Hi,
Can you elaborate a bit on what you are doing, how you ave attempted to interface th empu6050, and share the full build log? (You can use Insert -> Code to make it readable)
-- Configuring incomplete, errors occurred!
See also "C:/peripheral_lbs/build/peripheral_lbs/CMakeFiles/CMakeOutput.log".
See also "C:/peripheral_lbs/build/peripheral_lbs/CMakeFiles/CMakeError.log".
ninja: error: rebuilding 'build.ninja': subcommand failed
FAILED: build.ninja
C:\ncs\toolchains\b620d30767\opt\bin\cmake.exe --regenerate-during-build -SC:\peripheral_lbs -BC:\peripheral_lbs\build\peripheral_lbs
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\b620d30767\opt\bin\cmake.EXE' --build 'c:\peripheral_lbs\build\peripheral_lbs'
* The terminal process terminated with exit code: 1.
* Terminal will be reused by tasks, press any key to close it.
Hi,
I am unfortunately not able to say much more from this. Can you share the full build log (including the first lines where we see west build command etc). Also, can you share any changes you have made?
Please note that the holiday season is starting now, so anwers will be delayed.
Hi,
I am unfortunately not able to say much more from this. Can you share the full build log (including the first lines where we see west build command etc). Also, can you share any changes you have made?
Please note that the holiday season is starting now, so anwers will be delayed.
Hi,
I have a problem same,
I just build a project blink sample on NRF54L15 DK, I don't change this code. Please help me solution.
Hi,
Can you share the build log, which you find under the TERINAL tab?
Same here
problem to build with new sdk 2.9.0
on-void function [-Wreturn-type]
540 | }
| ^
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: At top level:
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:298:12: warning: 'mtu_exchange' defined but not used [-Wunused-function]
298 | static int mtu_exchange(struct bt_conn *conn)
| ^~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:239:36: warning: 'conn_auth_info_callbacks' defined but not used [-Wunused-variable]
239 | static struct bt_conn_auth_info_cb conn_auth_info_callbacks = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:216:25: warning: 'app_callbacks' defined but not used [-Wunused-variable]
216 | static struct my_lbs_cb app_callbacks = {
| ^~~~~~~~~~~~~
In file included from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:4:
/Users/sh/dev/git/trailpulse-edge/src/peripherals/adc/saadc.h:14:29: warning: 'adc' defined but not used [-Wunused-variable]
14 | static const struct device *adc = DEVICE_DT_GET(ADC_NODE);
| ^~~
[6/19] Linking C static library app/libapp.a
[7/19] Linking C executable zephyr/zephyr_pre0.elf
[8/19] Generating linker.cmd
[9/19] Generating isr_tables.c, isr_tables_vt.ld, isr_tables_swi.ld
[10/19] Building C object zephyr/CMakeFiles/zephyr_final.dir/isr_tables.c.obj
[11/19] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 395184 B 491008 B 80.48%
RAM: 142364 B 256 KB 54.31%
IDT_LIST: 0 GB 32 KB 0.00%
[12/19] Generating zephyr/mcuboot_primary_app.hex
[13/19] Generating zephyr/mcuboot_primary.hex
[14/19] Generating ../../zephyr/app_update.bin
image.py: sign the payload
[15/19] Generating ../../zephyr/dfu_application.zip
[16/19] Generating ../../zephyr/app_signed.hex
image.py: sign the payload
[17/19] Generating ../../zephyr/app_test_update.hex
image.py: sign the payload
[18/19] Generating ../../zephyr/app_moved_test_update.hex
[19/19] Generating zephyr/merged.hex
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Flash: trailpulse-edge/build_v4_debug (active)
Flashing build_v4_debug to 1050238934
west flash -d /Users/sh/dev/git/trailpulse-edge/build_v4_debug --skip-rebuild --dev-id 1050238934 --erase
-- west flash: using runner nrfjprog
-- runners.nrfjprog: mass erase requested
-- runners.nrfjprog: reset after flashing requested
-- runners.nrfjprog: Flashing file: /Users/sh/dev/git/trailpulse-edge/build_v4_debug/zephyr/merged.hex
[ ###### ] 0.000s | Erase file - Check image [ #################### ] 0.299s | Erase file - Done erasing
[ ###### ] 0.000s | Program file - Checking image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 0.000s | Check image validity - block 1 of 3 [ ################ ] 0.001s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Program file - Programming [ ###### ] 0.000s | Programming image - block 1 of 2 [ ############# ] 0.118s | Programming image - block 2 of 2 [ #################### ] 0.000s | Programming image - Write successful [ #################### ] 2.815s | Program file - Done programming
[ ###### ] 0.000s | Verify file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 1.978s | Check image validity - block 1 of 3 [ ################ ] 0.743s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Verify file - Verifying [ ###### ] 0.000s | Verifying image - block 1 of 2 [ ############# ] 0.119s | Verifying image - block 2 of 2 [ #################### ] 0.000s | Verifying image - Verify successful [ #################### ] 2.882s | Verify file - Done verifying
Enabling pin reset.
Applying pin reset.
-- runners.nrfjprog: Board with serial number 1050238934 flashed successfully.
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Build: trailpulse-edge/build_v4_debug (active)
Building trailpulse-edge
west build --build-dir /Users/sh/dev/git/trailpulse-edge/build_v4_debug /Users/sh/dev/git/trailpulse-edge
[0/18] Performing build step for 'mcuboot_subimage'
ninja: no work to do.
