Hello everyone,
I'm using the ble_app_uart example code in my MDBT50Q-U512k. I have been made some modifications according to my application. I need use fixed value pin to pairing my device with my smartphone, but I can't do it because the modifications that I'm trying to use, generate random PIN. I need use 555555 PIN value to pairing... Below here is my code:
/**
* Copyright (c) 2014 - 2021, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/** @file
*
* @defgroup ble_sdk_uart_over_ble_main main.c
* @{
* @ingroup ble_sdk_app_nus_eval
* @brief UART over BLE application main file.
*
* This file contains the source code for a sample application that uses the Nordic UART service.
* This application uses the @ref srvlib_conn_params module.
*/
#include <stdint.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf.h"
#include "ble_hci.h"
#include "ble_advdata.h"
#include "ble_advertising.h"
#include "ble_conn_params.h"
#include "ble_hids.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "nrf_ble_gatt.h"
#include "nrf_ble_qwr.h"
#include "app_timer.h"
#include "ble_nus.h"
#include "ble_dis.h"
#include "app_uart.h"
#include "app_util_platform.h"
#include "bsp_btn_ble.h"
#include "nrf_pwr_mgmt.h"
#include "nrf_drv_wdt.h"
#include "nrfx_wdt.h"
#include "app_error.h"
//#include "nrf_drv_wdt.h"
#if defined (UART_PRESENT)
#include "nrf_uart.h"
#endif
#if defined (UARTE_PRESENT)
#include "nrf_uarte.h"
#endif
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
#define APP_BLE_CONN_CFG_TAG 1 /**< A tag identifying the SoftDevice BLE configuration. */
#define MANUFACTURER_NAME "Nordic"
#define DEVICE_NAME "Nordic_UART" /**< Name of device. Will be included in the advertising data. */
#define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN /**< UUID type for the Nordic UART Service (vendor specific). */
#define APP_BLE_OBSERVER_PRIO 3 /**< Application's BLE observer priority. You shouldn't need to modify this value. */
#define APP_ADV_INTERVAL 64 /**< The advertising interval (in units of 0.625 ms. This value corresponds to 40 ms). */
#define APP_ADV_DURATION 0 /**< The advertising duration (180 seconds) in units of 10 milliseconds. */
#define MIN_CONN_INTERVAL MSEC_TO_UNITS(20, UNIT_1_25_MS) /**< Minimum acceptable connection interval (20 ms), Connection interval uses 1.25 ms units. */
#define MAX_CONN_INTERVAL MSEC_TO_UNITS(75, UNIT_1_25_MS) /**< Maximum acceptable connection interval (75 ms), Connection interval uses 1.25 ms units. */
#define SLAVE_LATENCY 0 /**< Slave latency. */
#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(10000, UNIT_10_MS) /**< Connection supervisory timeout (10 seconds), Supervision Timeout uses 10 ms units. */
#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */
#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */
#define MAX_CONN_PARAMS_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */
#define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */
#define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE 256 /**< UART RX buffer size. */
#define PINO_TX NRF_GPIO_PIN_MAP(1,5)
#define PINO_RX NRF_GPIO_PIN_MAP(0,19)
BLE_HIDS_DEF(m_hids, NRF_SDH_BLE_PERIPHERAL_LINK_COUNT,
0, // No Input Reports
0, // No Output Reports
0 // No Feature Reports
);
BLE_NUS_DEF(m_nus, NRF_SDH_BLE_TOTAL_LINK_COUNT); /**< BLE NUS service instance. */
NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */
NRF_BLE_QWR_DEF(m_qwr); /**< Context for the Queued Write module.*/
BLE_ADVERTISING_DEF(m_advertising); /**< Advertising module instance. */
// Declarar buffers estáticos para as chaves
static ble_gap_enc_key_t m_enc_key_own;
static ble_gap_id_key_t m_id_key_own;
static ble_gap_enc_key_t m_enc_key_peer;
static ble_gap_id_key_t m_id_key_peer;
//uint8_t passkey[] = "012345"; // 4 dígitos + dois zeros, se preferir
static ble_gap_sec_keyset_t m_sec_keyset;
static ble_gap_sec_params_t m_sec_params;
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */
static uint16_t m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - 3; /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */
static ble_uuid_t m_adv_uuids[] = /**< Universally unique service identifier. */
{
{BLE_UUID_NUS_SERVICE, NUS_SERVICE_UUID_TYPE},
{BLE_UUID_HUMAN_INTERFACE_DEVICE_SERVICE, BLE_UUID_TYPE_BLE}
};
/**@brief Function for assert macro callback.
