End Device Joining as New Device When Steering Mode Stopped

[Kavitha]

We are working on a Zigbee-based network coordinator using the nRF52840. Our end device is connected to the coordinator, but when the end device leaves the network, it sometimes automatically joins the same coordinator, even though the coordinator is not in steering mode. This issue is inconsistent, occurring only at certain times.

In the coordinator, we stop the steering mode using the following function:

void stop_steering() 
{ 
   ZB_SCHEDULE_APP_ALARM_CANCEL(steering_finished, ZB_ALARM_ANY_PARAM); 
   LOG_INF("Network stopped"); 
   zb_bdb_close_network(buffer);
 } 

We have analyzed the Wireshark logs (attached DeviceJoined_NotInSteering).
DeviceJoined_NotInSteering.pcapng
In packet 750, the device leaves the network, but it joins, even though steering mode was not active. From our analysis, we suspect that in packet 712, the association permit was false, but it became true in packet 725, which may have caused the device to join. 

Please find my following questions:
1.Why is the association permit true when the coordinator is not in steering mode?
2.If we stop steering before 3 minutes using the stop_steering function, does it permanently stop steering, or could steering continue in the background?

Please Note: The end device is not rejoining. it is joining again as a new device.

Hardware: Custom hardware with nRF52840
SDK: nRF Connect SDK version 2.1.0

Thanks, and regards,
Kavitha

[AHaug]

Hi Kavitha,

I've queried the developers regarding your questions for some verification w.r.t what is going on. I will reach out to you shortly with a status report and with an answer when I hear back from them regarding this

Kind regards,
Andreas

[Kavitha]

Hello AHaug ,

I wanted to clarify something regarding the code snippet I shared earlier. In the actual implementation of the stop_steering() function, I had included the line to initialize the buffer (zb_bufid_t buffer = 0;), but I accidentally missed sharing it in the snippet provided.

Here is the corrected version:

void stop_steering() 
{ 
   ZB_SCHEDULE_APP_ALARM_CANCEL(steering_finished, ZB_ALARM_ANY_PARAM); 
   LOG_INF("Network stopped"); 
   zb_bufid_t buffer = 0; 
   zb_bdb_close_network(buffer);
} 

We would greatly appreciate your quick response to resolve the issue at your earliest convenience.

[AHaug]

Hi,

Good timing! I just got an update from the developers. I'll bring the information you've added to the discussion as well.

We have done some preliminary testing and have not encountered any anomalies in the operation of zb_bdb_close_network() so far. The coordinator does not behave as you describe after closing the network, it does not resume a "association permit: true".

In other words we need to isolate the reason for "This issue is inconsistent, occurring only at certain times".

Could you supply an answer the following:

• from what context is the void stop_steering() mentioned in the description used in the application
  (is it perhaps part of the reaction to some zb_zdo_app_signal_type_t signal?)

• is zb-scheduler used to call stop_steering/ zb_bdb_close_network, i.e. by the ZB_SCHEDULE_APP_CALLBACK/ZB_SCHEDULE_APP_ALARM macro, or is the use direct?

• it might also be useful to know the details of the configuration (CONFIG_ZIGBEE_..), e.g. by sharing the "application/build/zephyr/.config" file.

Additionally, if we knew whether the your device that is operating on "Custom hardware with nRF52840" had physical access to the UART interface, we could consider configuring the ZBOSS traces functionality (Technical Documentation to help with debugging and ask if you could share the collected logs.

Kind regards,
Andreas

[AHaug]

Hi, 

We would also be interested in checking the zb_bdb_close_network() result (RET_OK/RET_NO_MEMORY/RET_ERROR). The code shows that the return code is ignored. Could you check this?

The discussion with them leads us to the following hypothesis:

1. The "positive permission" observed by the customer seems to be an anomaly. At least that's what the protocol spec says: possible ZC reactions to AssociationRequest, BeaconRequest, .. are given, but when macAssociationPermit is "false" then in no case is a response containing permission:true allowed.

2. According to doc/spec: zb_bdb_close_network() results in the use of a primitive for disabling permissions without a time limit. So yes, in other words the expected behavior is to close network permanently.

Of course, let's keep in mind that:

• we don't know if zb_bdb_close_network() is effective, because in some cases (like some buffer allocation error) it may not be

• maybe something additional (another request?) that we don't know about yet changes the ZC device's behavior

Kind regards,
Andreas

[Kavitha]

Hi AHaug ,

Please find my answer to your questions below:

1.No, it is not part of the reaction to any zb_zdo_app_signal_type_t signal.
2.No, we are not using the ZB-Scheduler to call stop_steering()/zb_bdb_close_network(). We are directly calling the functions.
3.Please find the attached .config file:

Fullscreen config_file.txt Download

CONFIG_GPIO=y
# CONFIG_SPI is not set
# CONFIG_I2C is not set
# CONFIG_KSCAN is not set
# CONFIG_WIFI is not set
# CONFIG_NET_L2_ETHERNET is not set
# CONFIG_IEEE802154_RF2XX is not set
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME="IEEE802154_nrf5"
CONFIG_GPIO_INIT_PRIORITY=40
# CONFIG_MODEM is not set
# CONFIG_UART_INTERRUPT_DRIVEN is not set
CONFIG_NET_IPV6=y
# CONFIG_NET_CONFIG_NEED_IPV6 is not set
CONFIG_SENSOR=y
CONFIG_BOARD="nrf52840dk_nrf52840"
CONFIG_SOC="nRF52840_QIAA"
CONFIG_SOC_SERIES="nrf52"
CONFIG_NUM_IRQS=48
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=32768
CONFIG_CLOCK_CONTROL_INIT_PRIORITY=30
CONFIG_FLASH_SIZE=1024
CONFIG_FLASH_BASE_ADDRESS=0x0
CONFIG_HEAP_MEM_POOL_SIZE=2048
CONFIG_ROM_START_OFFSET=0
CONFIG_PINCTRL=y
# CONFIG_WATCHDOG is not set
CONFIG_SOC_HAS_TIMING_FUNCTIONS=y
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT=y
# CONFIG_CORTEX_M_SYSTICK is not set
CONFIG_PM=y
# CONFIG_PM_DEVICE is not set
CONFIG_IEEE802154_NRF5=y
CONFIG_CLOCK_CONTROL=y
CONFIG_NRF_RTC_TIMER=y
CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768
CONFIG_BUILD_OUTPUT_HEX=y
CONFIG_SERIAL_INIT_PRIORITY=55
CONFIG_FPU=y
# CONFIG_MBEDTLS is not set
# CONFIG_CODE_DATA_RELOCATION is not set
# CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS is not set
# CONFIG_TINYCRYPT is not set
# CONFIG_NET_L2_IEEE802154 is not set
# CONFIG_IEEE802154_KW41Z is not set
CONFIG_SERIAL=y
# CONFIG_SRAM_VECTOR_TABLE is not set
# CONFIG_IEEE802154_CC13XX_CC26XX is not set
# CONFIG_IEEE802154_CC13XX_CC26XX_SUB_GHZ is not set
CONFIG_MP_NUM_CPUS=1
CONFIG_PLATFORM_SPECIFIC_INIT=y

#
# Modules
#

#
# Available modules.
#

#
# nrf (D:/eurogatewaycode/external/nrf)
#
CONFIG_NUM_METAIRQ_PRIORITIES=0
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2560
CONFIG_MAIN_STACK_SIZE=2048
# CONFIG_INIT_STACKS is not set
# CONFIG_NET_IPV6_NBR_CACHE is not set
# CONFIG_NET_IPV6_MLD is not set
CONFIG_NET_PKT_RX_COUNT=4
CONFIG_NET_PKT_TX_COUNT=4
# CONFIG_IEEE802154_2015 is not set
CONFIG_NET_PKT_TXTIME=y
CONFIG_NET_PKT_TIMESTAMP=y
# CONFIG_IEEE802154_CSL_ENDPOINT is not set

#
# Nordic nRF Connect
#
CONFIG_WARN_EXPERIMENTAL=y
CONFIG_PRIVILEGED_STACK_SIZE=1024
CONFIG_MCUMGR_BUF_SIZE=384
CONFIG_ENTROPY_GENERATOR=y
CONFIG_INIT_ARCH_HW_AT_BOOT=y
CONFIG_NORDIC_QSPI_NOR=y
CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096
CONFIG_NCS_SAMPLES_DEFAULTS=y

#
# Image build variants
#
# CONFIG_NCS_IS_VARIANT_IMAGE is not set
# CONFIG_NCS_MCUBOOT_IN_BUILD is not set
# end of Image build variants

#
# Bootloader
#
# CONFIG_BUILD_S1_VARIANT is not set
# CONFIG_SECURE_BOOT is not set
CONFIG_PM_PARTITION_SIZE_PROVISION=0x1000
# CONFIG_B0_MIN_PARTITION_SIZE is not set
CONFIG_PM_PARTITION_SIZE_B0_IMAGE=0x8000
# CONFIG_SECURE_BOOT_CRYPTO is not set

#
# Secure Boot firmware validation
#
CONFIG_SB_VALIDATION_INFO_MAGIC=0x86518483
CONFIG_SB_VALIDATION_POINTER_MAGIC=0x6919b47e
CONFIG_SB_VALIDATION_INFO_CRYPTO_ID=1
CONFIG_SB_VALIDATION_INFO_VERSION=2
CONFIG_SB_VALIDATION_METADATA_OFFSET=0
CONFIG_SB_VALIDATE_FW_SIGNATURE=y
# end of Secure Boot firmware validation
# end of Bootloader

#
# Bluetooth Low Energy
#

#
# BLE over nRF RPC
#
# end of BLE over nRF RPC
# end of Bluetooth Low Energy

#
# DFU
#
CONFIG_DFU_MULTI_IMAGE=y
CONFIG_DFU_MULTI_IMAGE_MAX_IMAGE_COUNT=1
CONFIG_DFU_TARGET=y
CONFIG_DFU_TARGET_MCUBOOT=y
CONFIG_DFU_TARGET_STREAM=y
# CONFIG_DFU_TARGET_MCUBOOT_SAVE_PROGRESS is not set
# end of DFU

# CONFIG_ESB is not set
# CONFIG_EMDS is not set

#
# Peripheral CPU DFU (PCD)
#
# CONFIG_PCD is not set
# CONFIG_PCD_APP is not set
# CONFIG_PCD_NET is not set
# end of Peripheral CPU DFU (PCD)

#
# Networking
#

#
# Application protocols
#

#
# nRF Cloud
#

#
# Client ID (nRF Cloud Device ID)
#
CONFIG_NRF_CLOUD_CLIENT_ID_SRC_COMPILE_TIME=y
CONFIG_NRF_CLOUD_CLIENT_ID="my-client-id"
# end of Client ID (nRF Cloud Device ID)

# CONFIG_NRF_CLOUD_MQTT is not set
# CONFIG_NRF_CLOUD_FOTA is not set
# CONFIG_NRF_CLOUD_FOTA_FULL_MODEM_UPDATE is not set
# CONFIG_NRF_CLOUD_REST is not set
# CONFIG_NRF_CLOUD_GATEWAY is not set
# end of nRF Cloud

# CONFIG_REST_CLIENT is not set
# CONFIG_DOWNLOAD_CLIENT is not set
# CONFIG_AWS_IOT is not set
# CONFIG_AWS_JOBS is not set
# CONFIG_AZURE_IOT_HUB is not set

#
# Self-Registration (Zi ZHu Ce)
#
# end of Self-Registration (Zi ZHu Ce)

# CONFIG_ICAL_PARSER is not set
# CONFIG_FTP_CLIENT is not set
# CONFIG_LWM2M_CLIENT_UTILS is not set
# end of Application protocols