[2/16] Building C object CMakeFiles/app.dir/src/storage/config.c.obj
/Users/sh/dev/git/trailpulse-edge/src/storage/config.c:14:21: warning: extra tokens at end of #ifdef directive
14 | #ifdef CONFIG_LOG == y
| ^~
[3/16] Linking C static library app/libapp.a
[4/16] Linking C executable zephyr/zephyr_pre0.elf
[5/16] Generating linker.cmd
[6/16] Generating isr_tables.c, isr_tables_vt.ld, isr_tables_swi.ld
[7/16] Building C object zephyr/CMakeFiles/zephyr_final.dir/isr_tables.c.obj
[8/16] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 395184 B 491008 B 80.48%
RAM: 142364 B 256 KB 54.31%
IDT_LIST: 0 GB 32 KB 0.00%
[9/16] Generating zephyr/mcuboot_primary.hex
[10/16] Generating zephyr/mcuboot_primary_app.hex
[11/16] Generating ../../zephyr/app_update.bin
image.py: sign the payload
[12/16] Generating ../../zephyr/dfu_application.zip
[13/16] Generating ../../zephyr/app_signed.hex
image.py: sign the payload
[14/16] Generating ../../zephyr/app_test_update.hex
image.py: sign the payload
[15/16] Generating ../../zephyr/app_moved_test_update.hex
[16/16] Generating zephyr/merged.hex
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Flash: trailpulse-edge/build_v4_debug (active)
Flashing build_v4_debug to 1050238934
west flash -d /Users/sh/dev/git/trailpulse-edge/build_v4_debug --skip-rebuild --dev-id 1050238934 --erase
-- west flash: using runner nrfjprog
-- runners.nrfjprog: mass erase requested
-- runners.nrfjprog: reset after flashing requested
-- runners.nrfjprog: Flashing file: /Users/sh/dev/git/trailpulse-edge/build_v4_debug/zephyr/merged.hex
[ ###### ] 0.000s | Erase file - Check image [ #################### ] 0.271s | Erase file - Done erasing
[ ###### ] 0.000s | Program file - Checking image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 0.000s | Check image validity - block 1 of 3 [ ################ ] 0.001s | Check image validity - block 2 of 3 [ #################### ] 0.012s | Check image validity - Finished [ ############# ] 0.000s | Program file - Programming [ ###### ] 0.000s | Programming image - block 1 of 2 [ ############# ] 0.117s | Programming image - block 2 of 2 [ #################### ] 0.000s | Programming image - Write successful [ #################### ] 2.812s | Program file - Done programming
[ ###### ] 0.000s | Verify file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 1.968s | Check image validity - block 1 of 3 [ ################ ] 0.740s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Verify file - Verifying [ ###### ] 0.000s | Verifying image - block 1 of 2 [ ############# ] 0.119s | Verifying image - block 2 of 2 [ #################### ] 0.000s | Verifying image - Verify successful [ #################### ] 2.886s | Verify file - Done verifying
Enabling pin reset.
Applying pin reset.
-- runners.nrfjprog: Board with serial number 1050238934 flashed successfully.
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Build: trailpulse-edge/build_v4_debug (active)
Building trailpulse-edge
west build --build-dir /Users/sh/dev/git/trailpulse-edge/build_v4_debug /Users/sh/dev/git/trailpulse-edge
[0/18] Performing build step for 'mcuboot_subimage'
ninja: no work to do.
[2/16] Building C object CMakeFiles/app.dir/src/communication/ble/ble_peripheral.c.obj
In file included from /opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log.h:11,
from /opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/shell/shell.h:17,
from /opt/nordic/ncs/v2.6.1/nrf/include/shell/shell_bt_nus.h:10,
from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:17,
from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:1:
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: In function 'current_time_print':
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:17: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'int64_t' {aka 'long long int'} [-Wformat=]
91 | LOG_INF("Time received now %u\n", time);
| ^~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
| |
| int64_t {aka long long int}
/opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log_core.h:245:42: note: in definition of macro 'Z_LOG2'
245 | z_log_printf_arg_checker(__VA_ARGS__); \
| ^~~~~~~~~~~
/opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log.h:63:24: note: in expansion of macro 'Z_LOG'
63 | #define LOG_INF(...) Z_LOG(LOG_LEVEL_INF, __VA_ARGS__)
| ^~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:9: note: in expansion of macro 'LOG_INF'
91 | LOG_INF("Time received now %u\n", time);
| ^~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:37: note: format string is defined here
91 | LOG_INF("Time received now %u\n", time);
| ~^
| |
| unsigned int
| %llu
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: In function 'init_and_enable_ble':
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:495:17: warning: implicit declaration of function 'settings_load' [-Wimplicit-function-declaration]
495 | settings_load();
| ^~~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:541:1: warning: control reaches end of non-void function [-Wreturn-type]
541 | }
| ^
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: At top level:
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:298:12: warning: 'mtu_exchange' defined but not used [-Wunused-function]
298 | static int mtu_exchange(struct bt_conn *conn)
| ^~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:239:36: warning: 'conn_auth_info_callbacks' defined but not used [-Wunused-variable]
239 | static struct bt_conn_auth_info_cb conn_auth_info_callbacks = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:216:25: warning: 'app_callbacks' defined but not used [-Wunused-variable]
216 | static struct my_lbs_cb app_callbacks = {
| ^~~~~~~~~~~~~
In file included from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:4:
/Users/sh/dev/git/trailpulse-edge/src/peripherals/adc/saadc.h:14:29: warning: 'adc' defined but not used [-Wunused-variable]
14 | static const struct device *adc = DEVICE_DT_GET(ADC_NODE);
| ^~~
[3/16] Linking C static library app/libapp.a
[4/16] Linking C executable zephyr/zephyr_pre0.elf
[5/16] Generating linker.cmd
[6/16] Generating isr_tables.c, isr_tables_vt.ld, isr_tables_swi.ld
[7/16] Building C object zephyr/CMakeFiles/zephyr_final.dir/isr_tables.c.obj
[8/16] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 395184 B 491008 B 80.48%
RAM: 142364 B 256 KB 54.31%
IDT_LIST: 0 GB 32 KB 0.00%
[9/16] Generating zephyr/mcuboot_primary.hex
[10/16] Generating zephyr/mcuboot_primary_app.hex
