51 from volodymyr-bondarchuk/zephyr
=== updating canopennode (modules/lib/canopennode):
HEAD is now at dec12fa stack: map CANopenNode crc16_ccitt() to Zephyr crc16_itu_t()
=== updating chre (modules/lib/chre):
HEAD is now at 3b32c76e zephyr: link the .unstable_id data in ROM
=== updating lz4 (modules/lib/lz4):
HEAD is now at 8e303c2 zephyr: make this repo a zephyr module
=== updating nanopb (modules/lib/nanopb):
HEAD is now at 7f88274 Add migration note about CMake protoc default (#958)
=== updating tf-m-tests (modules/tee/tf-m/tf-m-tests):
HEAD is now at 85f533a Crypto: Use RSA key in PSA format
=== updating zscilib (modules/lib/zscilib):
HEAD is now at ee1b287 samples/tests: Update for hwmv2 board names
=== updating cmsis (modules/hal/cmsis):
HEAD is now at 4b96cbb doc: Update documentations for CMSIS 5.9.0
=== updating cmsis-dsp (modules/lib/cmsis-dsp):
HEAD is now at 6489e771 do not generate warnings when scalar functions are used with MVE
=== updating cmsis-nn (modules/lib/cmsis-nn):
HEAD is now at 0c8669d Merge pull request #1 from XenuIsWatching/zephyr
=== updating edtt (tools/edtt):
HEAD is now at 64e5105 edttt_bsim: Avoid infinite exception loop
=== updating fatfs (modules/fs/fatfs):
HEAD is now at 427159b zephyr: fix ffconf.h override use of STRINGIZE
=== updating hal_nordic (modules/hal/nordic):
HEAD is now at ab5cb2e nrfx: drivers: nrfx_gpiote: move enabling GPIOTE port interrupt
=== updating hal_st (modules/hal/st):
HEAD is now at b77157f drivers: sensor: st: Move to vendor subdirectory
=== updating hal_wurthelektronik (modules/hal/wurthelektronik):
HEAD is now at e5bcb2e Update WE sensors SDK to version 2.5.0
=== updating libmetal (modules/hal/libmetal):
HEAD is now at 243eed5 lib: update libmetal to SHA f55c02a7b582
=== updating liblc3 (modules/lib/liblc3):
HEAD is now at 1a5938e meson: Bump to version 1.0.4
=== updating littlefs (modules/fs/littlefs):
HEAD is now at 408c16a Merge pull request #14 from de-nordic/update-to-v2.8.1
=== updating loramac-node (modules/lib/loramac-node):
HEAD is now at fb00b383 zephyr: configure FragDecoder using Kconfig
=== updating lvgl (modules/lib/gui/lvgl):
HEAD is now at 2b498e6f Merge pull request #51 from faxe1008/upddate_lvgl_840
=== updating mipi-sys-t (modules/debug/mipi-sys-t):
HEAD is now at 71ace1f mipi_syst: fix build error when having protocol timestamp disabled
=== updating net-tools (tools/net-tools):
HEAD is now at 7c7a856 websocket-console: Add a helper script for websocket console
=== updating nrf_hw_models (modules/bsim_hw_models/nrf_hw_models):
HEAD is now at 36b1271 54L15: Added RRAMC, RRAM & UICR
=== updating open-amp (modules/lib/open-amp):
HEAD is now at da78aea lib: update open-amp lib to release v2023.10.0
=== updating picolibc (modules/lib/picolibc):
HEAD is now at 764ef4e40 Version 1.8.6
=== updating segger (modules/debug/segger):
HEAD is now at b011c45 segger: config: Add CCM option for linker sections
=== updating tinycrypt (modules/crypto/tinycrypt):
HEAD is now at 1012a3e Fix warnings reported by UBSAN
=== updating uoscore-uedhoc (modules/lib/uoscore-uedhoc):
HEAD is now at 150f4eb [zephyr fromlist] Adapt to changes in name generation in zcbor 0.8.0
=== updating zcbor (modules/lib/zcbor):
HEAD is now at 75d0880 tests: Update mps2 board name
OptiPlex-7070:~/ncs/v2.7.0$ west topdir
/home/ncs/v2.7.0
OptiPlex-7070:~/ncs/v2.7.0$ west config --local -l
manifest.path=nrf
manifest.file=west.yml
zephyr.base=zephyr
build.sysbuild=True