#
# Link layer options
#
# CONFIG_NET_L2_NRF_WIFI_MGMT is not set
# CONFIG_NET_L2_NRF_WIFI_SHELL is not set
# end of Link layer options
# end of Networking

#
# NFC
#
CONFIG_NFC_NDEF=y
# CONFIG_NFC_NDEF_PARSER is not set
# CONFIG_NFC_NDEF_PAYLOAD_TYPE_COMMON is not set
CONFIG_NFC_NDEF_MSG=y
CONFIG_NFC_NDEF_RECORD=y
# CONFIG_NFC_NDEF_TEXT_RECORD is not set
# CONFIG_NFC_NDEF_TNEP_RECORD is not set
CONFIG_NFC_NDEF_URI_MSG=y
CONFIG_NFC_NDEF_URI_REC=y
# CONFIG_NFC_NDEF_CH_MSG is not set
# CONFIG_NFC_NDEF_CH_REC is not set
# CONFIG_NFC_NDEF_LAUNCHAPP_MSG is not set
# CONFIG_NFC_NDEF_LAUNCHAPP_REC is not set
CONFIG_NDEF_FILE_SIZE=1024
# CONFIG_NFC_T2T_PARSER is not set
CONFIG_NFC_T4T_NDEF_FILE=y
# CONFIG_NFC_T4T_ISODEP is not set
# CONFIG_NFC_T4T_APDU is not set
# CONFIG_NFC_T4T_CC_FILE is not set
# CONFIG_NFC_T4T_HL_PROCEDURE is not set
CONFIG_NFC_PLATFORM=y
CONFIG_NFCT_IRQ_PRIORITY=1
# CONFIG_NFC_TNEP_TAG is not set
# CONFIG_NFC_TNEP_POLLER is not set
# CONFIG_NFC_TNEP_CH is not set
# end of NFC

# CONFIG_APP_EVENT_MANAGER is not set
# CONFIG_NRF_PROFILER is not set

#
# SPM
#
# CONFIG_SPM is not set
# CONFIG_IS_SPM is not set
# end of SPM

# CONFIG_FW_INFO is not set

#
# Debug
#
# CONFIG_PPI_TRACE is not set
# CONFIG_CPU_LOAD is not set
# end of Debug

#
# Nordic MPSL
#
# CONFIG_MPSL_FEM_DEVICE_CONFIG_254 is not set
# CONFIG_MPSL_CX is not set
CONFIG_MPSL_THREAD_COOP_PRIO=8
CONFIG_MPSL_WORK_STACK_SIZE=1024
CONFIG_MPSL_TIMESLOT_SESSION_COUNT=0
# CONFIG_MPSL_ASSERT_HANDLER is not set
# end of Nordic MPSL

# CONFIG_CHIP is not set

#
# Partition Manager
#
CONFIG_PARTITION_MANAGER_ENABLED=y
CONFIG_FLASH_MAP_CUSTOM=y
CONFIG_SRAM_SIZE=256
CONFIG_SRAM_BASE_ADDRESS=0x20000000

#
# Zephyr subsystem configurations
#
CONFIG_PM_PARTITION_SIZE_NVS_STORAGE=0x6000
CONFIG_PM_PARTITION_SIZE_ZBOSS_NVRAM=0x8000
CONFIG_PM_PARTITION_SIZE_ZBOSS_PRODUCT_CONFIG=0x1000
# end of Zephyr subsystem configurations

#
# NCS subsystem configurations
#
CONFIG_PM_SINGLE_IMAGE=y
CONFIG_PM_EXTERNAL_FLASH_BASE=0
# CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK is not set
CONFIG_PM_SRAM_BASE=0x20000000
CONFIG_PM_SRAM_SIZE=0x40000
# end of Partition Manager

#
# nRF RPC (Remote Procedure Call) library
#
# end of nRF RPC (Remote Procedure Call) library

CONFIG_ZIGBEE=y

#
# Zigbee libraries
#
CONFIG_ZIGBEE_FOTA=y
# CONFIG_ZIGBEE_FOTA_GENERATE_LEGACY_IMAGE_TYPE is not set
CONFIG_ZIGBEE_FOTA_HW_VERSION=52
CONFIG_ZIGBEE_FOTA_DATA_BLOCK_SIZE=64
CONFIG_ZIGBEE_FOTA_ENDPOINT=1
CONFIG_ZIGBEE_FOTA_PROGRESS_EVT=y
CONFIG_ZIGBEE_FOTA_MANUFACTURER_ID=0x1037
CONFIG_ZIGBEE_FOTA_IMAGE_TYPE=0x141
CONFIG_ZIGBEE_FOTA_COMMENT="gateway"
# CONFIG_ENABLE_ZIGBEE_FOTA_MIN_HW_VERSION is not set
# CONFIG_ENABLE_ZIGBEE_FOTA_MAX_HW_VERSION is not set
CONFIG_ZIGBEE_FOTA_SERVER_DISOVERY_INTERVAL_HRS=24
CONFIG_ZIGBEE_FOTA_IMAGE_QUERY_INTERVAL_MIN=60
CONFIG_ZIGBEE_APP_UTILS=y
CONFIG_ZIGBEE_PANID_CONFLICT_RESOLUTION=y
CONFIG_ZIGBEE_FACTORY_RESET=y
CONFIG_FACTORY_RESET_PRESS_TIME_SECONDS=5
# CONFIG_ZIGBEE_SCENES is not set
# CONFIG_ZIGBEE_SHELL is not set
# end of Zigbee libraries

CONFIG_NET_L2_ZIGBEE=y
# CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_SINGLE is not set
CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
CONFIG_ZIGBEE_CHANNEL_MASK=0x7FFF800
# CONFIG_ZIGBEE_ROLE_END_DEVICE is not set
# CONFIG_ZIGBEE_ROLE_ROUTER is not set
CONFIG_ZIGBEE_ROLE_COORDINATOR=y
CONFIG_ZBOSS_DEFAULT_THREAD_PRIORITY=3
CONFIG_ZBOSS_DEFAULT_THREAD_STACK_SIZE=2048
CONFIG_ZIGBEE_APP_CB_QUEUE_LENGTH=10
# CONFIG_ZIGBEE_DEBUG_FUNCTIONS is not set
CONFIG_ZBOSS_RESET_ON_ASSERT=y
# CONFIG_ZBOSS_HALT_ON_ASSERT is not set

#
# Zigbee Log configuration
#
CONFIG_ZBOSS_ERROR_PRINT_TO_LOG=y
CONFIG_ZIGBEE_ERROR_TO_STRING_ENABLED=y
CONFIG_ZBOSS_TRACE_LOG_LEVEL_OFF=y
CONFIG_ZBOSS_TRACE_LOG_LEVEL=0
CONFIG_ZBOSS_TRACE_MASK=0x0000
CONFIG_ZBOSS_TRACE_HEXDUMP_LOGGING=y
# CONFIG_ZBOSS_TRACE_BINARY_LOGGING is not set
CONFIG_ZBOSS_TRACE_LOGGER_BUFFER_SIZE=4096
# end of Zigbee Log configuration

#
# ZBOSS OSIF configuration
#
CONFIG_ZIGBEE_HAVE_SERIAL=y
# CONFIG_ZIGBEE_HAVE_ASYNC_SERIAL is not set
# CONFIG_ZIGBEE_USE_SOFTWARE_AES is not set
# CONFIG_ZIGBEE_USE_LEDS is not set
# CONFIG_ZIGBEE_USE_DIMMABLE_LED is not set
# CONFIG_ZIGBEE_USE_BUTTONS is not set
CONFIG_ZIGBEE_NVRAM_PAGE_COUNT=2
CONFIG_ZIGBEE_TC_REJOIN_ENABLED=y
CONFIG_ZIGBEE_TIME_COUNTER=y
# CONFIG_ZIGBEE_TIME_KTIMER is not set
# end of ZBOSS OSIF configuration

CONFIG_APP_LINK_WITH_ZIGBEE=y

#
# Full Modem Firmware Update Management(FMFU)
#
# end of Full Modem Firmware Update Management(FMFU)

# CONFIG_CAF is not set

#
# Nordic IEEE 802.15.4
#
CONFIG_NRF_802154_RADIO_CONFIG=y
CONFIG_NRF_802154_RADIO_CONFIG_PRIO=91
CONFIG_NRF_802154_ACK_TIMEOUT_CUSTOM_US=0
# end of Nordic IEEE 802.15.4

# CONFIG_DM_MODULE is not set

#
# Libraries
#

#
# Binary libraries
#
# end of Binary libraries

# CONFIG_ADP536X is not set
# CONFIG_AT_MONITOR is not set
# CONFIG_DISABLE_FLASH_PATCH is not set
# CONFIG_LTE_LINK_CONTROL is not set
CONFIG_NRF_ACL_FLASH_REGION_SIZE=0x1000
CONFIG_FPROTECT_BLOCK_SIZE=0x1000
# CONFIG_FPROTECT is not set
CONFIG_DK_LIBRARY=y
CONFIG_DK_LIBRARY_BUTTON_SCAN_INTERVAL=10
CONFIG_DK_LIBRARY_DYNAMIC_BUTTON_HANDLERS=y
# CONFIG_MODEM_INFO is not set
CONFIG_MULTITHREADING_LOCK=y
CONFIG_RESET_ON_FATAL_ERROR=y
# CONFIG_SMS is not set
# CONFIG_SUPL_CLIENT_LIB is not set
# CONFIG_DATE_TIME is not set
# CONFIG_RAM_POWER_DOWN_LIBRARY is not set
# CONFIG_WAVE_GEN_LIB is not set
# CONFIG_HW_UNIQUE_KEY_LOAD is not set
CONFIG_HW_UNIQUE_KEY_PARTITION_SIZE=0x1000
# CONFIG_MODEM_JWT is not set
# CONFIG_QOS is not set
# end of Libraries

#
# Device Drivers
#
# CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE is not set
# CONFIG_ENTROPY_CC3XX is not set
CONFIG_HW_CC3XX=y
# CONFIG_ETH_RTT is not set
# CONFIG_SENSOR_SIM is not set
# CONFIG_SENSOR_STUB is not set
# CONFIG_PMW3360 is not set
# CONFIG_PAW3212 is not set
# CONFIG_NRF_SW_LPUART is not set
CONFIG_NRFX_GPIOTE_NUM_OF_EVT_HANDLERS=1
CONFIG_CLOCK_CONTROL_MPSL=y
CONFIG_SOC_FLASH_NRF_RADIO_SYNC_MPSL=y
CONFIG_SOC_FLASH_NRF_RADIO_SYNC_MPSL_TIMESLOT_SESSION_COUNT=1
CONFIG_TEMP_NRF5_MPSL=y
# end of Device Drivers

#
# External libraries
#
# end of External libraries

#
# Test
#
CONFIG_ZTEST_MULTICORE_DEFAULT_SETTINGS=y
# CONFIG_UNITY is not set
# end of Test
# end of Nordic nRF Connect

CONFIG_ZEPHYR_NRF_MODULE=y
# end of nrf (D:/eurogatewaycode/external/nrf)

#
# hostap (D:/eurogatewaycode/external/modules/lib/hostap)
#
CONFIG_ZEPHYR_HOSTAP_MODULE=y
# end of hostap (D:/eurogatewaycode/external/modules/lib/hostap)