[11/16] Generating ../../zephyr/app_update.bin
image.py: sign the payload
[12/16] Generating ../../zephyr/dfu_application.zip
[13/16] Generating ../../zephyr/app_signed.hex
image.py: sign the payload
[14/16] Generating ../../zephyr/app_test_update.hex
image.py: sign the payload
[15/16] Generating ../../zephyr/app_moved_test_update.hex
[16/16] Generating zephyr/merged.hex
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Flash: trailpulse-edge/build_v4_debug (active)
Flashing build_v4_debug to 1050238934
west flash -d /Users/sh/dev/git/trailpulse-edge/build_v4_debug --skip-rebuild --dev-id 1050238934
-- west flash: using runner nrfjprog
-- runners.nrfjprog: reset after flashing requested
-- runners.nrfjprog: Flashing file: /Users/sh/dev/git/trailpulse-edge/build_v4_debug/zephyr/merged.hex
[ ###### ] 0.000s | Erase file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 0.000s | Check image validity - block 1 of 3 [ ################ ] 0.001s | Check image validity - block 2 of 3 [ #################### ] 0.005s | Check image validity - Finished [ ############# ] 0.000s | Erase file - Erasing [ ###### ] 0.000s | Erasing non-volatile memory - block 1 of 2 [ ############# ] 0.955s | Erasing non-volatile memory - block 2 of 2 [ #################### ] 0.000s | Erasing non-volatile memory - Erase successful [ #################### ] 11.506s | Erase file - Done erasing
[ ###### ] 0.000s | Program file - Checking image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 7.813s | Check image validity - block 1 of 3 [ ################ ] 2.931s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Program file - Programming [ ###### ] 0.000s | Programming image - block 1 of 2 [ ############# ] 0.118s | Programming image - block 2 of 2 [ #################### ] 0.000s | Programming image - Write successful [ #################### ] 2.815s | Program file - Done programming
[ ###### ] 0.000s | Verify file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 9.784s | Check image validity - block 1 of 3 [ ################ ] 3.671s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Verify file - Verifying [ ###### ] 0.000s | Verifying image - block 1 of 2 [ ############# ] 0.119s | Verifying image - block 2 of 2 [ #################### ] 0.000s | Verifying image - Verify successful [ #################### ] 2.910s | Verify file - Done verifying
Enabling pin reset.
Applying pin reset.
-- runners.nrfjprog: Board with serial number 1050238934 flashed successfully.
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Build: trailpulse-edge/build_v4_debug (active)
Building trailpulse-edge
west build --build-dir /Users/sh/dev/git/trailpulse-edge/build_v4_debug /Users/sh/dev/git/trailpulse-edge
[0/19] Performing build step for 'mcuboot_subimage'
ninja: no work to do.
[2/17] Building C object CMakeFiles/app.dir/src/peripherals/nfc/nfc.c.obj
In file included from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:4,
from /Users/sh/dev/git/trailpulse-edge/src/peripherals/nfc/nfc.c:5:
/Users/sh/dev/git/trailpulse-edge/src/peripherals/adc/saadc.h:14:29: warning: 'adc' defined but not used [-Wunused-variable]
14 | static const struct device *adc = DEVICE_DT_GET(ADC_NODE);
| ^~~
[3/17] Building C object CMakeFiles/app.dir/src/communication/ble/ble_peripheral.c.obj
In file included from /opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log.h:11,
from /opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/shell/shell.h:17,
from /opt/nordic/ncs/v2.6.1/nrf/include/shell/shell_bt_nus.h:10,
from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:17,
from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:1:
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: In function 'current_time_print':
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:17: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'int64_t' {aka 'long long int'} [-Wformat=]
91 | LOG_INF("Time received now %u\n", time);
| ^~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
| |
| int64_t {aka long long int}
/opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log_core.h:245:42: note: in definition of macro 'Z_LOG2'
245 | z_log_printf_arg_checker(__VA_ARGS__); \
| ^~~~~~~~~~~
/opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log.h:63:24: note: in expansion of macro 'Z_LOG'
63 | #define LOG_INF(...) Z_LOG(LOG_LEVEL_INF, __VA_ARGS__)
| ^~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:9: note: in expansion of macro 'LOG_INF'
91 | LOG_INF("Time received now %u\n", time);
| ^~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:37: note: format string is defined here
91 | LOG_INF("Time received now %u\n", time);
| ~^
| |
| unsigned int
| %llu
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: In function 'init_and_enable_ble':
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:495:17: warning: implicit declaration of function 'settings_load' [-Wimplicit-function-declaration]
495 | settings_load();
| ^~~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:541:1: warning: control reaches end of non-void function [-Wreturn-type]
541 | }
| ^
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: At top level:
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:298:12: warning: 'mtu_exchange' defined but not used [-Wunused-function]
298 | static int mtu_exchange(struct bt_conn *conn)
| ^~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:239:36: warning: 'conn_auth_info_callbacks' defined but not used [-Wunused-variable]
239 | static struct bt_conn_auth_info_cb conn_auth_info_callbacks = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:216:25: warning: 'app_callbacks' defined but not used [-Wunused-variable]
216 | static struct my_lbs_cb app_callbacks = {
| ^~~~~~~~~~~~~
In file included from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:4:
/Users/sh/dev/git/trailpulse-edge/src/peripherals/adc/saadc.h:14:29: warning: 'adc' defined but not used [-Wunused-variable]
14 | static const struct device *adc = DEVICE_DT_GET(ADC_NODE);
| ^~~
[4/17] Linking C static library app/libapp.a
[5/17] Linking C executable zephyr/zephyr_pre0.elf
[6/17] Generating linker.cmd
[7/17] Generating isr_tables.c, isr_tables_vt.ld, isr_tables_swi.ld
[8/17] Building C object zephyr/CMakeFiles/zephyr_final.dir/isr_tables.c.obj
[9/17] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 386 KB 491008 B 80.50%
RAM: 142364 B 256 KB 54.31%
IDT_LIST: 0 GB 32 KB 0.00%
[10/17] Generating zephyr/mcuboot_primary_app.hex