OptiPlex-7070:~/ncs/v2.7.0/zephyr/samples/hello_world$ west build -b nrf54l15pdk/nrf54l15/cpuapp -p
-- west build: making build dir /home/ncs/v2.7.0/zephyr/samples/hello_world/build pristine
-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: /home/ncs/toolchains/e9dba88316/usr/local/bin/python3.9 (found suitable version "3.9.18", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/.cache/zephyr
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf54l15pdk, Revision: 0.3.0, qualifiers: nrf54l15/cpuapp
Parsing /home/ncs/v2.7.0/zephyr/share/sysbuild/Kconfig
Loaded configuration '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/_sysbuild/empty.conf'
Merged configuration '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/_sysbuild/empty.conf'
Merged configuration '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/_sysbuild/empty.conf'
Configuration saved to '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/zephyr/.config'
Kconfig header saved to '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/_sysbuild/autoconf.h'
-- 
   *********************************
   * Running CMake for hello_world *
   *********************************

Loading Zephyr default modules (Zephyr base).
-- Application: /home/ncs/v2.7.0/zephyr/samples/hello_world
-- CMake version: 3.21.0
-- Using NCS Toolchain 2.6.20240605.1004412633878 for building. (/home/ncs/toolchains/e9dba88316/cmake)
-- Found Python3: /home/ncs/toolchains/e9dba88316/usr/local/bin/python3 (found suitable version "3.9.18", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/.cache/zephyr
-- Zephyr version: 3.6.99 (/home/ncs/v2.7.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf54l15pdk, Revision: 0.3.0, qualifiers: nrf54l15/cpuapp
-- Found host-tools: zephyr 0.16.5 (/home/ncs/toolchains/e9dba88316/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.5 (/home/ncs/toolchains/e9dba88316/opt/zephyr-sdk)
-- Found Dtc: /home/ncs/toolchains/e9dba88316/usr/local/bin/dtc (found suitable version "1.5.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ncs/v2.7.0/zephyr/boards/nordic/nrf54l15pdk/nrf54l15pdk_nrf54l15_cpuapp.dts
-- Generated zephyr.dts: /home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: /home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world/zephyr/dts.cmake
Parsing /home/ncs/v2.7.0/zephyr/Kconfig
Loaded configuration '/home/ncs/v2.7.0/zephyr/boards/nordic/nrf54l15pdk/nrf54l15pdk_nrf54l15_cpuapp_defconfig'
Merged configuration '/home/ncs/v2.7.0/zephyr/samples/hello_world/prj.conf'
Merged configuration '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world/zephyr/.config.sysbuild'
Configuration saved to '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world/zephyr/.config'
Kconfig header saved to '/home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world/zephyr/include/generated/autoconf.h'
-- Found GnuLd: /home/ncs/toolchains/e9dba88316/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd (found version "2.38") 
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: /home/ncs/toolchains/e9dba88316/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc
-- Using ccache: /home/ncs/toolchains/e9dba88316/usr/bin/ccache
-- Configuring done
-- Generating done
-- Build files have been written to: /home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world
-- Configuring done
-- Generating done
-- Build files have been written to: /home/ncs/v2.7.0/zephyr/samples/hello_world/build
-- west build: building application
[5/10] Performing build step for 'hello_world'
[1/141] Preparing syscall dependency handling

[5/141] Generating include/generated/version.h
-- Zephyr version: 3.6.99 (/home/ncs/v2.7.0/zephyr), build: v3.6.99-ncs2
[141/141] Linking C executable zephyr/zephyr.elf
Memory region         Used Size  Region Size  %age Used
           FLASH:       25458 B      1428 KB      1.74%
             RAM:        4576 B       188 KB      2.38%
        IDT_LIST:          0 GB        32 KB      0.00%
Generating files from /home/ncs/v2.7.0/zephyr/samples/hello_world/build/hello_world/zephyr/zephyr.elf for board: nrf54l15pdk
[10/10] Generating ../merged.hex

[AntonL]

Thank you Vidar for your help, I have updated the ZEPHYR_BASE environment variable to  point to zephyr folder under ncs folder (c:\ncs\v2.7.0\zephyr\) and checke out the v2.7.0 in the  c:\ncs\v2.7.0\ncs repo and that resolved my compilation issue. 

[Vidar Berg]

Thank you for the update. I wrongfully assumed that setting ZEPHYR_BASE to point to another zephyr folder would cause west to switch workspace. I'll remember this next time.