#
# mcuboot (D:/eurogatewaycode/external/bootloader/mcuboot)
#

#
# MCUboot
#
CONFIG_SIGN_IMAGES=y
# CONFIG_BOOT_BUILD_DIRECT_XIP_VARIANT is not set
# CONFIG_MCUBOOT_BUILD_STRATEGY_USE_HEX_FILE is not set
# CONFIG_MCUBOOT_BUILD_STRATEGY_SKIP_BUILD is not set
CONFIG_MCUBOOT_BUILD_STRATEGY_FROM_SOURCE=y
CONFIG_MCUBOOT_IMAGE_VERSION="69.0.68"
CONFIG_MCUBOOT_FLASH_WRITE_BLOCK_SIZE=4
CONFIG_DT_FLASH_WRITE_BLOCK_SIZE=4
CONFIG_MCUBOOT_USB_SUPPORT=y
CONFIG_DFU_MULTI_IMAGE_PACKAGE_BUILD=y
CONFIG_DFU_MULTI_IMAGE_PACKAGE_APP=y
# CONFIG_ADD_MCUBOOT_MEDIATE_SIM_FLASH_DTS is not set
# end of MCUboot

CONFIG_ZEPHYR_MCUBOOT_MODULE=y
# end of mcuboot (D:/eurogatewaycode/external/bootloader/mcuboot)

#
# mbedtls (D:/eurogatewaycode/external/modules/crypto/mbedtls)
#
CONFIG_ZEPHYR_MBEDTLS_MODULE=y
CONFIG_MBEDTLS_BUILTIN=y
# CONFIG_MBEDTLS_LIBRARY is not set
# end of mbedtls (D:/eurogatewaycode/external/modules/crypto/mbedtls)

#
# trusted-firmware-m (D:/eurogatewaycode/external/modules/tee/tf-m/trusted-firmware-m)
#
CONFIG_BOOTLOADER_MCUBOOT=y
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE=y
# end of trusted-firmware-m (D:/eurogatewaycode/external/modules/tee/tf-m/trusted-firmware-m)

#
# cjson (D:/eurogatewaycode/external/modules/lib/cjson)
#
CONFIG_ZEPHYR_CJSON_MODULE=y
# end of cjson (D:/eurogatewaycode/external/modules/lib/cjson)

#
# azure-sdk-for-c (D:/eurogatewaycode/external/modules/lib/azure-sdk-for-c)
#
# CONFIG_AZURE_SDK is not set
CONFIG_ZEPHYR_AZURE_SDK_FOR_C_MODULE=y
# end of azure-sdk-for-c (D:/eurogatewaycode/external/modules/lib/azure-sdk-for-c)

#
# memfault-firmware-sdk (D:/eurogatewaycode/external/modules/lib/memfault-firmware-sdk)
#
# CONFIG_MEMFAULT is not set
CONFIG_ZEPHYR_MEMFAULT_FIRMWARE_SDK_MODULE=y
# end of memfault-firmware-sdk (D:/eurogatewaycode/external/modules/lib/memfault-firmware-sdk)

#
# cirrus-logic (D:/eurogatewaycode/external/modules/hal/cirrus-logic)
#
# CONFIG_HW_CODEC_CIRRUS_LOGIC is not set
CONFIG_ZEPHYR_CIRRUS_LOGIC_MODULE=y
# end of cirrus-logic (D:/eurogatewaycode/external/modules/hal/cirrus-logic)

#
# openthread (D:/eurogatewaycode/external/modules/lib/openthread)
#
# CONFIG_OPENTHREAD is not set
CONFIG_ZEPHYR_OPENTHREAD_MODULE=y
# end of openthread (D:/eurogatewaycode/external/modules/lib/openthread)

#
# canopennode (D:/eurogatewaycode/external/modules/lib/canopennode)
#
CONFIG_ZEPHYR_CANOPENNODE_MODULE=y
# end of canopennode (D:/eurogatewaycode/external/modules/lib/canopennode)

#
# chre (D:/eurogatewaycode/external/modules/lib/chre)
#
CONFIG_ZEPHYR_CHRE_MODULE=y
# CONFIG_CHRE is not set
# end of chre (D:/eurogatewaycode/external/modules/lib/chre)

#
# hal_nordic (D:/eurogatewaycode/external/modules/hal/nordic)
#
CONFIG_ZEPHYR_HAL_NORDIC_MODULE=y
CONFIG_HAS_NORDIC_DRIVERS=y

#
# Nordic drivers
#
# CONFIG_NRF_802154_SOURCE_HAL_NORDIC is not set
CONFIG_NRF_802154_RADIO_DRIVER=y
CONFIG_NRF_802154_MULTIPROTOCOL_SUPPORT=y
CONFIG_NRF_802154_CCA_MODE_ED=y
# CONFIG_NRF_802154_CCA_MODE_CARRIER is not set
# CONFIG_NRF_802154_CCA_MODE_CARRIER_AND_ED is not set
# CONFIG_NRF_802154_CCA_MODE_CARRIER_OR_ED is not set
# CONFIG_NRF_802154_SL_OPENSOURCE is not set
CONFIG_NRF_802154_CCA_ED_THRESHOLD=45
CONFIG_NRF_802154_CCA_CORR_THRESHOLD=45
CONFIG_NRF_802154_CCA_CORR_LIMIT=2
CONFIG_NRF_802154_PENDING_SHORT_ADDRESSES=16
CONFIG_NRF_802154_PENDING_EXTENDED_ADDRESSES=16
CONFIG_NRF_802154_RX_BUFFERS=16
CONFIG_NRF_802154_TEMPERATURE_UPDATE=y
CONFIG_NRF_802154_TEMPERATURE_UPDATE_INIT_PRIO=91
CONFIG_NRF_802154_TEMPERATURE_UPDATE_PERIOD=60000
# end of Nordic drivers

CONFIG_HAS_NRFX=y

#
# nrfx drivers
#
# CONFIG_NRFX_CLOCK is not set
# CONFIG_NRFX_COMP is not set
# CONFIG_NRFX_EGU0 is not set
# CONFIG_NRFX_EGU1 is not set
# CONFIG_NRFX_EGU2 is not set
# CONFIG_NRFX_EGU3 is not set
# CONFIG_NRFX_EGU4 is not set
# CONFIG_NRFX_EGU5 is not set
CONFIG_NRFX_GPIOTE=y
# CONFIG_NRFX_I2S is not set
CONFIG_NRFX_NFCT=y
CONFIG_NRFX_NVMC=y
# CONFIG_NRFX_PDM is not set
# CONFIG_NRFX_POWER is not set
CONFIG_NRFX_PPI=y
# CONFIG_NRFX_PWM0 is not set
# CONFIG_NRFX_PWM1 is not set
# CONFIG_NRFX_PWM2 is not set
# CONFIG_NRFX_PWM3 is not set
# CONFIG_NRFX_QDEC is not set
CONFIG_NRFX_QSPI=y
# CONFIG_NRFX_RNG is not set
# CONFIG_NRFX_RTC0 is not set
# CONFIG_NRFX_RTC1 is not set
# CONFIG_NRFX_RTC2 is not set
# CONFIG_NRFX_SAADC is not set
# CONFIG_NRFX_SPI0 is not set
# CONFIG_NRFX_SPI1 is not set
# CONFIG_NRFX_SPI2 is not set
# CONFIG_NRFX_SPIM3 is not set
# CONFIG_NRFX_SYSTICK is not set
# CONFIG_NRFX_TEMP is not set
CONFIG_NRFX_TIMER=y
# CONFIG_NRFX_TIMER0 is not set
# CONFIG_NRFX_TIMER1 is not set
# CONFIG_NRFX_TIMER2 is not set
# CONFIG_NRFX_TIMER3 is not set
CONFIG_NRFX_TIMER4=y
# CONFIG_NRFX_TWI0 is not set
# CONFIG_NRFX_TWI1 is not set
CONFIG_NRFX_UARTE=y
CONFIG_NRFX_UARTE0=y
# CONFIG_NRFX_UARTE1 is not set
# CONFIG_NRFX_USBD is not set
# CONFIG_NRFX_WDT0 is not set

#
# Peripheral Resource Sharing module
#
# CONFIG_NRFX_PRS_BOX_0 is not set
# CONFIG_NRFX_PRS_BOX_1 is not set
# CONFIG_NRFX_PRS_BOX_2 is not set
# CONFIG_NRFX_PRS_BOX_3 is not set
# CONFIG_NRFX_PRS_BOX_4 is not set
# end of Peripheral Resource Sharing module
# end of nrfx drivers
# end of hal_nordic (D:/eurogatewaycode/external/modules/hal/nordic)

#
# liblc3codec (D:/eurogatewaycode/external/modules/lib/liblc3codec)
#
# CONFIG_LIBLC3CODEC is not set
CONFIG_ZEPHYR_LIBLC3CODEC_MODULE=y
# end of liblc3codec (D:/eurogatewaycode/external/modules/lib/liblc3codec)

#
# littlefs (D:/eurogatewaycode/external/modules/fs/littlefs)
#
CONFIG_ZEPHYR_LITTLEFS_MODULE=y
# end of littlefs (D:/eurogatewaycode/external/modules/fs/littlefs)

#
# loramac-node (D:/eurogatewaycode/external/modules/lib/loramac-node)
#
CONFIG_ZEPHYR_LORAMAC_NODE_MODULE=y
# CONFIG_HAS_SEMTECH_RADIO_DRIVERS is not set
# end of loramac-node (D:/eurogatewaycode/external/modules/lib/loramac-node)

#
# lvgl (D:/eurogatewaycode/external/modules/lib/gui/lvgl)
#
CONFIG_ZEPHYR_LVGL_MODULE=y
# end of lvgl (D:/eurogatewaycode/external/modules/lib/gui/lvgl)

#
# lz4 (D:/eurogatewaycode/external/modules/lib/lz4)
#
CONFIG_ZEPHYR_LZ4_MODULE=y
# CONFIG_LZ4 is not set
# end of lz4 (D:/eurogatewaycode/external/modules/lib/lz4)

#
# nanopb (D:/eurogatewaycode/external/modules/lib/nanopb)
#
CONFIG_ZEPHYR_NANOPB_MODULE=y
# CONFIG_NANOPB is not set
# end of nanopb (D:/eurogatewaycode/external/modules/lib/nanopb)

#
# picolibc (D:/eurogatewaycode/external/modules/lib/picolibc)
#
# CONFIG_PICOLIBC_MODULE is not set
CONFIG_ZEPHYR_PICOLIBC_MODULE=y
# end of picolibc (D:/eurogatewaycode/external/modules/lib/picolibc)

#
# TraceRecorder (D:/eurogatewaycode/external/modules/debug/TraceRecorder)
#
CONFIG_ZEPHYR_TRACERECORDER_MODULE=y
# end of TraceRecorder (D:/eurogatewaycode/external/modules/debug/TraceRecorder)

#
# zcbor (D:/eurogatewaycode/external/modules/lib/zcbor)
#
CONFIG_ZEPHYR_ZCBOR_MODULE=y
CONFIG_ZCBOR=y
# CONFIG_ZCBOR_CANONICAL is not set
# CONFIG_ZCBOR_STOP_ON_ERROR is not set
# CONFIG_ZCBOR_VERBOSE is not set
CONFIG_ZCBOR_ASSERT=y
# end of zcbor (D:/eurogatewaycode/external/modules/lib/zcbor)

#
# zscilib (D:/eurogatewaycode/external/modules/lib/zscilib)
#
# CONFIG_ZSL is not set
CONFIG_ZEPHYR_ZSCILIB_MODULE=y
# end of zscilib (D:/eurogatewaycode/external/modules/lib/zscilib)

#
# nrfxlib (D:/eurogatewaycode/external/nrfxlib)
#

#
# Nordic nrfxlib
#
CONFIG_NRF_MODEM_SHMEM_CTRL_SIZE=0x4e8
# CONFIG_NFC_T2T_NRFXLIB is not set
CONFIG_NFC_T4T_NRFXLIB=y
CONFIG_MPSL=y
CONFIG_MPSL_BUILD_TYPE_LIB=y

#
# Crypto libraries for nRF5x SOCs.
#
CONFIG_NRFXLIB_CRYPTO=y
CONFIG_CRYPTOCELL_CC310_USABLE=y
CONFIG_CRYPTOCELL_USABLE=y
# CONFIG_NRF_OBERON is not set
# CONFIG_NRF_CC310_BL is not set
CONFIG_NRF_CC3XX_PLATFORM=y
# CONFIG_HW_CC3XX_INTERRUPT is not set
CONFIG_CC3XX_MUTEX_LOCK=y
# CONFIG_CC3XX_ATOMIC_LOCK is not set
# end of Crypto libraries for nRF5x SOCs.

