Issue with Stereo Sound from External Codec on nRF5340 DK (SDK v2.6.2)

[Abdulmohaimen]

Hello Team,

I am experiencing an issue with the sound output from an external codec connected to the nRF5340 DK. Currently, the sound is in mono, but my goal is to achieve stereo sound for both the left and right channels.

I read in an article that the configuration may need to be edited to enable stereo output from the external codec. I am using SDK v2.6.2 and would appreciate any guidance or suggestions on how to adjust the configuration to resolve this issue.

Thank you for your support!

Regards,

Abdulmohaimen Algamoudi

[dejans]

Hi,

Could you please provide more information about your setup?

Which external codec do you use?

Best regards,
Dejan

[Abdulmohaimen]

Hi, 

Thank you for your swift reply.

I am using the DA7212 evaluation board, and I can hear sound from the jacks on the DA7212 board. I followed the instructions from Nordic to enable the external codec.

However, I am still working on achieving stereo sound, as the current output is mono. Any further guidance would be greatly appreciated.

Best regards,

Abdulmohaimen Algamoudi

[dejans]

Hi Abdulmohaimen,

Can you provide details of your setup?

Best regards,
Dejan

[Abdulmohaimen]

Hi Dejan,

I am using three nRF5340 DKs—one as a gateway and two as headsets (Left and Right). Both headsets are configured to connect to the DA7212 external codec. However, I am only hearing mono sound from the headsets instead of stereo.

Could you please provide further assistance on how to enable stereo sound in this setup?

Best regards,

[dejans]

Hi,

You could have a look at these potentially relevant discussions - stereo output using external codec and stream multiple stereo audio. If these links do not provide you with relevant information and that is not what you try to achieve, please provide more information about your use case.

Best regards,
Dejan