*
* @details This function will be called in case of an assert in the SoftDevice.
*
* @warning This handler is an example only and does not fit a final product. You need to analyse
* how your product is supposed to react in case of Assert.
* @warning On assert from the SoftDevice, the system can only recover on reset.
*
* @param[in] line_num Line number of the failing ASSERT call.
* @param[in] p_file_name File name of the failing ASSERT call.
*/
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
app_error_handler(DEAD_BEEF, line_num, p_file_name);
}
/**@brief Function for initializing the timer module.
*/
static void timers_init(void)
{
ret_code_t err_code = app_timer_init();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for the GAP initialization.
*
* @details This function will set up all the necessary GAP (Generic Access Profile) parameters of
* the device. It also sets the permissions and appearance.
*/
static void gap_params_init(void)
{
uint32_t err_code;
ble_gap_conn_params_t gap_conn_params;
ble_gap_conn_sec_mode_t sec_mode;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
err_code = sd_ble_gap_device_name_set(&sec_mode,
(const uint8_t *) DEVICE_NAME,
strlen(DEVICE_NAME));
APP_ERROR_CHECK(err_code);
err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_HID);
APP_ERROR_CHECK(err_code);
memset(&gap_conn_params, 0, sizeof(gap_conn_params));
gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
gap_conn_params.slave_latency = SLAVE_LATENCY;
gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT;
err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling Queued Write Module errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void nrf_qwr_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for handling the data from the Nordic UART Service.
*
* @details This function will process the data received from the Nordic UART BLE Service and send
* it to the UART module.
*
* @param[in] p_evt Nordic UART Service event.
*/
/**@snippet [Handling the data received over BLE] */
static void nus_data_handler(ble_nus_evt_t * p_evt)
{
if (p_evt->type == BLE_NUS_EVT_COMM_STARTED)
{
printf("NUS COMM_STARTED: notificações ativadas!\n");
const char msg[] = "Dispositivo pareado com sucesso!\r\n";
uint16_t len = strlen(msg);
uint32_t err_code = ble_nus_data_send(&m_nus, (uint8_t*)msg, &len, m_conn_handle);
if (err_code != NRF_SUCCESS)
{
printf("Erro ao enviar após COMM_STARTED: 0x%X\n", err_code);
}
}
if (p_evt->type == BLE_NUS_EVT_RX_DATA)
{
uint32_t err_code;
NRF_LOG_DEBUG("Received data from BLE NUS. Writing data on UART.");
NRF_LOG_HEXDUMP_DEBUG(p_evt->params.rx_data.p_data, p_evt->params.rx_data.length);
for (uint32_t i = 0; i < p_evt->params.rx_data.length; i++)
{
do
{
err_code = app_uart_put(p_evt->params.rx_data.p_data[i]);
if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_BUSY))
{
NRF_LOG_ERROR("Failed receiving NUS message. Error 0x%x. ", err_code);
APP_ERROR_CHECK(err_code);
}
} while (err_code == NRF_ERROR_BUSY);
}
if (p_evt->params.rx_data.p_data[p_evt->params.rx_data.length - 1] == '\r')
{
while (app_uart_put('\n') == NRF_ERROR_BUSY);
}
}
}
/**@snippet [Handling the data received over BLE] */
// Adicione esta nova função em algum lugar do seu main.c
// Substitua a sua função hids_init por esta versão corrigida
static void hids_init(void)
{
ret_code_t err_code;
ble_hids_init_t hids_init_obj;
uint8_t hid_info_flags = HID_INFO_FLAG_REMOTE_WAKE_MSK | HID_INFO_FLAG_NORMALLY_CONNECTABLE_MSK;
memset(&hids_init_obj, 0, sizeof(hids_init_obj));
hids_init_obj.evt_handler = NULL;
hids_init_obj.error_handler = NULL;
hids_init_obj.is_kb = false;
hids_init_obj.is_mouse = false;
// CONFIGURAÇÃO DE SEGURANÇA CORRETA PARA SDKs MAIS NOVOS
// Define a permissão para a característica "HID Information"
//BLE_GAP_CONN_SEC_MODE_SET_OPEN(&hids_init_obj.hid_info_attr_perm);
hids_init_obj.hid_information.bcd_hid = 0x0111; // Versão 1.11
hids_init_obj.hid_information.b_country_code = 0;
hids_init_obj.hid_information.flags = hid_info_flags;
// Como não temos reports (teclas, etc), deixamos os contadores em 0
hids_init_obj.inp_rep_count = 0;
hids_init_obj.p_inp_rep_array = NULL;
hids_init_obj.outp_rep_count = 0;
hids_init_obj.p_outp_rep_array = NULL;
hids_init_obj.feature_rep_count = 0;
hids_init_obj.p_feature_rep_array = NULL;
/*
* AS LINHAS ABAIXO CAUSARAM O ERRO E FORAM REMOVIDAS,
* POIS 'rep_char_attr' NÃO EXISTE MAIS NESTA STRUCT.