#
# nrf_security module
#
# CONFIG_NORDIC_SECURITY_BACKEND is not set
# CONFIG_NRF_SECURITY is not set
# end of nrf_security module

# CONFIG_NRF_RPC is not set

#
# ZBOSS library configuration
#
CONFIG_ZIGBEE_LIBRARY_PRODUCTION=y
# CONFIG_ZIGBEE_LIBRARY_DEVELOPMENT is not set
CONFIG_ZIGBEE_LIBRARY_SOC=y
# CONFIG_ZIGBEE_LIBRARY_NCP_DEV is not set
# CONFIG_ZIGBEE_GP_NONE is not set
CONFIG_ZIGBEE_GP_PB=y
# CONFIG_ZIGBEE_ENABLE_TRACES is not set
CONFIG_APP_LINK_WITH_ZBOSS=y
# end of ZBOSS library configuration

CONFIG_NRF_802154_SOURCE_NRFXLIB=y
CONFIG_NRF_802154_SL=y
# CONFIG_GZLL is not set
# CONFIG_NRF_DM is not set
# CONFIG_SW_CODEC_LC3_T2_SOFTWARE is not set
# CONFIG_LC3_PLC_DISABLED is not set
CONFIG_LC3_ENC_CHAN_MAX=1
CONFIG_LC3_DEC_CHAN_MAX=1

#
# Encoder sample rates
#
CONFIG_LC3_ENC_SAMPLE_RATE_8KHZ_SUPPORT=y
CONFIG_LC3_ENC_SAMPLE_RATE_16KHZ_SUPPORT=y
CONFIG_LC3_ENC_SAMPLE_RATE_24KHZ_SUPPORT=y
CONFIG_LC3_ENC_SAMPLE_RATE_32KHZ_SUPPORT=y
CONFIG_LC3_ENC_SAMPLE_RATE_441KHZ_SUPPORT=y
CONFIG_LC3_ENC_SAMPLE_RATE_48KHZ_SUPPORT=y
# end of Encoder sample rates

#
# Decoder sample rates
#
CONFIG_LC3_DEC_SAMPLE_RATE_8KHZ_SUPPORT=y
CONFIG_LC3_DEC_SAMPLE_RATE_16KHZ_SUPPORT=y
CONFIG_LC3_DEC_SAMPLE_RATE_24KHZ_SUPPORT=y
CONFIG_LC3_DEC_SAMPLE_RATE_32KHZ_SUPPORT=y
CONFIG_LC3_DEC_SAMPLE_RATE_441KHZ_SUPPORT=y
CONFIG_LC3_DEC_SAMPLE_RATE_48KHZ_SUPPORT=y
# end of Decoder sample rates
# end of Nordic nrfxlib

CONFIG_ZEPHYR_NRFXLIB_MODULE=y
# end of nrfxlib (D:/eurogatewaycode/external/nrfxlib)

#
# connectedhomeip (D:/eurogatewaycode/external/modules/lib/matter)
#
CONFIG_ZEPHYR_CONNECTEDHOMEIP_MODULE=y
# end of connectedhomeip (D:/eurogatewaycode/external/modules/lib/matter)

#
# Optional modules. Make sure they're installed, via the project manifest.
#
CONFIG_HAS_CMSIS_CORE=y
CONFIG_HAS_CMSIS_CORE_M=y
# CONFIG_CMSIS_NN is not set
# CONFIG_LIBMETAL is not set
# CONFIG_LVGL is not set
# CONFIG_HAS_MEC_HAL is not set
# CONFIG_HAS_MPFS_HAL is not set
# CONFIG_OPENAMP is not set
# CONFIG_SOF is not set
# CONFIG_MIPI_SYST_LIB is not set
# CONFIG_HAS_TELINK_DRIVERS is not set
# CONFIG_TINYCBOR is not set
CONFIG_MCUBOOT_BOOTUTIL_LIB=y
CONFIG_MCUBOOT_BOOTUTIL_LIB_OWN_LOG=y
# CONFIG_BOOT_IMAGE_ACCESS_HOOKS is not set

#
# Unavailable modules, please install those via the project manifest.
#

#
# hal_gigadevice module not available.
#

#
# FFF module not available.
#
# end of Modules

CONFIG_BOARD_REVISION="$BOARD_REVISION"
# CONFIG_NET_DRIVERS is not set
CONFIG_BOARD_NRF52840DK_NRF52840=y

#
# Board Options
#
CONFIG_BOARD_ENABLE_DCDC=y
CONFIG_BOARD_ENABLE_DCDC_HV=y
# end of Board Options

# CONFIG_SOC_SERIES_BEETLE is not set
# CONFIG_SOC_SERIES_ARM_DESIGNSTART is not set
# CONFIG_SOC_SERIES_FVP_AEMV8R_AARCH32 is not set
# CONFIG_SOC_SERIES_MPS2 is not set
# CONFIG_SOC_SERIES_MPS3 is not set
# CONFIG_SOC_SERIES_MUSCA_B1 is not set
# CONFIG_SOC_SERIES_MUSCA_S1 is not set
# CONFIG_SOC_SERIES_AST10X0 is not set
# CONFIG_SOC_SERIES_SAMD20 is not set
# CONFIG_SOC_SERIES_SAMD21 is not set
# CONFIG_SOC_SERIES_SAMD51 is not set
# CONFIG_SOC_SERIES_SAME51 is not set
# CONFIG_SOC_SERIES_SAME53 is not set
# CONFIG_SOC_SERIES_SAME54 is not set
# CONFIG_SOC_SERIES_SAML21 is not set
# CONFIG_SOC_SERIES_SAMR21 is not set
# CONFIG_SOC_SERIES_SAMR34 is not set
# CONFIG_SOC_SERIES_SAMR35 is not set
# CONFIG_SOC_SERIES_SAM3X is not set
# CONFIG_SOC_SERIES_SAM4E is not set
# CONFIG_SOC_SERIES_SAM4L is not set
# CONFIG_SOC_SERIES_SAM4S is not set
# CONFIG_SOC_SERIES_SAME70 is not set
# CONFIG_SOC_SERIES_SAMV71 is not set
# CONFIG_SOC_SERIES_VALKYRIE is not set
# CONFIG_SOC_SERIES_VIPER is not set
# CONFIG_SOC_SERIES_PSOC62 is not set
# CONFIG_SOC_SERIES_PSOC63 is not set
# CONFIG_SOC_SERIES_GD32E10X is not set
# CONFIG_SOC_SERIES_GD32F3X0 is not set
# CONFIG_SOC_SERIES_GD32F403 is not set
# CONFIG_SOC_SERIES_GD32F4XX is not set
# CONFIG_SOC_SERIES_XMC_4XXX is not set
# CONFIG_SOC_SERIES_CYCLONE5 is not set
# CONFIG_SOC_SERIES_MEC1501X is not set
# CONFIG_SOC_SERIES_MEC1701X is not set
# CONFIG_SOC_SERIES_MEC172X is not set
# CONFIG_SOC_SERIES_NRF51X is not set
CONFIG_SOC_SERIES_NRF52X=y
# CONFIG_SOC_SERIES_NRF53X is not set
# CONFIG_SOC_SERIES_NRF91X is not set
# CONFIG_SOC_SERIES_NPCX7 is not set
# CONFIG_SOC_SERIES_NPCX9 is not set
# CONFIG_SOC_SERIES_M48X is not set
# CONFIG_SOC_SERIES_IMX_6X_M4 is not set
# CONFIG_SOC_SERIES_IMX7_M4 is not set
# CONFIG_SOC_SERIES_IMX8ML_M7 is not set
# CONFIG_SOC_SERIES_IMX8MM_M4 is not set
# CONFIG_SOC_SERIES_IMX8MQ_M4 is not set
# CONFIG_SOC_SERIES_IMX_RT5XX is not set
# CONFIG_SOC_SERIES_IMX_RT6XX is not set
# CONFIG_SOC_SERIES_IMX_RT is not set
# CONFIG_SOC_SERIES_KINETIS_K2X is not set
# CONFIG_SOC_SERIES_KINETIS_K6X is not set
# CONFIG_SOC_SERIES_KINETIS_K8X is not set
# CONFIG_SOC_SERIES_KINETIS_KE1XF is not set
# CONFIG_SOC_SERIES_KINETIS_KL2X is not set
# CONFIG_SOC_SERIES_KINETIS_KV5X is not set
# CONFIG_SOC_SERIES_KINETIS_KWX is not set
# CONFIG_SOC_SERIES_LPC11U6X is not set
# CONFIG_SOC_SERIES_LPC54XXX is not set
# CONFIG_SOC_SERIES_LPC55XXX is not set
# CONFIG_SOC_EOS_S3 is not set
# CONFIG_SOC_SERIES_RCAR_GEN3 is not set
# CONFIG_SOC_SERIES_RP2XXX is not set
# CONFIG_SOC_SERIES_EFM32GG11B is not set
# CONFIG_SOC_SERIES_EFM32HG is not set
# CONFIG_SOC_SERIES_EFM32JG12B is not set
# CONFIG_SOC_SERIES_EFM32PG12B is not set
# CONFIG_SOC_SERIES_EFM32PG1B is not set
# CONFIG_SOC_SERIES_EFM32WG is not set
# CONFIG_SOC_SERIES_EFR32BG13P is not set
# CONFIG_SOC_SERIES_EFR32FG13P is not set
# CONFIG_SOC_SERIES_EFR32FG1P is not set
# CONFIG_SOC_SERIES_EFR32MG12P is not set
# CONFIG_SOC_SERIES_EFR32MG21 is not set
# CONFIG_SOC_SERIES_STM32F0X is not set
# CONFIG_SOC_SERIES_STM32F1X is not set
# CONFIG_SOC_SERIES_STM32F2X is not set
# CONFIG_SOC_SERIES_STM32F3X is not set
# CONFIG_SOC_SERIES_STM32F4X is not set
# CONFIG_SOC_SERIES_STM32F7X is not set
# CONFIG_SOC_SERIES_STM32G0X is not set
# CONFIG_SOC_SERIES_STM32G4X is not set
# CONFIG_SOC_SERIES_STM32H7X is not set
# CONFIG_SOC_SERIES_STM32L0X is not set
# CONFIG_SOC_SERIES_STM32L1X is not set
# CONFIG_SOC_SERIES_STM32L4X is not set
# CONFIG_SOC_SERIES_STM32L5X is not set
# CONFIG_SOC_SERIES_STM32MP1X is not set
# CONFIG_SOC_SERIES_STM32U5X is not set
# CONFIG_SOC_SERIES_STM32WBX is not set
# CONFIG_SOC_SERIES_STM32WLX is not set
# CONFIG_SOC_TI_LM3S6965 is not set
# CONFIG_SOC_SERIES_CC13X2_CC26X2 is not set
# CONFIG_SOC_SERIES_CC32XX is not set
# CONFIG_SOC_SERIES_MSP432P4XX is not set
# CONFIG_SOC_SERIES_XILINX_XC7ZXXX is not set
# CONFIG_SOC_SERIES_XILINX_XC7ZXXXS is not set
# CONFIG_SOC_XILINX_ZYNQMP_RPU is not set

