Since I encountered some issues, I would like to confirm the differences between these two files once again.
Apart from debug messages, can prj.conf be used for the final product release?
Are there any other important considerations, such as BIN file encryption or similar matters?
Hi,
Since I encountered some issues, I would like to confirm the differences between these two files once again.
prj.conf is used by default. prj_release.conf is used if you use the FILE_SUFFIX "release". See Custom configurations.
Apart from debug messages, can prj.conf be used for the final product release?
prj_release.conf is just a way to show that your own project can use a separate file for release.
Are there any other important considerations, such as BIN file encryption or similar matters?
There are a lot of considerations, but most depend on your project requirements, so I can not give one solution that covers all scenarios.
Here are a couple of things that I think are a good idea to do:
1. Remember to add DFU so you can update your product in the field!
2. Properly test the device before releasing it!
3. Back up the build directory from your release build, sometimes you need this later.
4. Enable APPROTECT.
Regards,
Sigurd Hellesvik
Here are the things I originally wanted to confirm:
prj.conf be used for mass production?The APPROTECT feature you suggested seems to address the second issue. How can I enable APPROTECT?
SunHuang said:Canprj.confbe used for mass production?
While the answer here is thecnically "yes". This is not a relevant question to ask.
It is like asking "Can C be used for production?".
Kconfig(which uses prj.conf) just a concept we use to configure projects.
SunHuang said:Will it be vulnerable to malicious access or modification?
https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/security/ap_protect.html
Hi,
I have already added the following three configurations to prj.conf. However, nRF Connect can still read the data. Did I miss any steps?
CONFIG_NRF_SECURE_APPROTECT_LOCK=y CONFIG_NRF_SECURE_APPROTECT_USER_HANDLING=y CONFIG_NRF_SECURE_APPROTECT_USE_UICR=y
SunHuang said:Did I miss any steps?
Yes. You are to only set one of the configurations.
Hi,
I previously tried using only CONFIG_NRF_SECURE_APPROTECT_LOCK, but it did not disable the Flash read function. That’s why I attempted to enable all three configurations.
By the way, the SDK version I’m using is 2.9.0.
Hi,
I previously tried using only CONFIG_NRF_SECURE_APPROTECT_LOCK, but it did not disable the Flash read function. That’s why I attempted to enable all three configurations.
By the way, the SDK version I’m using is 2.9.0.
Try SB_CONFIG_APPROTECT_LOCK=y in sysbuild.conf
Hi,
I have previously tried using SB_CONFIG_APPROTECT_LOCK=y. Unfortunately, it resulted in a compilation error.
(v2.9.0) C:\nordic_prj\DL02_S2MB_KPD_Small> west build -p -b dl02_s2mb_kpd_small/nrf5340/cpuapp -- -DBOARD_ROOT=C:/nordic_prj/DL02_S2MB_KPD_Small -DCONF_FILE=prj.conf -- west build: making build dir C:\nordic_prj\DL02_S2MB_KPD_Small\build pristine -- west build: generating a build system Loading Zephyr module(s) (Zephyr base): sysbuild_default -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: dl02_s2mb_kpd_small, qualifiers: nrf5340/cpuapp Parsing C:/nordic_prj/DL02_S2MB_KPD_Small/Kconfig.sysbuild Loaded configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/_sysbuild/empty.conf' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/sysbuild.conf' Configuration saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/zephyr/.config' Kconfig header saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/_sysbuild/autoconf.h' CMake Error at C:/ncs/v2.9.0/nrf/sysbuild/CMakeLists.txt:617 (set_config_bool): set_config_bool Function invoked with incorrect arguments for function named: set_config_bool Call Stack (most recent call first): cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE) cmake/modules/sysbuild_extensions.cmake:583 (cmake_language) cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call) cmake/modules/sysbuild_default.cmake:20 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate) C:/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include) template/CMakeLists.txt:10 (find_package) CMake Error at C:/ncs/v2.9.0/nrf/sysbuild/CMakeLists.txt:617 (set_config_bool): set_config_bool Function invoked with incorrect arguments for function named: set_config_bool Call Stack (most recent call first): cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE) cmake/modules/sysbuild_extensions.cmake:583 (cmake_language) cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call) cmake/modules/sysbuild_default.cmake:20 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate) C:/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include) template/CMakeLists.txt:10 (find_package) CMake Error at C:/ncs/v2.9.0/nrf/sysbuild/CMakeLists.txt:617 (set_config_bool): set_config_bool Function invoked with incorrect arguments for function named: set_config_bool Call Stack (most recent call first): cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE) cmake/modules/sysbuild_extensions.cmake:583 (cmake_language) cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call) cmake/modules/sysbuild_default.cmake:20 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate) C:/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include) template/CMakeLists.txt:10 (find_package) CMake Error at C:/ncs/v2.9.0/nrf/sysbuild/CMakeLists.txt:617 (set_config_bool): set_config_bool Function invoked with incorrect arguments for function named: set_config_bool Call Stack (most recent call first): cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE) cmake/modules/sysbuild_extensions.cmake:583 (cmake_language) cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call) cmake/modules/sysbuild_default.cmake:20 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include) C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate) C:/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include) template/CMakeLists.txt:10 (find_package) -- ***************************** * Running CMake for mcuboot * ***************************** Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/v2.9.0/bootloader/mcuboot/boot/zephyr -- CMake version: 3.21.0 -- Using NCS Toolchain 2.8.20241119.782234748775 for building. (C:/ncs/toolchains/b620d30767/cmake) -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: dl02_s2mb_kpd_small, qualifiers: nrf5340/cpuapp -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpuapp.dts -- Found devicetree overlay: C:/nordic_prj/DL02_S2MB_KPD_Small/sysbuild/mcuboot/boards/dl02_s2mb_kpd_small_nrf5340_cpuapp.overlay -- Found devicetree overlay: C:/ncs/v2.9.0/nrf/modules/mcuboot/flash_sim.overlay 'label' is marked as deprecated in 'properties:' in C:/ncs/v2.9.0/zephyr/dts/bindings\mtd\jedec,spi-nor.yaml for node /soc/peripheral@50000000/spi@c000/mx25r6435f@0. node '/soc/peripheral@50000000/i2c@9000/outside@5B' compatible 'sunion,outside' has unknown vendor prefix 'sunion' node '/soc/peripheral@50000000/i2c@9000/store@50' compatible 'sunion,eeprom' has unknown vendor prefix 'sunion' node '/soc/peripheral@50000000/i2c@9000/timer@32' compatible 'sunion,rtc' has unknown vendor prefix 'sunion' -- Generated zephyr.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/build/mcuboot/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/nordic_prj/DL02_S2MB_KPD_Small/build/mcuboot/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/nordic_prj/DL02_S2MB_KPD_Small/build/mcuboot/zephyr/dts.cmake warning: Experimental symbol ISR_TABLES_LOCAL_DECLARATION is enabled. Parsing C:/ncs/v2.9.0/bootloader/mcuboot/boot/zephyr/Kconfig Loaded configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpuapp_defconfig' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/sysbuild/mcuboot/prj.conf' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/sysbuild/mcuboot/boards/dl02_s2mb_kpd_small_nrf5340_cpuapp.conf' Merged configuration 'C:/ncs/v2.9.0/nrf/subsys/partition_manager/ext_flash_mcuboot_secondary.conf' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/mcuboot/zephyr/.config.sysbuild' Configuration saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/mcuboot/zephyr/.config' Kconfig header saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/mcuboot/zephyr/include/generated/zephyr/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe -- Setting build type to 'MinSizeRel' as none was specified. MCUBoot bootloader key file: C:/ncs/v2.9.0/bootloader/mcuboot/root-ec-p256.pem MCUBoot bootloader encryption key file: C:/nordic_prj/DL02_S2MB_KPD_Small/custom_key_dir/encryption_key.pem -- Configuring done -- Generating done -- Build files have been written to: C:/nordic_prj/DL02_S2MB_KPD_Small/build/mcuboot -- ******************************* * Running CMake for ipc_radio * ******************************* Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/v2.9.0/nrf/applications/ipc_radio -- CMake version: 3.21.0 -- Using NCS Toolchain 2.8.20241119.782234748775 for building. (C:/ncs/toolchains/b620d30767/cmake) -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: dl02_s2mb_kpd_small, qualifiers: nrf5340/cpunet -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpunet.dts -- Generated zephyr.