[11/17] Generating zephyr/mcuboot_primary.hex
[12/17] Generating ../../zephyr/app_update.bin
image.py: sign the payload
[13/17] Generating ../../zephyr/dfu_application.zip
[14/17] Generating ../../zephyr/app_signed.hex
image.py: sign the payload
[15/17] Generating ../../zephyr/app_test_update.hex
image.py: sign the payload
[16/17] Generating ../../zephyr/app_moved_test_update.hex
[17/17] Generating zephyr/merged.hex
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Flash: trailpulse-edge/build_v4_debug (active)
Flashing build_v4_debug to 1050238934
west flash -d /Users/sh/dev/git/trailpulse-edge/build_v4_debug --skip-rebuild --dev-id 1050238934
-- west flash: using runner nrfjprog
-- runners.nrfjprog: reset after flashing requested
-- runners.nrfjprog: Flashing file: /Users/sh/dev/git/trailpulse-edge/build_v4_debug/zephyr/merged.hex
[ ###### ] 0.000s | Erase file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 0.000s | Check image validity - block 1 of 3 [ ################ ] 0.002s | Check image validity - block 2 of 3 [ #################### ] 0.010s | Check image validity - Finished [ ############# ] 0.000s | Erase file - Erasing [ ###### ] 0.000s | Erasing non-volatile memory - block 1 of 2 [ ############# ] 0.481s | Erasing non-volatile memory - block 2 of 2 [ #################### ] 0.000s | Erasing non-volatile memory - Erase successful [ #################### ] 10.867s | Erase file - Done erasing
[ ###### ] 0.000s | Program file - Checking image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 7.401s | Check image validity - block 1 of 3 [ ################ ] 2.777s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Program file - Programming [ ###### ] 0.000s | Programming image - block 1 of 2 [ ############# ] 0.118s | Programming image - block 2 of 2 [ #################### ] 0.000s | Programming image - Write successful [ #################### ] 2.811s | Program file - Done programming
[ ###### ] 0.000s | Verify file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 9.365s | Check image validity - block 1 of 3 [ ################ ] 3.513s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Verify file - Verifying [ ###### ] 0.000s | Verifying image - block 1 of 2 [ ############# ] 0.119s | Verifying image - block 2 of 2 [ #################### ] 0.000s | Verifying image - Verify successful [ #################### ] 2.882s | Verify file - Done verifying
Enabling pin reset.
Applying pin reset.
-- runners.nrfjprog: Board with serial number 1050238934 flashed successfully.
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Build: trailpulse-edge/build_v4_debug (active)
Building trailpulse-edge
west build --build-dir /Users/sh/dev/git/trailpulse-edge/build_v4_debug /Users/sh/dev/git/trailpulse-edge
[0/18] Performing build step for 'mcuboot_subimage'
ninja: no work to do.
[2/16] Building C object CMakeFiles/app.dir/src/communication/ble/ble_peripheral.c.obj
In file included from /opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log.h:11,
from /opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/shell/shell.h:17,
from /opt/nordic/ncs/v2.6.1/nrf/include/shell/shell_bt_nus.h:10,
from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:17,
from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:1:
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: In function 'current_time_print':
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:17: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'int64_t' {aka 'long long int'} [-Wformat=]
91 | LOG_INF("Time received now %u\n", time);
| ^~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
| |
| int64_t {aka long long int}
/opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log_core.h:245:42: note: in definition of macro 'Z_LOG2'
245 | z_log_printf_arg_checker(__VA_ARGS__); \
| ^~~~~~~~~~~
/opt/nordic/ncs/v2.6.1/zephyr/include/zephyr/logging/log.h:63:24: note: in expansion of macro 'Z_LOG'
63 | #define LOG_INF(...) Z_LOG(LOG_LEVEL_INF, __VA_ARGS__)
| ^~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:9: note: in expansion of macro 'LOG_INF'
91 | LOG_INF("Time received now %u\n", time);
| ^~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:91:37: note: format string is defined here
91 | LOG_INF("Time received now %u\n", time);
| ~^
| |
| unsigned int
| %llu
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: In function 'init_and_enable_ble':
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:497:17: warning: implicit declaration of function 'settings_load' [-Wimplicit-function-declaration]
497 | settings_load();
| ^~~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:543:1: warning: control reaches end of non-void function [-Wreturn-type]
543 | }
| ^
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c: At top level:
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:298:12: warning: 'mtu_exchange' defined but not used [-Wunused-function]
298 | static int mtu_exchange(struct bt_conn *conn)
| ^~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:239:36: warning: 'conn_auth_info_callbacks' defined but not used [-Wunused-variable]
239 | static struct bt_conn_auth_info_cb conn_auth_info_callbacks = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
/Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.c:216:25: warning: 'app_callbacks' defined but not used [-Wunused-variable]
216 | static struct my_lbs_cb app_callbacks = {
| ^~~~~~~~~~~~~
In file included from /Users/sh/dev/git/trailpulse-edge/src/communication/ble/ble_peripheral.h:4:
/Users/sh/dev/git/trailpulse-edge/src/peripherals/adc/saadc.h:14:29: warning: 'adc' defined but not used [-Wunused-variable]
14 | static const struct device *adc = DEVICE_DT_GET(ADC_NODE);
| ^~~
[3/16] Linking C static library app/libapp.a
[4/16] Linking C executable zephyr/zephyr_pre0.elf
[5/16] Generating linker.cmd
[6/16] Generating isr_tables.c, isr_tables_vt.ld, isr_tables_swi.ld
[7/16] Building C object zephyr/CMakeFiles/zephyr_final.dir/isr_tables.c.obj
[8/16] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 395296 B 491008 B 80.51%
RAM: 142364 B 256 KB 54.31%
IDT_LIST: 0 GB 32 KB 0.00%
[9/16] Generating zephyr/mcuboot_primary_app.hex
[10/16] Generating zephyr/mcuboot_primary.hex
[11/16] Generating ../../zephyr/app_update.bin
image.py: sign the payload
[12/16] Generating ../../zephyr/dfu_application.zip
[13/16] Generating ../../zephyr/app_signed.hex
image.py: sign the payload