#
# Hardware Configuration
#
CONFIG_CPU_HAS_ARM_MPU=y
CONFIG_HAS_SWO=y
CONFIG_SOC_FAMILY="nordic_nrf"
CONFIG_SOC_FAMILY_NRF=y
CONFIG_HAS_HW_NRF_ACL=y
CONFIG_HAS_HW_NRF_CC310=y
CONFIG_HAS_HW_NRF_CCM=y
CONFIG_HAS_HW_NRF_CCM_LFLEN_8BIT=y
CONFIG_HAS_HW_NRF_CLOCK=y
CONFIG_HAS_HW_NRF_ECB=y
CONFIG_HAS_HW_NRF_EGU0=y
CONFIG_HAS_HW_NRF_EGU1=y
CONFIG_HAS_HW_NRF_EGU2=y
CONFIG_HAS_HW_NRF_EGU3=y
CONFIG_HAS_HW_NRF_EGU4=y
CONFIG_HAS_HW_NRF_EGU5=y
CONFIG_HAS_HW_NRF_GPIO0=y
CONFIG_HAS_HW_NRF_GPIO1=y
CONFIG_HAS_HW_NRF_GPIOTE=y
CONFIG_HAS_HW_NRF_NVMC_PE=y
CONFIG_HAS_HW_NRF_POWER=y
CONFIG_HAS_HW_NRF_PPI=y
CONFIG_HAS_HW_NRF_PWM0=y
CONFIG_HAS_HW_NRF_QSPI=y
CONFIG_HAS_HW_NRF_RADIO_BLE_2M=y
CONFIG_HAS_HW_NRF_RADIO_BLE_CODED=y
CONFIG_HAS_HW_NRF_RADIO_IEEE802154=y
CONFIG_HAS_HW_NRF_RADIO_TX_PWR_HIGH=y
CONFIG_HAS_HW_NRF_RNG=y
CONFIG_HAS_HW_NRF_RTC0=y
CONFIG_HAS_HW_NRF_RTC1=y
CONFIG_HAS_HW_NRF_RTC2=y
CONFIG_HAS_HW_NRF_SAADC=y
CONFIG_HAS_HW_NRF_SPI1=y
CONFIG_HAS_HW_NRF_SPIM3=y
CONFIG_HAS_HW_NRF_SWI0=y
CONFIG_HAS_HW_NRF_SWI1=y
CONFIG_HAS_HW_NRF_SWI2=y
CONFIG_HAS_HW_NRF_SWI3=y
CONFIG_HAS_HW_NRF_SWI4=y
CONFIG_HAS_HW_NRF_SWI5=y
CONFIG_HAS_HW_NRF_TEMP=y
CONFIG_HAS_HW_NRF_TIMER0=y
CONFIG_HAS_HW_NRF_TIMER1=y
CONFIG_HAS_HW_NRF_TIMER2=y
CONFIG_HAS_HW_NRF_TIMER3=y
CONFIG_HAS_HW_NRF_TIMER4=y
CONFIG_HAS_HW_NRF_TWI0=y
CONFIG_HAS_HW_NRF_UARTE0=y
CONFIG_HAS_HW_NRF_UARTE1=y
CONFIG_HAS_HW_NRF_USBD=y
CONFIG_HAS_HW_NRF_WDT0=y
CONFIG_NRF_HW_TIMER1_RESERVED=y
CONFIG_NRF_HW_RTC1_RESERVED=y
CONFIG_SOC_NRF52840=y
# CONFIG_SOC_NRF52805_CAAA is not set
# CONFIG_SOC_NRF52810_QFAA is not set
# CONFIG_SOC_NRF52811_QFAA is not set
# CONFIG_SOC_NRF52820_QDAA is not set
# CONFIG_SOC_NRF52832_CIAA is not set
# CONFIG_SOC_NRF52832_QFAA is not set
# CONFIG_SOC_NRF52832_QFAB is not set
# CONFIG_SOC_NRF52833_QIAA is not set
CONFIG_SOC_NRF52840_QIAA=y
CONFIG_SOC_DCDC_NRF52X=y
CONFIG_SOC_DCDC_NRF52X_HV=y
# CONFIG_GPIO_AS_PINRESET is not set
CONFIG_NRF_ENABLE_ICACHE=y
CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT=3
CONFIG_NRF_SOC_SECURE_SUPPORTED=y
# CONFIG_NFCT_PINS_AS_GPIOS is not set
CONFIG_NRF_APPROTECT_USE_UICR=y
# CONFIG_NRF_APPROTECT_LOCK is not set
# CONFIG_NRF_TRACE_PORT is not set
# end of Hardware Configuration

CONFIG_SOC_COMPATIBLE_NRF=y
CONFIG_SOC_COMPATIBLE_NRF52X=y

#
# ARM Options
#
CONFIG_ARCH="arm"
CONFIG_CPU_CORTEX=y
# CONFIG_CODE_DATA_RELOCATION_SRAM is not set
CONFIG_CPU_CORTEX_M=y
CONFIG_ISA_THUMB2=y
CONFIG_ASSEMBLER_ISA_THUMB2=y
CONFIG_COMPILER_ISA_THUMB2=y
CONFIG_STACK_ALIGN_DOUBLE_WORD=y
# CONFIG_RUNTIME_NMI is not set
CONFIG_FAULT_DUMP=2
CONFIG_ARM_STACK_PROTECTION=y
CONFIG_ARM_STORE_EXC_RETURN=y
CONFIG_FP_HARDABI=y
# CONFIG_FP_SOFTABI is not set
CONFIG_FP16=y
CONFIG_FP16_IEEE=y
# CONFIG_FP16_ALT is not set
CONFIG_CPU_CORTEX_M4=y
CONFIG_CPU_CORTEX_M_HAS_SYSTICK=y
CONFIG_CPU_CORTEX_M_HAS_DWT=y
CONFIG_CPU_CORTEX_M_HAS_BASEPRI=y
CONFIG_CPU_CORTEX_M_HAS_VTOR=y
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS=y
CONFIG_ARMV7_M_ARMV8_M_MAINLINE=y
CONFIG_ARMV7_M_ARMV8_M_FP=y

#
# ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33 options
#
CONFIG_GEN_ISR_TABLES=y
CONFIG_ZERO_LATENCY_IRQS=y
CONFIG_ZERO_LATENCY_LEVELS=1
# CONFIG_DYNAMIC_DIRECT_INTERRUPTS is not set
# CONFIG_SW_VECTOR_RELAY is not set
# CONFIG_CORTEX_M_DWT is not set
# CONFIG_TRAP_UNALIGNED_ACCESS is not set
# end of ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33 options

CONFIG_NULL_POINTER_EXCEPTION_DETECTION_NONE=y
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT is not set
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU is not set
CONFIG_GEN_IRQ_VECTOR_TABLE=y
CONFIG_ARM_MPU=y
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=32
CONFIG_MPU_STACK_GUARD=y
CONFIG_MPU_STACK_GUARD_MIN_SIZE_FLOAT=128
CONFIG_MPU_ALLOW_FLASH_WRITE=y
# CONFIG_CUSTOM_SECTION_ALIGN is not set
CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE=32
# end of ARM Options

CONFIG_ARM=y
CONFIG_ARCH_IS_SET=y

#
# General Architecture Options
#
# CONFIG_SEMIHOST is not set
CONFIG_HW_STACK_PROTECTION=y
# CONFIG_USERSPACE is not set
CONFIG_KOBJECT_TEXT_AREA=256
CONFIG_KOBJECT_DATA_AREA_RESERVE_EXTRA_PERCENT=100
CONFIG_KOBJECT_RODATA_AREA_EXTRA_BYTES=16
CONFIG_GEN_PRIV_STACKS=y
# CONFIG_STACK_GROWS_UP is not set

#
# Interrupt Configuration
#
CONFIG_DYNAMIC_INTERRUPTS=y
CONFIG_ARCH_IRQ_VECTOR_TABLE_ALIGN=4
CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS=y
# CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_CODE is not set
CONFIG_GEN_SW_ISR_TABLE=y
CONFIG_ARCH_SW_ISR_TABLE_ALIGN=4
CONFIG_GEN_IRQ_START_VECTOR=0
# CONFIG_EXTRA_EXCEPTION_INFO is not set
# end of Interrupt Configuration
# end of General Architecture Options

CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT=y
CONFIG_ARCH_HAS_TIMING_FUNCTIONS=y
CONFIG_ARCH_HAS_STACK_PROTECTION=y
CONFIG_ARCH_HAS_USERSPACE=y
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT=y
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT=y
CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION=y
CONFIG_ARCH_SUPPORTS_COREDUMP=y
CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT=y
CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO=y
CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE=y
CONFIG_ARCH_HAS_SUSPEND_TO_RAM=y
CONFIG_ARCH_HAS_THREAD_ABORT=y
CONFIG_CPU_HAS_FPU=y
CONFIG_CPU_HAS_MPU=y
CONFIG_MPU=y
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT=y
CONFIG_SRAM_REGION_PERMISSIONS=y

#
# Floating Point Options
#
CONFIG_FPU_SHARING=y
# end of Floating Point Options

#
# Cache Options
#
CONFIG_DCACHE=y
# CONFIG_CACHE_MANAGEMENT is not set
# end of Cache Options

CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS=y

#
# General Kernel Options
#
CONFIG_MULTITHREADING=y
CONFIG_NUM_COOP_PRIORITIES=16
CONFIG_NUM_PREEMPT_PRIORITIES=15
CONFIG_MAIN_THREAD_PRIORITY=7
CONFIG_COOP_ENABLED=y
CONFIG_PREEMPT_ENABLED=y
CONFIG_PRIORITY_CEILING=-127
# CONFIG_SCHED_DEADLINE is not set
# CONFIG_SCHED_CPU_MASK is not set
CONFIG_IDLE_STACK_SIZE=320
CONFIG_ISR_STACK_SIZE=2048
CONFIG_THREAD_STACK_INFO=y
# CONFIG_THREAD_CUSTOM_DATA is not set
CONFIG_ERRNO=y
CONFIG_SCHED_DUMB=y
# CONFIG_SCHED_SCALABLE is not set
# CONFIG_SCHED_MULTIQ is not set
# CONFIG_WAITQ_SCALABLE is not set
CONFIG_WAITQ_DUMB=y

#
# Kernel Debugging and Metrics
#
CONFIG_BOOT_BANNER=y
CONFIG_BOOT_DELAY=0
# CONFIG_THREAD_MONITOR is not set
# CONFIG_THREAD_NAME is not set
# CONFIG_THREAD_RUNTIME_STATS is not set
# end of Kernel Debugging and Metrics

#
# Work Queue Options
#
CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-1
# CONFIG_SYSTEM_WORKQUEUE_NO_YIELD is not set
# end of Work Queue Options

#
# Atomic Operations
#
CONFIG_ATOMIC_OPERATIONS_BUILTIN=y
# end of Atomic Operations

#
# Timer API Options
#
CONFIG_TIMESLICING=y
CONFIG_TIMESLICE_SIZE=0
CONFIG_TIMESLICE_PRIORITY=0
# CONFIG_TIMESLICE_PER_THREAD is not set
CONFIG_POLL=y
# end of Timer API Options