*
* hids_init_obj.rep_char_attr.read_perm = SEC_OPEN;
* hids_init_obj.rep_char_attr.write_perm = SEC_OPEN;
* hids_init_obj.rep_char_attr.cccd_write_perm = SEC_OPEN;
*/
err_code = ble_hids_init(&m_hids, &hids_init_obj);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing services that will be used by the application.
*/
static void services_init(void)
{
uint32_t err_code;
ble_nus_init_t nus_init;
nrf_ble_qwr_init_t qwr_init = {0};
// Initialize Queued Write Module.
qwr_init.error_handler = nrf_qwr_error_handler;
err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init);
APP_ERROR_CHECK(err_code);
// Initialize NUS.
memset(&nus_init, 0, sizeof(nus_init));
nus_init.data_handler = nus_data_handler;
err_code = ble_nus_init(&m_nus, &nus_init);
APP_ERROR_CHECK(err_code);
hids_init();
}
/**@brief Function for handling an event from the Connection Parameters Module.
*
* @details This function will be called for all events in the Connection Parameters Module
* which are passed to the application.
*
* @note All this function does is to disconnect. This could have been done by simply setting
* the disconnect_on_fail config parameter, but instead we use the event handler
* mechanism to demonstrate its use.
*
* @param[in] p_evt Event received from the Connection Parameters Module.
*/
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
uint32_t err_code;
if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
{
err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
APP_ERROR_CHECK(err_code);
}
}
/**@brief Function for handling errors from the Connection Parameters module.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void conn_params_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
/**@brief Function for initializing the Connection Parameters module.
*/
static void conn_params_init(void)
{
uint32_t err_code;
ble_conn_params_init_t cp_init;
memset(&cp_init, 0, sizeof(cp_init));
cp_init.p_conn_params = NULL;
cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY;
cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT;
cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID;
cp_init.disconnect_on_fail = false;
cp_init.evt_handler = on_conn_params_evt;
cp_init.error_handler = conn_params_error_handler;
err_code = ble_conn_params_init(&cp_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for putting the chip into sleep mode.
*
* @note This function will not return.
*/
static void sleep_mode_enter(void)
{
uint32_t err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
// Prepare wakeup buttons.
err_code = bsp_btn_ble_sleep_mode_prepare();
APP_ERROR_CHECK(err_code);
// Go to system-off mode (this function will not return; wakeup will cause a reset).
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling advertising events.
*
* @details This function will be called for advertising events which are passed to the application.
*
* @param[in] ble_adv_evt Advertising event.
*/
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
uint32_t err_code;
switch (ble_adv_evt)
{
case BLE_ADV_EVT_FAST:
err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
APP_ERROR_CHECK(err_code);
break;
case BLE_ADV_EVT_IDLE:
//sleep_mode_enter();
break;
default:
break;
}
}
/**@brief Function for handling BLE events.
*
* @param[in] p_ble_evt Bluetooth stack event.