[14/16] Generating ../../zephyr/app_test_update.hex
image.py: sign the payload
[15/16] Generating ../../zephyr/app_moved_test_update.hex
[16/16] Generating zephyr/merged.hex
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Flash: trailpulse-edge/build_v4_debug (active)
Flashing build_v4_debug to 1050238934
west flash -d /Users/sh/dev/git/trailpulse-edge/build_v4_debug --skip-rebuild --dev-id 1050238934
-- west flash: using runner nrfjprog
-- runners.nrfjprog: reset after flashing requested
-- runners.nrfjprog: Flashing file: /Users/sh/dev/git/trailpulse-edge/build_v4_debug/zephyr/merged.hex
[ ###### ] 0.000s | Erase file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 0.000s | Check image validity - block 1 of 3 [ ################ ] 0.001s | Check image validity - block 2 of 3 [ #################### ] 0.005s | Check image validity - Finished [ ############# ] 0.000s | Erase file - Erasing [ ###### ] 0.000s | Erasing non-volatile memory - block 1 of 2 [ ############# ] 0.450s | Erasing non-volatile memory - block 2 of 2 [ #################### ] 0.000s | Erasing non-volatile memory - Erase successful [ #################### ] 11.071s | Erase file - Done erasing
[ ###### ] 0.000s | Program file - Checking image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 7.518s | Check image validity - block 1 of 3 [ ################ ] 2.820s | Check image validity - block 2 of 3 [ #################### ] 0.013s | Check image validity - Finished [ ############# ] 0.000s | Program file - Programming [ ###### ] 0.000s | Programming image - block 1 of 2 [ ############# ] 0.117s | Programming image - block 2 of 2 [ #################### ] 0.000s | Programming image - Write successful [ #################### ] 2.813s | Program file - Done programming
[ ###### ] 0.000s | Verify file - Check image [ #### ] 0.000s | Check image validity - Initialize device info [ ######## ] 0.000s | Check image validity - Check region 0 settings [ ############ ] 9.490s | Check image validity - block 1 of 3 [ ################ ] 3.561s | Check image validity - block 2 of 3 [ #################### ] 0.014s | Check image validity - Finished [ ############# ] 0.000s | Verify file - Verifying [ ###### ] 0.000s | Verifying image - block 1 of 2 [ ############# ] 0.119s | Verifying image - block 2 of 2 [ #################### ] 0.000s | Verifying image - Verify successful [ #################### ] 2.886s | Verify file - Done verifying
Enabling pin reset.
Applying pin reset.
-- runners.nrfjprog: Board with serial number 1050238934 flashed successfully.
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Generate config tp_v4_rak4630_nrf52840 for /Users/sh/dev/git/trailpulse-edge
Building trailpulse-edge
west build --build-dir /Users/sh/dev/git/trailpulse-edge/build_v4_debug_1 /Users/sh/dev/git/trailpulse-edge --pristine --board tp_v4_rak4630_nrf52840 -- -DNCS_TOOLCHAIN_VERSION=NONE -DCONFIG_DEBUG_OPTIMIZATIONS=y -DCONFIG_DEBUG_THREAD_INFO=y -DEXTRA_CONF_FILE=debug_prj.conf;boards/shields/simcom7022.conf -DEXTRA_DTC_OVERLAY_FILE=boards/shields/simcom7022.overlay -DBOARD_ROOT=/Users/sh/dev/git/trailpulse-edge
-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: /opt/nordic/ncs/toolchains/b8efef2ad5/opt/[email protected]/bin/python3.12 (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: /Users/sh/Library/Caches/zephyr
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: tp_v4_rak4630_nrf52840
Parsing /opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild/Kconfig
Loaded configuration '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/_sysbuild/empty.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/_sysbuild/empty.conf'
Configuration saved to '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/zephyr/.config'
Kconfig header saved to '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/_sysbuild/autoconf.h'
CMake Error at /opt/nordic/ncs/v2.9.0/nrf/sysbuild/CMakeLists.txt:117 (list):
list GET given empty list
Call Stack (most recent call first):
cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE)
cmake/modules/sysbuild_extensions.cmake:583 (cmake_language)
cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call)
cmake/modules/sysbuild_default.cmake:20 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
/opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
template/CMakeLists.txt:10 (find_package)
--
*************************************
* Running CMake for trailpulse-edge *
*************************************
Loading Zephyr default modules (Zephyr base).
-- Application: /Users/sh/dev/git/trailpulse-edge
-- CMake version: 3.21.0
-- Found Python3: /opt/nordic/ncs/toolchains/b8efef2ad5/bin/python (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: /Users/sh/Library/Caches/zephyr
-- Zephyr version: 3.7.99 (/opt/nordic/ncs/v2.9.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: tp_v4_rak4630_nrf52840
-- Found host-tools: zephyr 0.17.0 (/opt/nordic/ncs/toolchains/b8efef2ad5/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (/opt/nordic/ncs/toolchains/b8efef2ad5/opt/zephyr-sdk)
-- Found Dtc: /opt/nordic/ncs/toolchains/b8efef2ad5/bin/dtc (found suitable version "1.6.1", minimum required is "1.4.6")
-- Found BOARD.dts: /Users/sh/dev/git/trailpulse-edge/boards/arm/tp_v4_rak4630_nrf52840/tp_v4_rak4630_nrf52840.dts
-- Found devicetree overlay: boards/shields/simcom7022.overlay
-- Generated zephyr.dts: /Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/trailpulse-edge/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/trailpulse-edge/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/trailpulse-edge/zephyr/dts.cmake
warning: LOG_BUFFER_SIZE (defined at
/opt/nordic/ncs/v2.9.0/nrf/subsys/net/openthread/Kconfig.defconfig:51,
subsys/logging/Kconfig.processing:122) was assigned the value '4080' but got the value ''. Check
these unsatisfied dependencies: (NET_L2_OPENTHREAD || (LOG_MODE_DEFERRED && !LOG_FRONTEND_ONLY &&
!LOG_MODE_MINIMAL && LOG)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_LOG_BUFFER_SIZE and/or look up
LOG_BUFFER_SIZE in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: NCS_SAMPLE_MCUMGR_BT_OTA_DFU (defined at
/opt/nordic/ncs/v2.9.0/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig:9) was assigned the value 'y'
but got the value 'n'. Check these unsatisfied dependencies: BOOTLOADER_MCUBOOT (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU and/or look up
NCS_SAMPLE_MCUMGR_BT_OTA_DFU in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.