#
# Other Kernel Object Options
#
# CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION is not set
CONFIG_NUM_MBOX_ASYNC_MSGS=10
# CONFIG_EVENTS is not set
CONFIG_KERNEL_MEM_POOL=y
# end of Other Kernel Object Options

CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN=y
CONFIG_SWAP_NONATOMIC=y
CONFIG_SYS_CLOCK_EXISTS=y
CONFIG_TIMEOUT_64BIT=y
CONFIG_SYS_CLOCK_MAX_TIMEOUT_DAYS=365
CONFIG_XIP=y

#
# Initialization Priorities
#
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50
CONFIG_APPLICATION_INIT_PRIORITY=90
# end of Initialization Priorities

#
# Security Options
#
# CONFIG_STACK_CANARIES is not set
CONFIG_STACK_POINTER_RANDOM=0
# end of Security Options

#
# SMP Options
#
# end of SMP Options

CONFIG_TICKLESS_KERNEL=y
CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE=y
# CONFIG_THREAD_LOCAL_STORAGE is not set
# end of General Kernel Options

#
# Device Options
#
# end of Device Options

#
# Virtual Memory Support
#
# end of Virtual Memory Support

CONFIG_HAS_DTS=y

#
# Devicetree Info
#
CONFIG_DT_HAS_ARDUINO_UNO_ADC_ENABLED=y
CONFIG_DT_HAS_ARDUINO_HEADER_R3_ENABLED=y
CONFIG_DT_HAS_ARM_ARMV7M_ITM_ENABLED=y
CONFIG_DT_HAS_ARM_CORTEX_M4F_ENABLED=y
CONFIG_DT_HAS_ARM_CRYPTOCELL_310_ENABLED=y
CONFIG_DT_HAS_ARM_V7M_NVIC_ENABLED=y
CONFIG_DT_HAS_FIXED_PARTITIONS_ENABLED=y
CONFIG_DT_HAS_GPIO_KEYS_ENABLED=y
CONFIG_DT_HAS_GPIO_LEDS_ENABLED=y
CONFIG_DT_HAS_MMIO_SRAM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_ACL_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CC310_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CCM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CLOCK_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_ECB_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_EGU_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_FICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIOTE_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_MWU_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PINCTRL_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_POWER_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PPI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PWM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_QSPI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_RADIO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_RNG_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_RTC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SAADC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SPI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SPIM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SWI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_TEMP_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_TIMER_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_TWI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_UARTE_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_UICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_USBD_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_WDT_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF52_FLASH_CONTROLLER_ENABLED=y
CONFIG_DT_HAS_NORDIC_QSPI_NOR_ENABLED=y
CONFIG_DT_HAS_PWM_LEDS_ENABLED=y
CONFIG_DT_HAS_SOC_NV_FLASH_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_BT_HCI_ENTROPY_ENABLED=y
# end of Devicetree Info

#
# Device Drivers
#
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NET_IF_NO_AUTO_START is not set
# CONFIG_IEEE802154_RAW_MODE is not set
# CONFIG_IEEE802154_VENDOR_OUI_ENABLE is not set
# CONFIG_IEEE802154_TELINK_B91 is not set
# CONFIG_IEEE802154_CC2520 is not set
CONFIG_IEEE802154_NRF5_DRV_NAME="IEEE802154_nrf5"
CONFIG_IEEE802154_NRF5_RX_STACK_SIZE=800
CONFIG_IEEE802154_NRF5_INIT_PRIO=80
CONFIG_IEEE802154_NRF5_EXT_IRQ_MGMT=y
# CONFIG_IEEE802154_NRF5_UICR_EUI64_ENABLE is not set
CONFIG_IEEE802154_NRF5_FCS_IN_LENGTH=y
CONFIG_IEEE802154_NRF5_DELAY_TRX_ACC=50
# CONFIG_IEEE802154_NRF5_LOG_RX_FAILURES is not set
# CONFIG_IEEE802154_CC1200 is not set
# CONFIG_IEEE802154_SELECTIVE_TXPOWER is not set
# CONFIG_LORA is not set
CONFIG_CONSOLE=y
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN=128
CONFIG_CONSOLE_HAS_DRIVER=y
# CONFIG_CONSOLE_HANDLER is not set
CONFIG_CONSOLE_INIT_PRIORITY=60
CONFIG_UART_CONSOLE=y
# CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS is not set
# CONFIG_UART_CONSOLE_MCUMGR is not set
CONFIG_UART_CONSOLE_INPUT_EXPIRED=y
CONFIG_UART_CONSOLE_INPUT_EXPIRED_TIMEOUT=15000
# CONFIG_RAM_CONSOLE is not set
# CONFIG_RTT_CONSOLE is not set
# CONFIG_IPM_CONSOLE_SENDER is not set
# CONFIG_IPM_CONSOLE_RECEIVER is not set
# CONFIG_UART_MCUMGR is not set
# CONFIG_GSM_MUX is not set
# CONFIG_EFI_CONSOLE is not set
CONFIG_HAS_SEGGER_RTT=y
CONFIG_USE_SEGGER_RTT=y
# CONFIG_SEGGER_RTT_CUSTOM_LOCKING is not set
CONFIG_SEGGER_RTT_MAX_NUM_UP_BUFFERS=3
CONFIG_SEGGER_RTT_MAX_NUM_DOWN_BUFFERS=3
CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=1024
CONFIG_SEGGER_RTT_BUFFER_SIZE_DOWN=16
CONFIG_SEGGER_RTT_PRINTF_BUFFER_SIZE=64
CONFIG_SEGGER_RTT_MODE_NO_BLOCK_SKIP=y
# CONFIG_SEGGER_RTT_MODE_NO_BLOCK_TRIM is not set
# CONFIG_SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL is not set
CONFIG_SEGGER_RTT_MODE=0
# CONFIG_SEGGER_RTT_MEMCPY_USE_BYTELOOP is not set
CONFIG_SEGGER_RTT_SECTION_NONE=y
# CONFIG_SEGGER_RTT_SECTION_DTCM is not set
# CONFIG_EC_HOST_CMD_PERIPH is not set
# CONFIG_MDIO is not set

#
# Capabilities
#
CONFIG_SERIAL_HAS_DRIVER=y
CONFIG_SERIAL_SUPPORT_ASYNC=y
CONFIG_SERIAL_SUPPORT_INTERRUPT=y
CONFIG_UART_USE_RUNTIME_CONFIGURE=y
CONFIG_UART_ASYNC_API=y
# CONFIG_UART_LINE_CTRL is not set
# CONFIG_UART_DRV_CMD is not set
# CONFIG_UART_WIDE_DATA is not set
# CONFIG_UART_PIPE is not set

#
# Serial Drivers
#
CONFIG_UART_NRFX=y
CONFIG_UART_ASYNC_TX_CACHE_SIZE=8
CONFIG_UART_0_NRF_UARTE=y
CONFIG_UART_0_ENHANCED_POLL_OUT=y
CONFIG_UART_0_ASYNC=y
# CONFIG_UART_0_NRF_PARITY_BIT is not set
CONFIG_UART_0_NRF_TX_BUFFER_SIZE=32
# CONFIG_UART_0_NRF_HW_ASYNC is not set
# CONFIG_UART_0_NRF_ASYNC_LOW_POWER is not set
CONFIG_UART_1_NRF_UARTE=y
CONFIG_UART_1_ASYNC=y
CONFIG_UART_1_ENHANCED_POLL_OUT=y
# CONFIG_UART_1_NRF_PARITY_BIT is not set
# CONFIG_UART_1_NRF_HW_ASYNC is not set
# CONFIG_UART_1_NRF_ASYNC_LOW_POWER is not set
CONFIG_UART_ENHANCED_POLL_OUT=y
CONFIG_NRF_UARTE_PERIPHERAL=y

#
# Interrupt Controllers
#
# CONFIG_SWERV_PIC is not set
CONFIG_INTC_INIT_PRIORITY=40
# CONFIG_MULTI_LEVEL_INTERRUPTS is not set
# CONFIG_INTC_ESP32 is not set
# end of Interrupt Controllers

#
# Timer Drivers
#
# CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set
# CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
CONFIG_TICKLESS_CAPABLE=y
# CONFIG_INTEL_ADSP_TIMER is not set
# CONFIG_HPET_TIMER is not set
CONFIG_NRF_RTC_TIMER_LOCK_ZERO_LATENCY_IRQS=y
# CONFIG_SYSTEM_CLOCK_NO_WAIT is not set
# CONFIG_SYSTEM_CLOCK_WAIT_FOR_AVAILABILITY is not set
CONFIG_SYSTEM_CLOCK_WAIT_FOR_STABILITY=y
CONFIG_RISCV_MACHINE_TIMER_SYSTEM_CLOCK_DIVIDER=0
CONFIG_RISCV_MACHINE_TIMER_MIN_DELAY=100
# end of Timer Drivers

CONFIG_ENTROPY_INIT_PRIORITY=50
CONFIG_ENTROPY_NRF5_RNG=y
# CONFIG_ENTROPY_NRF5_BIAS_CORRECTION is not set
CONFIG_ENTROPY_NRF5_THR_POOL_SIZE=8
CONFIG_ENTROPY_NRF5_THR_THRESHOLD=4
CONFIG_ENTROPY_NRF5_ISR_POOL_SIZE=16
CONFIG_ENTROPY_NRF5_ISR_THRESHOLD=12
CONFIG_ENTROPY_HAS_DRIVER=y
# CONFIG_PCIE is not set
# CONFIG_PCIE_ENDPOINT is not set
# CONFIG_GPIO_GET_DIRECTION is not set
# CONFIG_GPIO_GET_CONFIG is not set
CONFIG_GPIO_NRFX=y
# CONFIG_SHARED_IRQ is not set
# CONFIG_SDHC is not set
# CONFIG_I2S is not set
# CONFIG_DAI is not set
# CONFIG_PWM is not set
# CONFIG_PINMUX is not set
# CONFIG_ADC is not set
# CONFIG_DAC is not set
# CONFIG_W1 is not set
CONFIG_CLOCK_CONTROL_NRF_FORCE_ALT=y
CONFIG_CLOCK_CONTROL_NRF=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_LOW_SWING is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_FULL_SWING is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM is not set
CONFIG_CLOCK_CONTROL_NRF_ACCURACY=50
# CONFIG_PTP_CLOCK is not set
# CONFIG_IPM is not set
CONFIG_FLASH_HAS_DRIVER_ENABLED=y
CONFIG_FLASH_HAS_PAGE_LAYOUT=y
CONFIG_FLASH_JESD216=y
# CONFIG_FLASH_JESD216_API is not set
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_INIT_PRIORITY=50
CONFIG_SOC_FLASH_NRF=y
# CONFIG_SOC_FLASH_NRF_RADIO_SYNC_NONE is not set
# CONFIG_SOC_FLASH_NRF_PARTIAL_ERASE is not set
# CONFIG_SOC_FLASH_NRF_UICR is not set
# CONFIG_SOC_FLASH_NRF_EMULATE_ONE_BYTE_WRITE_ACCESS is not set
CONFIG_NORDIC_QSPI_NOR_INIT_PRIORITY=80
CONFIG_NORDIC_QSPI_NOR_STACK_WRITE_BUFFER_SIZE=4
CONFIG_SENSOR_INIT_PRIORITY=90