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/build/ipc_radio/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/nordic_prj/DL02_S2MB_KPD_Small/build/ipc_radio/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/nordic_prj/DL02_S2MB_KPD_Small/build/ipc_radio/zephyr/dts.cmake Parsing C:/ncs/v2.9.0/nrf/applications/ipc_radio/Kconfig Loaded configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpunet_defconfig' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/sysbuild/ipc_radio/prj.conf' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/sysbuild/ipc_radio/boards/dl02_s2mb_kpd_small_nrf5340_cpunet.conf' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/ipc_radio/overlay-bt_hci_ipc.conf' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/ipc_radio/overlay-802154.conf' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/ipc_radio/zephyr/.config.sysbuild' Configuration saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/ipc_radio/zephyr/.config' Kconfig header saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/ipc_radio/zephyr/include/generated/zephyr/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe -- libmetal version: 1.6.0 (C:/ncs/v2.9.0/nrf/applications/ipc_radio) -- Build type: -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- Looking for include file stdatomic.h -- Looking for include file stdatomic.h - found -- open-amp version: 1.6.1 (C:/ncs/v2.9.0/modules/lib/open-amp/open-amp) -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- C_FLAGS : -Wall -Wextra -- Looking for include file fcntl.h -- Looking for include file fcntl.h - found -- Setting build type to 'MinSizeRel' as none was specified. CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:952 (message): No SOURCES given to Zephyr library: drivers__console Excluding target from build. CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:952 (message): No SOURCES given to Zephyr library: drivers__gpio Excluding target from build. CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:2133 (message): __ASSERT() statements are globally ENABLED -- Configuring done -- Generating done -- Build files have been written to: C:/nordic_prj/DL02_S2MB_KPD_Small/build/ipc_radio -- ************************* * Running CMake for b0n * ************************* Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/v2.9.0/nrf/samples/nrf5340/netboot -- CMake version: 3.21.0 -- Using NCS Toolchain 2.8.20241119.782234748775 for building. (C:/ncs/toolchains/b620d30767/cmake) -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: dl02_s2mb_kpd_small, qualifiers: nrf5340/cpunet -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpunet.dts -- Generated zephyr.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/build/b0n/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/nordic_prj/DL02_S2MB_KPD_Small/build/b0n/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/nordic_prj/DL02_S2MB_KPD_Small/build/b0n/zephyr/dts.cmake warning: UART_CONSOLE (defined at drivers/console/Kconfig:42) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: SERIAL_HAS_DRIVER (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_CONSOLE and/or look up UART_CONSOLE in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. Parsing C:/ncs/v2.9.0/nrf/samples/nrf5340/netboot/Kconfig Loaded configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpunet_defconfig' Merged configuration 'C:/ncs/v2.9.0/nrf/samples/nrf5340/netboot/prj.conf' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/b0n/zephyr/.config.sysbuild' Configuration saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/b0n/zephyr/.config' Kconfig header saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/b0n/zephyr/include/generated/zephyr/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe -- Setting build type to 'MinSizeRel' as none was specified. CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:952 (message): No SOURCES given to Zephyr library: drivers__console Excluding target from build. CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:952 (message): No