warning: MCUMGR_GRP_ZBASIC (defined at
/opt/nordic/ncs/v2.9.0/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig:63,
subsys/mgmt/mcumgr/grp/zephyr_basic/Kconfig:4) was assigned the value 'y' but got the value 'n'.
Check these unsatisfied dependencies: (((SETTINGS_FCB || SETTINGS_NVS) &&
NCS_SAMPLE_MCUMGR_BT_OTA_DFU) || MCUMGR) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_ZBASIC and/or look up
MCUMGR_GRP_ZBASIC in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: MCUMGR_GRP_ZBASIC_STORAGE_ERASE (defined at
/opt/nordic/ncs/v2.9.0/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig:66,
subsys/mgmt/mcumgr/grp/zephyr_basic/Kconfig:11) was assigned the value 'y' but got the value 'n'.
Check these unsatisfied dependencies: (((SETTINGS_FCB || SETTINGS_NVS) &&
NCS_SAMPLE_MCUMGR_BT_OTA_DFU) || (MCUMGR_GRP_ZBASIC && MCUMGR)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_ZBASIC_STORAGE_ERASE and/or look
up MCUMGR_GRP_ZBASIC_STORAGE_ERASE in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.
warning: RTT_CONSOLE (defined at drivers/console/Kconfig:130) was assigned the value 'y' but got the
value 'n'. Check these unsatisfied dependencies: CONSOLE (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_RTT_CONSOLE and/or look up RTT_CONSOLE in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: MCUMGR_GRP_FS (defined at subsys/mgmt/mcumgr/grp/fs_mgmt/Kconfig:15) was assigned the value
'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_FS and/or look up MCUMGR_GRP_FS
in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: MCUMGR_GRP_OS (defined at subsys/mgmt/mcumgr/grp/os_mgmt/Kconfig:15) was assigned the value
'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_OS and/or look up MCUMGR_GRP_OS
in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: MCUMGR_GRP_SHELL (defined at subsys/mgmt/mcumgr/grp/shell_mgmt/Kconfig:15) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_SHELL and/or look up
MCUMGR_GRP_SHELL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE (defined at subsys/mgmt/mcumgr/transport/Kconfig:15)
was assigned the value '8192' but got the value ''. Check these unsatisfied dependencies: MCUMGR
(=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE
and/or look up MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE in the menuconfig/guiconfig interface. The
Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices
sections of the manual might be helpful too.
warning: MCUMGR_TRANSPORT_BT (defined at subsys/mgmt/mcumgr/transport/Kconfig.bluetooth:12) was
assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_TRANSPORT_BT and/or look up
MCUMGR_TRANSPORT_BT in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.
warning: MCUMGR_TRANSPORT_BT_CONN_PARAM_CONTROL (defined at
subsys/mgmt/mcumgr/transport/Kconfig.bluetooth:47) was assigned the value 'y' but got the value 'n'.
Check these unsatisfied dependencies: MCUMGR_TRANSPORT_BT (=n), MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_TRANSPORT_BT_CONN_PARAM_CONTROL
and/or look up MCUMGR_TRANSPORT_BT_CONN_PARAM_CONTROL in the menuconfig/guiconfig interface. The
Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices
sections of the manual might be helpful too.
warning: SHELL_BACKEND_RTT_BUFFER (defined at subsys/shell/backends/Kconfig.backends:206) was
assigned the value '0' but got the value ''. Check these unsatisfied dependencies: SHELL_BACKEND_RTT
(=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_SHELL_BACKEND_RTT_BUFFER and/or
look up SHELL_BACKEND_RTT_BUFFER in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.
warning: Deprecated symbol PLATFORM_SPECIFIC_INIT is enabled.
warning: Deprecated symbol POSIX_CLOCK is enabled.
warning: Experimental symbol LORA is enabled.
warning: Experimental symbol MODEM_CONTEXT is enabled.
warning: Experimental symbol LORAWAN is enabled.
warning: Experimental symbol MODEM_MODULES is enabled.
/Users/sh/dev/git/trailpulse-edge/prj.conf:92: warning: attempt to assign the value 'n' to the undefined symbol MCUMGR_TRANSPORT_BT_AUTHEN
Parsing /Users/sh/dev/git/trailpulse-edge/Kconfig
Loaded configuration '/Users/sh/dev/git/trailpulse-edge/boards/arm/tp_v4_rak4630_nrf52840/tp_v4_rak4630_nrf52840_defconfig'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/prj.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/debug_prj.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/boards/shields/simcom7022.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/trailpulse-edge/zephyr/misc/generated/extra_kconfig_options.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/trailpulse-edge/zephyr/.config.sysbuild'
error: Aborting due to Kconfig warnings
CMake Error at /opt/nordic/ncs/v2.9.0/zephyr/cmake/modules/kconfig.cmake:396 (message):
command failed with return code: 1
Call Stack (most recent call first):
/opt/nordic/ncs/v2.9.0/nrf/cmake/modules/kconfig.cmake:29 (include)
/opt/nordic/ncs/v2.9.0/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
CMakeLists.txt:5 (find_package)
-- Configuring incomplete, errors occurred!