#
# Device Drivers
#
CONFIG_TEMP_NRF5_FORCE_ALT=y
CONFIG_TEMP_NRF5=y
CONFIG_TMP112_FULL_SCALE_RUNTIME=y
CONFIG_TMP112_SAMPLING_FREQUENCY_RUNTIME=y
CONFIG_COUNTER=y
CONFIG_COUNTER_INIT_PRIORITY=50
CONFIG_COUNTER_NRF_TIMER=y
# CONFIG_COUNTER_TIMER0 is not set
CONFIG_COUNTER_TIMER2=y
# CONFIG_COUNTER_TIMER2_ZLI is not set
# CONFIG_COUNTER_TIMER3 is not set
# CONFIG_COUNTER_TIMER4 is not set
# CONFIG_COUNTER_RTC0 is not set
# CONFIG_COUNTER_RTC2 is not set
# CONFIG_DMA is not set
# CONFIG_USB_DEVICE_DRIVER is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_INIT_PRIORITY=80
# CONFIG_CRYPTO_TINYCRYPT_SHIM is not set
# CONFIG_CRYPTO_MBEDTLS_SHIM is not set
CONFIG_CRYPTO_NRF_ECB=y
# CONFIG_CRYPTO_INTEL_SHA is not set
# CONFIG_DISPLAY is not set
# CONFIG_LED_STRIP is not set
# CONFIG_LED is not set
# CONFIG_CAN is not set
# CONFIG_AUDIO is not set
# CONFIG_NEURAL_NET_ACCEL is not set
# CONFIG_HWINFO is not set
# CONFIG_ESPI is not set
# CONFIG_PS2 is not set
# CONFIG_VIDEO is not set
# CONFIG_EEPROM is not set
# CONFIG_PECI is not set
# CONFIG_PECI_INTERRUPT_DRIVEN is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEMC is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_EDAC is not set
# CONFIG_PM_CPU_OPS is not set

#
# Miscellaneous Drivers
#
# CONFIG_GROVE_LCD_RGB is not set
# end of Miscellaneous Drivers

# CONFIG_DISK_DRIVERS is not set
# CONFIG_CACHE is not set
# CONFIG_SYSCON is not set
# CONFIG_BBRAM is not set
# CONFIG_FPGA is not set
CONFIG_PINCTRL_STORE_REG=y
# CONFIG_PINCTRL_DYNAMIC is not set
CONFIG_PINCTRL_NRF=y
CONFIG_PINCTRL_STM32_REMAP_INIT_PRIORITY=2
# CONFIG_MBOX is not set
# CONFIG_MM_DRV is not set
# CONFIG_POWER_DOMAIN is not set
# CONFIG_USBC_TCPC_DRIVER is not set
# CONFIG_RESET is not set
# CONFIG_MIPI_DSI is not set
# CONFIG_COREDUMP_DEVICE is not set
# end of Device Drivers

#
# C Library
#
CONFIG_SUPPORT_MINIMAL_LIBC=y
CONFIG_PICOLIBC_SUPPORTED=y
CONFIG_MINIMAL_LIBC=y
# CONFIG_PICOLIBC is not set
# CONFIG_NEWLIB_LIBC is not set
# CONFIG_EXTERNAL_LIBC is not set
CONFIG_HAS_NEWLIB_LIBC_NANO=y
CONFIG_MINIMAL_LIBC_NON_REENTRANT_FUNCTIONS=y
CONFIG_MINIMAL_LIBC_MALLOC=y
CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE=0
CONFIG_MINIMAL_LIBC_CALLOC=y
CONFIG_MINIMAL_LIBC_REALLOCARRAY=y
# CONFIG_MINIMAL_LIBC_LL_PRINTF is not set
CONFIG_MINIMAL_LIBC_OPTIMIZE_STRING_FOR_SIZE=y
# CONFIG_MINIMAL_LIBC_RAND is not set
CONFIG_MINIMAL_LIBC_TIME=y
# CONFIG_MINIMAL_LIBC_STRING_ERROR_TABLE is not set
CONFIG_STDOUT_CONSOLE=y
CONFIG_NEED_LIBC_MEM_PARTITION=y
# end of C Library

#
# Additional libraries
#

#
# OS Support Library
#
# CONFIG_JSON_LIBRARY is not set
CONFIG_RING_BUFFER=y
# CONFIG_BASE64 is not set
# CONFIG_PRINTK_SYNC is not set
# CONFIG_MPSC_PBUF is not set
# CONFIG_SPSC_PBUF is not set
# CONFIG_SHARED_MULTI_HEAP is not set
# CONFIG_WINSTREAM is not set
CONFIG_REBOOT=y
# CONFIG_UTF8 is not set
CONFIG_CBPRINTF_COMPLETE=y
# CONFIG_CBPRINTF_NANO is not set
CONFIG_CBPRINTF_FULL_INTEGRAL=y
# CONFIG_CBPRINTF_REDUCED_INTEGRAL is not set
CONFIG_CBPRINTF_FP_SUPPORT=y
# CONFIG_CBPRINTF_FP_A_SUPPORT is not set
# CONFIG_CBPRINTF_FP_ALWAYS_A is not set
CONFIG_CBPRINTF_N_SPECIFIER=y
# CONFIG_CBPRINTF_LIBC_SUBSTS is not set
# CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE is not set
# CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT is not set

#
# Heap and Memory Allocation
#
# CONFIG_SYS_HEAP_VALIDATE is not set
CONFIG_SYS_HEAP_ALLOC_LOOPS=3
# CONFIG_SYS_HEAP_RUNTIME_STATS is not set
# CONFIG_SYS_HEAP_LISTENER is not set
CONFIG_SYS_HEAP_SMALL_ONLY=y
# CONFIG_SYS_HEAP_BIG_ONLY is not set
# CONFIG_SYS_HEAP_AUTO is not set
# CONFIG_SYS_MEM_BLOCKS is not set
# end of Heap and Memory Allocation
# end of OS Support Library

# CONFIG_GETOPT is not set
CONFIG_POSIX_MAX_FDS=4
# CONFIG_POSIX_API is not set
# CONFIG_POSIX_CLOCK is not set
CONFIG_MAX_TIMER_COUNT=5
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_EVENTFD is not set
# CONFIG_OPENAMP_RSC_TABLE is not set

#
# Util libraries
#
# CONFIG_FNMATCH is not set
# end of Util libraries

# CONFIG_SMF is not set
# end of Additional libraries

#
# Sub Systems and OS Services
#
# CONFIG_BT is not set

#
# Controller Area Network (CAN) bus subsystem
#
# CONFIG_ISOTP is not set
# end of Controller Area Network (CAN) bus subsystem

# CONFIG_CONSOLE_SUBSYS is not set
# CONFIG_CPLUSPLUS is not set

#
# System Monitoring Options
#
# CONFIG_THREAD_ANALYZER is not set
# end of System Monitoring Options

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_STACK_USAGE is not set
# CONFIG_STACK_SENTINEL is not set
CONFIG_PRINTK=y
CONFIG_EARLY_CONSOLE=y
CONFIG_ASSERT=y
CONFIG_ASSERT_LEVEL=2
CONFIG_SPIN_VALIDATE=y
# CONFIG_FORCE_NO_ASSERT is not set
CONFIG_ASSERT_VERBOSE=y
# CONFIG_ASSERT_NO_FILE_INFO is not set
CONFIG_ASSERT_NO_COND_INFO=y
CONFIG_ASSERT_NO_MSG_INFO=y
# CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_THREAD_INFO is not set
# CONFIG_DEBUG_COREDUMP is not set
# end of Debugging Options

# CONFIG_DISK_ACCESS is not set
# CONFIG_EMUL is not set
# CONFIG_CHARACTER_FRAMEBUFFER is not set

#
# File Systems
#
# CONFIG_FILE_SYSTEM is not set
# CONFIG_FCB is not set
CONFIG_NVS=y
# CONFIG_NVS_LOOKUP_CACHE is not set
# end of File Systems

#
# Inter Processor Communication
#
# CONFIG_RPMSG_SERVICE is not set
# CONFIG_IPC_SERVICE is not set
# end of Inter Processor Communication

# CONFIG_JWT is not set
# CONFIG_LOG is not set

#
# Device Management
#

#
# Host command handler subsystem
#
# CONFIG_EC_HOST_CMD is not set
# end of Host command handler subsystem

CONFIG_MCUMGR=y
CONFIG_APP_LINK_WITH_MCUMGR=y
# CONFIG_MGMT_VERBOSE_ERR_RESPONSE is not set
CONFIG_MGMT_MAX_MAIN_MAP_ENTRIES=15
CONFIG_MGMT_MIN_DECODING_LEVELS=0
CONFIG_MGMT_MAX_DECODING_LEVELS=0

#
# Command Handlers
#
# CONFIG_MCUMGR_CMD_IMG_MGMT is not set
# CONFIG_MCUMGR_CMD_OS_MGMT is not set
# CONFIG_MCUMGR_GRP_ZEPHYR_BASIC is not set
# end of Command Handlers

#
# Transports and Transport Related Configuration Options
#
CONFIG_MCUMGR_BUF_COUNT=4
CONFIG_MCUMGR_BUF_USER_DATA_SIZE=4
# CONFIG_MCUMGR_SMP_BT is not set
# CONFIG_MCUMGR_SMP_SHELL is not set
# CONFIG_MCUMGR_SMP_UART is not set
# CONFIG_MCUMGR_SMP_UDP is not set
# end of Transports and Transport Related Configuration Options

# CONFIG_HAWKBIT is not set
# CONFIG_UPDATEHUB is not set
# CONFIG_OSDP is not set
# end of Device Management

# CONFIG_MODBUS is not set

#
# Networking
#
CONFIG_NET_BUF=y
CONFIG_NET_BUF_USER_DATA_SIZE=0
# CONFIG_NET_BUF_LOG is not set
# CONFIG_NET_BUF_POOL_USAGE is not set
CONFIG_NETWORKING=y
# CONFIG_NET_HOSTNAME_ENABLE is not set

#
# Link layer options
#
# CONFIG_NET_L2_DUMMY is not set
# CONFIG_NET_L2_BT_SHELL is not set
# CONFIG_NET_L2_VIRTUAL is not set
# CONFIG_NET_L2_PPP is not set
CONFIG_NET_L2_PHY_IEEE802154=y
# CONFIG_NET_L2_OPENTHREAD is not set
CONFIG_NET_L2_CUSTOM_IEEE802154=y
CONFIG_NET_L2_CUSTOM_IEEE802154_MTU=127
# CONFIG_NET_L2_CANBUS_RAW is not set
# CONFIG_NET_L2_WIFI_MGMT is not set
# CONFIG_NET_L2_WIFI_SHELL is not set
# CONFIG_NET_L2_PTP is not set
# end of Link layer options