* @param[in] p_context Unused.
*/
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
printf("Bluetooth Conectado\n");
err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
APP_ERROR_CHECK(err_code);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
APP_ERROR_CHECK(err_code);
//err_code = sd_ble_gap_authenticate(m_conn_handle, &m_sec_params);
//APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_DISCONNECTED:
printf("Bluetooth Desconectado\n");
m_conn_handle = BLE_CONN_HANDLE_INVALID;
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
printf("Respondendo BLE_GAP_EVT_SEC_PARAMS_REQUEST\n");
// Preencha os ponteiros do keyset corretamente
memset(&m_sec_keyset, 0, sizeof(m_sec_keyset));
m_sec_keyset.keys_own.p_enc_key = &m_enc_key_own;
m_sec_keyset.keys_own.p_id_key = &m_id_key_own;
m_sec_keyset.keys_peer.p_enc_key = &m_enc_key_peer;
m_sec_keyset.keys_peer.p_id_key = &m_id_key_peer;
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params,
&m_sec_keyset);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_AUTH_KEY_REQUEST:
{
uint8_t passkey[6] = {'5', '5', '5', '5', '5', '5'}; // BLE espera 6 caracteres
printf("Enviando PIN para pareamento...\n");
err_code = sd_ble_gap_auth_key_reply(
p_ble_evt->evt.gap_evt.conn_handle,
BLE_GAP_AUTH_KEY_TYPE_PASSKEY,
passkey
);
APP_ERROR_CHECK(err_code);
}
break;
case BLE_GAP_EVT_PASSKEY_DISPLAY:
//{
//char passkey_str[7];
//memcpy(passkey_str, p_ble_evt->evt.gap_evt.params.passkey_display.passkey, 6);
//passkey_str[6] = '\0'; // termina a string
//printf("PIN para pareamento: %s\n", passkey_str);
////printf("PIN para pareamento: %06u\n", p_ble_evt->evt.gap_evt.params.passkey_display.passkey);}
//}
break;
case BLE_GAP_EVT_AUTH_STATUS:
{
const ble_gap_evt_auth_status_t * auth_status = &p_ble_evt->evt.gap_evt.params.auth_status;
printf("Auth status: 0x%02X\n", auth_status->auth_status);
printf("Bonded: %d\n", auth_status->bonded);
//if (auth_status->auth_status == BLE_GAP_SEC_STATUS_SUCCESS)
//{
// const char msg[] = "Pareamento concluído com sucesso!\r\n";
// uint16_t len = strlen(msg);
// err_code = ble_nus_data_send(&m_nus, (uint8_t*)msg, &len, m_conn_handle);
// if (err_code != NRF_SUCCESS)
// {
// printf("Erro ao enviar notificação: 0x%X\n", err_code);
// }
//}
}break;
//{
// const ble_gap_evt_auth_status_t * auth_status = &p_ble_evt->evt.gap_evt.params.auth_status;
// printf("Auth status: 0x%02X\n", auth_status->auth_status);
// printf("Bonded: %d\n", auth_status->bonded);
//} break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
APP_ERROR_CHECK(err_code);
// Agora sim, inicie o pareamento aqui
//ble_gap_sec_params_t sec_params = m_sec_params;
//err_code = sd_ble_gap_authenticate(m_conn_handle, &sec_params);
//APP_ERROR_CHECK(err_code);
break;
//case BLE_GATTS_EVT_SYS_ATTR_MISSING:
// err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
// APP_ERROR_CHECK(err_code);
// break;
default:
break;
}
}
/**@brief Function for the SoftDevice initialization.
*
* @details This function initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
ret_code_t err_code;
err_code = nrf_sdh_enable_request();
APP_ERROR_CHECK(err_code);
// Configure the BLE stack using the default settings.
// Fetch the start address of the application RAM.
uint32_t ram_start = 0;
err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
APP_ERROR_CHECK(err_code);
// Enable BLE stack.
err_code = nrf_sdh_ble_enable(&ram_start);
APP_ERROR_CHECK(err_code);
// Register a handler for BLE events.
NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}
/**@brief Function for handling events from the GATT library. */
void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
if ((m_conn_handle == p_evt->conn_handle) && (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED))
{
m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
NRF_LOG_INFO("Data len is set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
}
NRF_LOG_DEBUG("ATT MTU exchange completed. central 0x%x peripheral 0x%x",
p_gatt->att_mtu_desired_central,
p_gatt->att_mtu_desired_periph);
}
/**@brief Function for initializing the GATT library. */
void gatt_init(void)
{
ret_code_t err_code;
err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
APP_ERROR_CHECK(err_code);
err_code = nrf_ble_gatt_att_mtu_periph_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling events from the BSP module.
*
* @param[in] event Event generated by button press.
*/
void bsp_event_handler(bsp_event_t event)
{
uint32_t err_code;
switch (event)
{
case BSP_EVENT_SLEEP:
//sleep_mode_enter();
break;
case BSP_EVENT_DISCONNECT:
err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
break;
case BSP_EVENT_WHITELIST_OFF:
if (m_conn_handle == BLE_CONN_HANDLE_INVALID)
{
err_code = ble_advertising_restart_without_whitelist(&m_advertising);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
}
break;
default:
break;
}
}
/**@brief Function for handling app_uart events.
*
* @details This function will receive a single character from the app_uart module and append it to
* a string. The string will be be sent over BLE when the last character received was a
* 'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length.
*/
/**@snippet [Handling the data received over UART] */
void uart_event_handle(app_uart_evt_t * p_event)
{
static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
static uint8_t index = 0;
uint32_t err_code;
switch (p_event->evt_type)
{
case APP_UART_DATA_READY:
UNUSED_VARIABLE(app_uart_get(&data_array[index]));
index++;
if ((data_array[index - 1] == '\n') ||
(data_array[index - 1] == '\r') ||
(index >= m_ble_nus_max_data_len))
{
if (index > 1)
{
NRF_LOG_DEBUG("Ready to send data over BLE NUS");
NRF_LOG_HEXDUMP_DEBUG(data_array, index);
do
{
uint16_t length = (uint16_t)index;
err_code = ble_nus_data_send(&m_nus, data_array, &length, m_conn_handle);
if ((err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != NRF_ERROR_RESOURCES) &&
(err_code != NRF_ERROR_NOT_FOUND))
{
APP_ERROR_CHECK(err_code);
}
} while (err_code == NRF_ERROR_RESOURCES);
}
index = 0;
}
break;
case APP_UART_COMMUNICATION_ERROR:
APP_ERROR_HANDLER(p_event->data.error_communication);
break;
case APP_UART_FIFO_ERROR:
APP_ERROR_HANDLER(p_event->data.error_code);
break;
default:
break;
}
}
/**@snippet [Handling the data received over UART] */
/**@brief Function for initializing the UART module.
*/
/**@snippet [UART Initialization] */
static void uart_init(void)
{
uint32_t err_code;
app_uart_comm_params_t const comm_params =
{
.rx_pin_no = PINO_RX,//19,//RX_PIN_NUMBER,
.tx_pin_no = PINO_TX,//23, //TX_PIN_NUMBER,
.rts_pin_no = 0,//RTS_PIN_NUMBER,
.cts_pin_no = 0,//CTS_PIN_NUMBER,
.flow_control = APP_UART_FLOW_CONTROL_DISABLED,
.use_parity = false,
#if defined (UART_PRESENT)
.baud_rate = NRF_UART_BAUDRATE_115200
#else
.baud_rate = NRF_UARTE_BAUDRATE_115200
#endif
};
APP_UART_FIFO_INIT(&comm_params,
UART_RX_BUF_SIZE,
UART_TX_BUF_SIZE,
uart_event_handle,
APP_IRQ_PRIORITY_LOWEST,
err_code);
APP_ERROR_CHECK(err_code);
}
/**@snippet [UART Initialization] */
/**@brief Function for initializing the Advertising functionality.