CMake Error at cmake/modules/sysbuild_extensions.cmake:514 (message):
CMake configure failed for Zephyr project: trailpulse-edge
Location: /Users/sh/dev/git/trailpulse-edge
Call Stack (most recent call first):
cmake/modules/sysbuild_images.cmake:20 (ExternalZephyrProject_Cmake)
cmake/modules/sysbuild_default.cmake:20 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
/opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
template/CMakeLists.txt:10 (find_package)
-- Configuring incomplete, errors occurred!
See also "/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1/CMakeFiles/CMakeOutput.log".
FATAL ERROR: command exited with status 1: /opt/nordic/ncs/toolchains/b8efef2ad5/bin/cmake -DWEST_PYTHON=/opt/nordic/ncs/toolchains/b8efef2ad5/opt/[email protected]/bin/python3.12 -B/Users/sh/dev/git/trailpulse-edge/build_v4_debug_1 -GNinja -DBOARD=tp_v4_rak4630_nrf52840 -DNCS_TOOLCHAIN_VERSION=NONE -DCONFIG_DEBUG_OPTIMIZATIONS=y -DCONFIG_DEBUG_THREAD_INFO=y '-DEXTRA_CONF_FILE=debug_prj.conf;boards/shields/simcom7022.conf' -DEXTRA_DTC_OVERLAY_FILE=boards/shields/simcom7022.overlay -DBOARD_ROOT=/Users/sh/dev/git/trailpulse-edge -S/opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild -DAPP_DIR:PATH=/Users/sh/dev/git/trailpulse-edge
* The terminal process terminated with exit code: 1.
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Generate config tp_v4_rak4630_nrf52840 for /Users/sh/dev/git/trailpulse-edge
Building trailpulse-edge
west build --build-dir /Users/sh/dev/git/trailpulse-edge/build_v4_debug_2 /Users/sh/dev/git/trailpulse-edge --pristine --board tp_v4_rak4630_nrf52840 -- -DNCS_TOOLCHAIN_VERSION=NONE -DEXTRA_CONF_FILE=debug_prj.conf;boards/shields/simcom7022.conf -DEXTRA_DTC_OVERLAY_FILE=boards/shields/simcom7022.overlay -DBOARD_ROOT=/Users/sh/dev/git/trailpulse-edge
-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: /opt/nordic/ncs/toolchains/b8efef2ad5/opt/[email protected]/bin/python3.12 (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: /Users/sh/Library/Caches/zephyr
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: tp_v4_rak4630_nrf52840
Parsing /opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild/Kconfig
Loaded configuration '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/_sysbuild/empty.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/_sysbuild/empty.conf'
Configuration saved to '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/zephyr/.config'
Kconfig header saved to '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/_sysbuild/autoconf.h'
CMake Error at /opt/nordic/ncs/v2.9.0/nrf/sysbuild/CMakeLists.txt:117 (list):
list GET given empty list
Call Stack (most recent call first):
cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE)
cmake/modules/sysbuild_extensions.cmake:583 (cmake_language)
cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call)
cmake/modules/sysbuild_default.cmake:20 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
/opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
template/CMakeLists.txt:10 (find_package)
--
*************************************
* Running CMake for trailpulse-edge *
*************************************
Loading Zephyr default modules (Zephyr base).
-- Application: /Users/sh/dev/git/trailpulse-edge
-- CMake version: 3.21.0
-- Found Python3: /opt/nordic/ncs/toolchains/b8efef2ad5/bin/python (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: /Users/sh/Library/Caches/zephyr
-- Zephyr version: 3.7.99 (/opt/nordic/ncs/v2.9.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: tp_v4_rak4630_nrf52840
-- Found host-tools: zephyr 0.17.0 (/opt/nordic/ncs/toolchains/b8efef2ad5/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (/opt/nordic/ncs/toolchains/b8efef2ad5/opt/zephyr-sdk)
-- Found Dtc: /opt/nordic/ncs/toolchains/b8efef2ad5/bin/dtc (found suitable version "1.6.1", minimum required is "1.4.6")
-- Found BOARD.dts: /Users/sh/dev/git/trailpulse-edge/boards/arm/tp_v4_rak4630_nrf52840/tp_v4_rak4630_nrf52840.dts
-- Found devicetree overlay: boards/shields/simcom7022.overlay
-- Generated zephyr.dts: /Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/trailpulse-edge/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/trailpulse-edge/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/trailpulse-edge/zephyr/dts.cmake
warning: NCS_SAMPLE_MCUMGR_BT_OTA_DFU (defined at
/opt/nordic/ncs/v2.9.0/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig:9) was assigned the value 'y'
but got the value 'n'. Check these unsatisfied dependencies: BOOTLOADER_MCUBOOT (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU and/or look up
NCS_SAMPLE_MCUMGR_BT_OTA_DFU in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.
warning: MCUMGR_GRP_ZBASIC (defined at
/opt/nordic/ncs/v2.9.0/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig:63,
subsys/mgmt/mcumgr/grp/zephyr_basic/Kconfig:4) was assigned the value 'y' but got the value 'n'.
Check these unsatisfied dependencies: (((SETTINGS_FCB || SETTINGS_NVS) &&
NCS_SAMPLE_MCUMGR_BT_OTA_DFU) || MCUMGR) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_ZBASIC and/or look up
MCUMGR_GRP_ZBASIC in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: MCUMGR_GRP_ZBASIC_STORAGE_ERASE (defined at
/opt/nordic/ncs/v2.9.0/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig:66,
subsys/mgmt/mcumgr/grp/zephyr_basic/Kconfig:11) was assigned the value 'y' but got the value 'n'.