#
# IP stack
#
CONFIG_NET_NATIVE=y
CONFIG_NET_NATIVE_IPV6=y
# CONFIG_NET_OFFLOAD is not set
CONFIG_NET_INIT_PRIO=90
CONFIG_NET_IF_MAX_IPV6_COUNT=1
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=2
CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=3
CONFIG_NET_IF_IPV6_PREFIX_COUNT=2
CONFIG_NET_INITIAL_HOP_LIMIT=64
CONFIG_NET_IPV6_MAX_NEIGHBORS=8
# CONFIG_NET_IPV6_FRAGMENT is not set
# CONFIG_NET_6LO is not set
CONFIG_NET_IPV6_LOG_LEVEL=0
CONFIG_NET_ICMPV6_LOG_LEVEL=0
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL=0
# CONFIG_NET_IPV4 is not set
# CONFIG_NET_SHELL is not set
CONFIG_NET_TC_TX_COUNT=0
CONFIG_NET_TC_RX_COUNT=1
# CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO is not set
CONFIG_NET_TC_THREAD_COOPERATIVE=y
# CONFIG_NET_TC_THREAD_PREEMPTIVE is not set
CONFIG_NET_TC_NUM_PRIORITIES=16
CONFIG_NET_TC_MAPPING_STRICT=y
CONFIG_NET_TX_DEFAULT_PRIORITY=1
CONFIG_NET_RX_DEFAULT_PRIORITY=0
# CONFIG_NET_IP_ADDR_CHECK is not set
CONFIG_NET_MAX_ROUTERS=1
# CONFIG_NET_TCP is not set
# CONFIG_NET_TEST_PROTOCOL is not set
# CONFIG_NET_UDP is not set
CONFIG_NET_MAX_CONTEXTS=6
# CONFIG_NET_CONTEXT_NET_PKT_POOL is not set
CONFIG_NET_CONTEXT_SYNC_RECV=y
CONFIG_NET_CONTEXT_CHECK=y
# CONFIG_NET_CONTEXT_PRIORITY is not set
# CONFIG_NET_CONTEXT_TXTIME is not set
# CONFIG_NET_CONTEXT_RCVTIMEO is not set
# CONFIG_NET_CONTEXT_SNDTIMEO is not set
# CONFIG_NET_CONTEXT_RCVBUF is not set
# CONFIG_NET_CONTEXT_SNDBUF is not set
# CONFIG_NET_TEST is not set
# CONFIG_NET_TRICKLE is not set
CONFIG_NET_BUF_RX_COUNT=16
CONFIG_NET_BUF_TX_COUNT=16
CONFIG_NET_BUF_FIXED_DATA_SIZE=y
# CONFIG_NET_BUF_VARIABLE_DATA_SIZE is not set
CONFIG_NET_BUF_DATA_SIZE=128
CONFIG_NET_DEFAULT_IF_FIRST=y
# CONFIG_NET_DEFAULT_IF_UP is not set
# CONFIG_NET_PKT_TIMESTAMP_THREAD is not set
# CONFIG_NET_PROMISCUOUS_MODE is not set
# CONFIG_NET_DISABLE_ICMP_DESTINATION_UNREACHABLE is not set

#
# Stack usage
#
CONFIG_NET_TX_STACK_SIZE=1200
CONFIG_NET_RX_STACK_SIZE=1500
# end of Stack usage

# CONFIG_NET_MGMT is not set
# CONFIG_NET_STATISTICS is not set
# CONFIG_NET_LOG is not set
CONFIG_NET_PKT_LOG_LEVEL=0
# CONFIG_NET_DEBUG_NET_PKT_ALLOC is not set
CONFIG_NET_DEBUG_NET_PKT_EXTERNALS=0
# CONFIG_NET_DEBUG_NET_PKT_NON_FRAGILE_ACCESS is not set
CONFIG_NET_CORE_LOG_LEVEL=0
CONFIG_NET_IF_LOG_LEVEL=0
CONFIG_NET_TC_LOG_LEVEL=0
CONFIG_NET_UTILS_LOG_LEVEL=0
CONFIG_NET_CONTEXT_LOG_LEVEL=0
CONFIG_NET_CONN_LOG_LEVEL=0
CONFIG_NET_ROUTE_LOG_LEVEL=0
# end of IP stack

#
# Network Packet Filtering
#
# CONFIG_NET_PKT_FILTER is not set
# end of Network Packet Filtering

#
# Network Protocols
#
# CONFIG_COAP is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_DNS_SD is not set
# CONFIG_MQTT_LIB is not set
# CONFIG_TFTP_LIB is not set
# CONFIG_HTTP_PARSER is not set
# CONFIG_HTTP_PARSER_URL is not set
# CONFIG_HTTP_CLIENT is not set
CONFIG_NET_HTTP_LOG_LEVEL=0
# CONFIG_WEBSOCKET_CLIENT is not set
# CONFIG_LWM2M is not set
# CONFIG_SOCKS is not set
# end of Network Protocols

#
# Network Libraries
#
CONFIG_NET_CONFIG_AUTO_INIT=y
CONFIG_NET_CONFIG_INIT_PRIO=95
CONFIG_NET_CONFIG_INIT_TIMEOUT=30
# CONFIG_NET_CONFIG_NEED_IPV6_ROUTER is not set
# CONFIG_NET_CONFIG_NEED_IPV4 is not set
CONFIG_NET_CONFIG_LOG_LEVEL=0
# CONFIG_NET_CONFIG_SETTINGS is not set
# CONFIG_NET_SOCKETS is not set
# CONFIG_TLS_CREDENTIALS is not set
# end of Network Libraries

#
# Network additional services
#
# CONFIG_NET_CONNECTION_MANAGER is not set
# CONFIG_NET_CAPTURE is not set
# end of Network additional services
# end of Networking

#
# Portability
#
# end of Portability

#
# Power Management
#
# CONFIG_PM_S2RAM is not set
CONFIG_PM_POLICY_DEFAULT=y
# CONFIG_PM_POLICY_CUSTOM is not set
# end of Power Management

# CONFIG_SHELL is not set
# CONFIG_STATS is not set
# CONFIG_USB_DEVICE_STACK is not set
# CONFIG_SD_STACK is not set
CONFIG_IMG_MANAGER=y
CONFIG_MCUBOOT_IMG_MANAGER=y
CONFIG_MCUBOOT_TRAILER_SWAP_TYPE=y
CONFIG_IMG_BLOCK_BUF_SIZE=512
CONFIG_IMG_ERASE_PROGRESSIVELY=y
# CONFIG_IMG_ENABLE_IMAGE_CHECK is not set
CONFIG_UPDATEABLE_IMAGE_NUMBER=1

#
# Random Number Generators
#
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR=y
# CONFIG_XOROSHIRO_RANDOM_GENERATOR is not set
# CONFIG_XOSHIRO_RANDOM_GENERATOR is not set
CONFIG_CSPRING_ENABLED=y
CONFIG_HARDWARE_DEVICE_CS_GENERATOR=y
# end of Random Number Generators

#
# Storage
#
CONFIG_FLASH_MAP=y
# CONFIG_FLASH_AREA_CHECK_INTEGRITY is not set
CONFIG_STREAM_FLASH=y
CONFIG_STREAM_FLASH_ERASE=y
# end of Storage

# CONFIG_SETTINGS is not set
# CONFIG_TASK_WDT is not set

#
# Testing
#
# CONFIG_ZTEST is not set
# CONFIG_ZTEST_MOCKING is not set
# CONFIG_ZTRESS is not set
# CONFIG_TEST is not set
# CONFIG_TEST_USERSPACE is not set
# end of Testing

# CONFIG_TIMING_FUNCTIONS is not set
# CONFIG_TRACING is not set
# CONFIG_RTIO is not set
# end of Sub Systems and OS Services

CONFIG_TOOLCHAIN_ZEPHYR_0_16=y
CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_THREAD_LOCAL_STORAGE=y

#
# Build and Link Features
#

#
# Linker Options
#
# CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set
CONFIG_LINKER_ORPHAN_SECTION_WARN=y
# CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set
CONFIG_HAS_FLASH_LOAD_OFFSET=y
CONFIG_USE_DT_CODE_PARTITION=y
CONFIG_FLASH_LOAD_OFFSET=0xc000
CONFIG_FLASH_LOAD_SIZE=0x67000
CONFIG_LD_LINKER_SCRIPT_SUPPORTED=y
CONFIG_LD_LINKER_TEMPLATE=y
# CONFIG_CMAKE_LINKER_GENERATOR is not set
# CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set
CONFIG_KERNEL_ENTRY="__start"
CONFIG_LINKER_SORT_BY_ALIGNMENT=y
CONFIG_SRAM_OFFSET=0

#
# Linker Sections
#
# CONFIG_LINKER_USE_BOOT_SECTION is not set
# CONFIG_LINKER_USE_PINNED_SECTION is not set
CONFIG_LINKER_GENERIC_SECTIONS_PRESENT_AT_BOOT=y
# end of Linker Sections
# end of Linker Options

#
# Compiler Options
#
# CONFIG_CODING_GUIDELINE_CHECK is not set
# CONFIG_NATIVE_APPLICATION is not set
CONFIG_SIZE_OPTIMIZATIONS=y
# CONFIG_SPEED_OPTIMIZATIONS is not set
# CONFIG_DEBUG_OPTIMIZATIONS is not set
# CONFIG_NO_OPTIMIZATIONS is not set
CONFIG_COMPILER_COLOR_DIAGNOSTICS=y
CONFIG_COMPILER_OPT=""
# CONFIG_MISRA_SANE is not set
# end of Compiler Options

# CONFIG_ASSERT_ON_ERRORS is not set
# CONFIG_NO_RUNTIME_CHECKS is not set
CONFIG_RUNTIME_ERROR_CHECKS=y

#
# Build Options
#
CONFIG_KERNEL_BIN_NAME="zephyr"
CONFIG_OUTPUT_STAT=y
# CONFIG_OUTPUT_SYMBOLS is not set
CONFIG_OUTPUT_DISASSEMBLY=y
# CONFIG_OUTPUT_DISASSEMBLE_ALL is not set
CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y
# CONFIG_CLEANUP_INTERMEDIATE_FILES is not set
# CONFIG_BUILD_NO_GAP_FILL is not set
CONFIG_BUILD_OUTPUT_BIN=y
# CONFIG_BUILD_OUTPUT_EXE is not set
# CONFIG_BUILD_OUTPUT_S19 is not set
# CONFIG_BUILD_OUTPUT_UF2 is not set
# CONFIG_BUILD_OUTPUT_STRIPPED is not set
# CONFIG_BUILD_OUTPUT_INFO_HEADER is not set
# CONFIG_APPLICATION_DEFINED_SYSCALL is not set
# CONFIG_MAKEFILE_EXPORTS is not set
CONFIG_BUILD_OUTPUT_META=y
# CONFIG_BUILD_OUTPUT_META_STATE_PROPAGATE is not set
# end of Build Options

CONFIG_WARN_DEPRECATED=y
CONFIG_ENFORCE_ZEPHYR_STDINT=y
# end of Build and Link Features

#
# Boot Options
#
# CONFIG_IS_BOOTLOADER is not set
CONFIG_MCUBOOT_SIGNATURE_KEY_FILE=""
CONFIG_MCUBOOT_EXTRA_IMGTOOL_ARGS=""
# CONFIG_MCUBOOT_GENERATE_UNSIGNED_IMAGE is not set
# CONFIG_MCUBOOT_GENERATE_CONFIRMED_IMAGE is not set
# CONFIG_BOOTLOADER_BOSSA is not set
# end of Boot Options

#
# Compatibility
#
CONFIG_COMPAT_INCLUDES=y
# end of Compatibility

CONFIG_LEGACY_INCLUDE_PATH=y

Yes, we have physical access to the UART interface on our hardware. Could you please guide us on how to collect ZBOSS trace logs? We have checked the return status of zb_bdb_close_network(), and it always returns RET_OK, both when the issue occurs and when there are no issues.

[AHaug]

Hi,

We had a look at the sniffer logs: 0x2a19 sends a permit join request right before the ZC opens the network, so the ZC behaves according to the specification.

Zigbee R22 spec section 2.4.3.3.7 Mgmt_Permit_Joining_req:

In addition the team spotted that based on the sniffer log, your device is a ZR, not a ZED. It’s possible the youæve called it an end device by mistake but knowing the correct role might be important if we need to investigate why it sends a permit join request

Kind regards,
Andreas