SOURCES given to Zephyr library: drivers__serial Excluding target from build. CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:2133 (message): __ASSERT() statements are globally ENABLED -- Configuring done -- Generating done -- Build files have been written to: C:/nordic_prj/DL02_S2MB_KPD_Small/build/b0n -- ***************************************** * Running CMake for DL02_S2MB_KPD_Small * ***************************************** Loading Zephyr default modules (Zephyr base). -- Application: C:/nordic_prj/DL02_S2MB_KPD_Small -- CMake version: 3.21.0 -- Using NCS Toolchain 2.8.20241119.782234748775 for building. (C:/ncs/toolchains/b620d30767/cmake) -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: dl02_s2mb_kpd_small, qualifiers: nrf5340/cpuapp -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpuapp.dts -- Found devicetree overlay: C:/nordic_prj/DL02_S2MB_KPD_Small/boards/dl02_s2mb_kpd_small_nrf5340_cpuapp.overlay 'label' is marked as deprecated in 'properties:' in C:/ncs/v2.9.0/zephyr/dts/bindings\mtd\jedec,spi-nor.yaml for node /soc/peripheral@50000000/spi@c000/mx25r6435f@0. node '/soc/peripheral@50000000/i2c@9000/outside@5B' compatible 'sunion,outside' has unknown vendor prefix 'sunion' node '/soc/peripheral@50000000/i2c@9000/store@50' compatible 'sunion,eeprom' has unknown vendor prefix 'sunion' node '/soc/peripheral@50000000/i2c@9000/timer@32' compatible 'sunion,rtc' has unknown vendor prefix 'sunion' -- Generated zephyr.dts: C:/nordic_prj/DL02_S2MB_KPD_Small/build/DL02_S2MB_KPD_Small/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/nordic_prj/DL02_S2MB_KPD_Small/build/DL02_S2MB_KPD_Small/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/nordic_prj/DL02_S2MB_KPD_Small/build/DL02_S2MB_KPD_Small/zephyr/dts.cmake warning: Deprecated symbol MBEDTLS_LEGACY_CRYPTO_C is enabled. warning: Deprecated symbol NET_SOCKETS_POSIX_NAMES is enabled. warning: Experimental symbol GPIO_ENABLE_DISABLE_INTERRUPT is enabled. Parsing C:/nordic_prj/DL02_S2MB_KPD_Small/Kconfig Loaded configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/boards/sunion/dl02_s2mb_kpd_small/dl02_s2mb_kpd_small_nrf5340_cpuapp_defconfig' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/prj.conf' Merged configuration 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/DL02_S2MB_KPD_Small/zephyr/.config.sysbuild' Configuration saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/DL02_S2MB_KPD_Small/zephyr/.config' Kconfig header saved to 'C:/nordic_prj/DL02_S2MB_KPD_Small/build/DL02_S2MB_KPD_Small/zephyr/include/generated/zephyr/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe =========== Generating psa_crypto_config =============== Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Backup: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False Backup: CONFIG_MBEDTLS_THREADING: False Backup: CONFIG_MBEDTLS_THREADING_ALT: True =========== Checkpoint: backup =============== Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Restore: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False Restore: CONFIG_MBEDTLS_THREADING: False Restore: CONFIG_MBEDTLS_THREADING_ALT: True =========== End psa_crypto_config =============== =========== Generating psa_crypto_library_config =============== Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Backup: CONFIG_MBEDTLS_USE_PSA_CRYPTO: False Backup: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False Backup: CONFIG_MBEDTLS_THREADING: False Backup: CONFIG_MBEDTLS_THREADING_ALT: True =========== Checkpoint: backup =============== Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Restore: CONFIG_MBEDTLS_USE_PSA_CRYPTO: False Restore: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False Restore: CONFIG_MBEDTLS_THREADING: False Restore: CONFIG_MBEDTLS_THREADING_ALT: True =========== End psa_crypto_library_config =============== ################### OPENTHREAD REPORT ################### + Target device: nrf5340 + Thread version: v1.4 + OpenThread library feature set: Minimal Thread Device (MTD) + Thread device type: Sleepy End Device (SED) + OpenThread Library: openthread/lib/nrf5340_cpuapp/soft-float/v1.4/mtd/ + OpenThread NCS revision: ncs-thread-reference-20241002 + OpenThread NCS SHA: ee86dc26d + NCS revision: v2.9.0 + NCS SHA: 7787b26498 + No differences in the used Thread library in comparison to the NCS v2.8.0 release. ################### END ################### -- libmetal version: 1.6.0 (C:/nordic_prj/DL02_S2MB_KPD_Small) -- Build