Check these unsatisfied dependencies: (((SETTINGS_FCB || SETTINGS_NVS) &&
NCS_SAMPLE_MCUMGR_BT_OTA_DFU) || (MCUMGR_GRP_ZBASIC && MCUMGR)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_ZBASIC_STORAGE_ERASE and/or look
up MCUMGR_GRP_ZBASIC_STORAGE_ERASE in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.
warning: RTT_CONSOLE (defined at drivers/console/Kconfig:130) was assigned the value 'y' but got the
value 'n'. Check these unsatisfied dependencies: CONSOLE (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_RTT_CONSOLE and/or look up RTT_CONSOLE in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: MCUMGR_GRP_FS (defined at subsys/mgmt/mcumgr/grp/fs_mgmt/Kconfig:15) was assigned the value
'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_FS and/or look up MCUMGR_GRP_FS
in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: MCUMGR_GRP_OS (defined at subsys/mgmt/mcumgr/grp/os_mgmt/Kconfig:15) was assigned the value
'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_OS and/or look up MCUMGR_GRP_OS
in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: MCUMGR_GRP_SHELL (defined at subsys/mgmt/mcumgr/grp/shell_mgmt/Kconfig:15) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_GRP_SHELL and/or look up
MCUMGR_GRP_SHELL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE (defined at subsys/mgmt/mcumgr/transport/Kconfig:15)
was assigned the value '8192' but got the value ''. Check these unsatisfied dependencies: MCUMGR
(=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE
and/or look up MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE in the menuconfig/guiconfig interface. The
Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices
sections of the manual might be helpful too.
warning: MCUMGR_TRANSPORT_BT (defined at subsys/mgmt/mcumgr/transport/Kconfig.bluetooth:12) was
assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_TRANSPORT_BT and/or look up
MCUMGR_TRANSPORT_BT in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.
warning: MCUMGR_TRANSPORT_BT_CONN_PARAM_CONTROL (defined at
subsys/mgmt/mcumgr/transport/Kconfig.bluetooth:47) was assigned the value 'y' but got the value 'n'.
Check these unsatisfied dependencies: MCUMGR_TRANSPORT_BT (=n), MCUMGR (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUMGR_TRANSPORT_BT_CONN_PARAM_CONTROL
and/or look up MCUMGR_TRANSPORT_BT_CONN_PARAM_CONTROL in the menuconfig/guiconfig interface. The
Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices
sections of the manual might be helpful too.
warning: SHELL_BACKEND_RTT_BUFFER (defined at subsys/shell/backends/Kconfig.backends:206) was
assigned the value '0' but got the value ''. Check these unsatisfied dependencies: SHELL_BACKEND_RTT
(=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_SHELL_BACKEND_RTT_BUFFER and/or
look up SHELL_BACKEND_RTT_BUFFER in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.
warning: Deprecated symbol PLATFORM_SPECIFIC_INIT is enabled.
warning: Deprecated symbol POSIX_CLOCK is enabled.
warning: Experimental symbol LORA is enabled.
warning: Experimental symbol MODEM_CONTEXT is enabled.
warning: Experimental symbol LORAWAN is enabled.
warning: Experimental symbol MODEM_MODULES is enabled.
/Users/sh/dev/git/trailpulse-edge/prj.conf:92: warning: attempt to assign the value 'n' to the undefined symbol MCUMGR_TRANSPORT_BT_AUTHEN
Parsing /Users/sh/dev/git/trailpulse-edge/Kconfig
Loaded configuration '/Users/sh/dev/git/trailpulse-edge/boards/arm/tp_v4_rak4630_nrf52840/tp_v4_rak4630_nrf52840_defconfig'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/prj.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/debug_prj.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/boards/shields/simcom7022.conf'
Merged configuration '/Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/trailpulse-edge/zephyr/.config.sysbuild'
error: Aborting due to Kconfig warnings
CMake Error at /opt/nordic/ncs/v2.9.0/zephyr/cmake/modules/kconfig.cmake:396 (message):
command failed with return code: 1
Call Stack (most recent call first):
/opt/nordic/ncs/v2.9.0/nrf/cmake/modules/kconfig.cmake:29 (include)
/opt/nordic/ncs/v2.9.0/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
CMakeLists.txt:5 (find_package)
-- Configuring incomplete, errors occurred!
CMake Error at cmake/modules/sysbuild_extensions.cmake:514 (message):
CMake configure failed for Zephyr project: trailpulse-edge
Location: /Users/sh/dev/git/trailpulse-edge
Call Stack (most recent call first):
cmake/modules/sysbuild_images.cmake:20 (ExternalZephyrProject_Cmake)
cmake/modules/sysbuild_default.cmake:20 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
/opt/nordic/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
/opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
template/CMakeLists.txt:10 (find_package)
-- Configuring incomplete, errors occurred!
See also "/Users/sh/dev/git/trailpulse-edge/build_v4_debug_2/CMakeFiles/CMakeOutput.log".
FATAL ERROR: command exited with status 1: /opt/nordic/ncs/toolchains/b8efef2ad5/bin/cmake -DWEST_PYTHON=/opt/nordic/ncs/toolchains/b8efef2ad5/opt/[email protected]/bin/python3.12 -B/Users/sh/dev/git/trailpulse-edge/build_v4_debug_2 -GNinja -DBOARD=tp_v4_rak4630_nrf52840 -DNCS_TOOLCHAIN_VERSION=NONE '-DEXTRA_CONF_FILE=debug_prj.conf;boards/shields/simcom7022.conf' -DEXTRA_DTC_OVERLAY_FILE=boards/shields/simcom7022.overlay -DBOARD_ROOT=/Users/sh/dev/git/trailpulse-edge -S/opt/nordic/ncs/v2.9.0/zephyr/share/sysbuild -DAPP_DIR:PATH=/Users/sh/dev/git/trailpulse-edge
* The terminal process terminated with exit code: 1.
* Terminal will be reused by tasks, press any key to close it.
Hi,
You are gettin gmany warnings and errors due to configurations that are no longer valid. It makes sense to take them one by one, starting frrom the top. I would however start by ensuring that your project is properly migrated to sysbuild (see Migrating from multi-image builds to sysbuild). And regarding configs, one example woub be how to handle CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN, see this post.