type: -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- Looking for include file stdatomic.h -- Looking for include file stdatomic.h - found -- open-amp version: 1.6.1 (C:/ncs/v2.9.0/modules/lib/open-amp/open-amp) -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- C_FLAGS : -Wall -Wextra -- Looking for include file fcntl.h -- Looking for include file fcntl.h - found -- Setting build type to 'MinSizeRel' as none was specified. CMake Warning at C:/ncs/v2.9.0/nrfxlib/openthread/cmake/extensions.cmake:123 (message): CONFIG_MBEDTLS_ASN1_PARSE_C=y is required by the precompiled OpenThread libraries, but it has been configured differently in the current build. The minimal crypto configuration is stored under "Crypto configuration" section at: C:/ncs/v2.9.0/nrfxlib/openthread/lib/nrf5340_cpuapp/soft-float/v1.4/mtd//openthread_lib_configuration.txt Call Stack (most recent call first): C:/ncs/v2.9.0/nrfxlib/openthread/CMakeLists.txt:79 (check_openthread_dependencies) CMake Warning at C:/ncs/v2.9.0/nrfxlib/openthread/cmake/extensions.cmake:123 (message): CONFIG_MBEDTLS_ASN1_WRITE_C=y is required by the precompiled OpenThread libraries, but it has been configured differently in the current build. The minimal crypto configuration is stored under "Crypto configuration" section at: C:/ncs/v2.9.0/nrfxlib/openthread/lib/nrf5340_cpuapp/soft-float/v1.4/mtd//openthread_lib_configuration.txt Call Stack (most recent call first): C:/ncs/v2.9.0/nrfxlib/openthread/CMakeLists.txt:79 (check_openthread_dependencies) CMake Warning at C:/ncs/v2.9.0/nrfxlib/openthread/cmake/extensions.cmake:123 (message): CONFIG_MBEDTLS_USE_PSA_CRYPTO=y is required by the precompiled OpenThread libraries, but it has been configured differently in the current build. The minimal crypto configuration is stored under "Crypto configuration" section at: C:/ncs/v2.9.0/nrfxlib/openthread/lib/nrf5340_cpuapp/soft-float/v1.4/mtd//openthread_lib_configuration.txt Call Stack (most recent call first): C:/ncs/v2.9.0/nrfxlib/openthread/CMakeLists.txt:79 (check_openthread_dependencies) -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found version "3.12.4") found components: Interpreter -- Including signing script: C:/ncs/v2.9.0/nrf/cmake/sysbuild/image_signing.cmake CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:2133 (message): __ASSERT() statements are globally ENABLED -- Configuring done -- Generating done -- Build files have been written to: C:/nordic_prj/DL02_S2MB_KPD_Small/build/DL02_S2MB_KPD_Small -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found version "3.12.4") found components: Interpreter -- Found partition manager static configuration : C:/nordic_prj/DL02_S2MB_KPD_Small/pm_static_dl02_s2mb_kpd_small_nrf5340_cpuapp.yml Partition 'mcuboot' is not included in the dynamic resolving since it is statically defined. Partition 'mcuboot_pad' is not included in the dynamic resolving since it is statically defined. Partition 'mcuboot_primary' is not included in the dynamic resolving since it is statically defined. Partition 'mcuboot_primary_app' is not included in the dynamic resolving since it is statically defined. Partition 'settings_storage' is not included in the dynamic resolving since it is statically defined. Partition 'mcuboot_primary_1' is not included in the dynamic resolving since it is statically defined. Partition 'mcuboot_secondary' is not included in the dynamic resolving since it is statically defined. Partition 'mcuboot_secondary_1' is not included in the dynamic resolving since it is statically defined. Partition 'pcd_sram' is not included in the dynamic resolving since it is statically defined. Dropping partition 'hw_unique_key_partition' since its size is 0. -- Configuring incomplete, errors occurred! See also "C:/nordic_prj/DL02_S2MB_KPD_Small/build/CMakeFiles/CMakeOutput.log". [91mFATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\b620d30767\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/b620d30767/opt/bin/python.exe '-BC:\nordic_prj\DL02_S2MB_KPD_Small\build' -GNinja -DBOARD=dl02_s2mb_kpd_small/nrf5340/cpuapp -DBOARD_ROOT=C:/nordic_prj/DL02_S2MB_KPD_Small -DCONF_FILE=prj.conf '-SC:\ncs\v2.9.0\zephyr\share\sysbuild' '-DAPP_DIR:PATH=C:\nordic_prj\DL02_S2MB_KPD_Small'
Also set SB_CONFIG_SECURE_APPROTECT_LOCK=y.
The errors is a bug of some sort: It should return a warning or something instead. I will report it internally
Hi,
Thanks for your help, it works fine