*/
static void advertising_init(void)
{
uint32_t err_code;
ble_advertising_init_t init;
memset(&init, 0, sizeof(init));
init.advdata.name_type = BLE_ADVDATA_FULL_NAME;
init.advdata.include_appearance = false;
init.advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;//BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
init.srdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
init.srdata.uuids_complete.p_uuids = m_adv_uuids;
init.config.ble_adv_fast_enabled = true;
init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
init.config.ble_adv_fast_timeout = APP_ADV_DURATION;
init.evt_handler = on_adv_evt;
err_code = ble_advertising_init(&m_advertising, &init);
APP_ERROR_CHECK(err_code);
ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}
/**@brief Function for initializing buttons and leds.
*
* @param[out] p_erase_bonds Will be true if the clear bonding button was pressed to wake the application up.
*/
static void buttons_leds_init(bool * p_erase_bonds)
{
bsp_event_t startup_event;
uint32_t err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
APP_ERROR_CHECK(err_code);
err_code = bsp_btn_ble_init(NULL, &startup_event);
APP_ERROR_CHECK(err_code);
*p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
}
/**@brief Function for initializing the nrf log module.
*/
static void log_init(void)
{
ret_code_t err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
NRF_LOG_DEFAULT_BACKENDS_INIT();
}
/**@brief Function for initializing power management.
*/
static void power_management_init(void)
{
ret_code_t err_code;
err_code = nrf_pwr_mgmt_init();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling the idle state (main loop).
*
* @details If there is no pending log operation, then sleep until next the next event occurs.
*/
static void idle_state_handle(void)
{
if (NRF_LOG_PROCESS() == false)
{
nrf_pwr_mgmt_run();
}
}
/**@brief Function for starting advertising.
*/
static void advertising_start(void)
{
uint32_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
//printf("Erro no advertising start: 0x%08X", err_code);
APP_ERROR_CHECK(err_code);
}
//Peer_manager-------------------------------------------------------------------------------------------
// Peer Manager Init
static void peer_manager_init(void)
{
memset(&m_sec_params, 0, sizeof(m_sec_params));
m_sec_params.bond = 1;
m_sec_params.mitm = 1; // MITM protection ativado (necessário para PIN)
m_sec_params.lesc = 0;
m_sec_params.io_caps = BLE_GAP_IO_CAPS_DISPLAY_ONLY; // ? Sem entrada ou saída
m_sec_params.oob = 0;
m_sec_params.min_key_size = 7;
m_sec_params.max_key_size = 16;
m_sec_params.kdist_own.enc = 1;
m_sec_params.kdist_own.id = 1;
m_sec_params.kdist_peer.enc = 1;
m_sec_params.kdist_peer.id = 1;
}
//Dis_init----------------------------------------------------------------------------------------------------
static void dis_init(void)
{
ret_code_t err_code;
ble_dis_init_t dis_init_obj;
memset(&dis_init_obj, 0, sizeof(dis_init_obj));
ble_srv_ascii_to_utf8(&dis_init_obj.manufact_name_str, (char *)MANUFACTURER_NAME);
dis_init_obj.dis_char_rd_sec = SEC_OPEN;
err_code = ble_dis_init(&dis_init_obj);
APP_ERROR_CHECK(err_code);
}
//Dis_init----------------------------------------------------------------------------------------------------
//Peer_manager-------------------------------------------------------------------------------------------
void app_error_fault_handler(uint32_t id, uint32_t pc, uint32_t info)
{
printf("\n[ERRO CRÍTICO]\n");
printf("ID: 0x%08lX\n", id);
printf("PC: 0x%08lX\n", pc);
printf("INFO: 0x%08lX\n", info);
// Se info for um ponteiro válido, pode conter mais informações:
error_info_t * err_info = (error_info_t *)info;
printf("Código de erro: 0x%08lX\n", err_info->err_code);
printf("Linha: %lu\n", err_info->line_num);
printf("Arquivo: %s\n", err_info->p_file_name);
//NRF_BREAKPOINT_COND; // Permite parar no debug
//while (1); // trava para análise
}
//watchdog-------------------------------------------------------------------------------------------
nrf_drv_wdt_channel_id m_channel_id; // Canal do Watchdog
void wdt_event_handler(void)
{
printf("Watchdog atuando..."); // usa a funo no init// Se o watchdog não for alimentado a tempo, o sistema será reiniciado
}
void wdt_init(void)
{
uint32_t err_code;
// Inicializa o watchdog com um timeout de 5 segundos
err_code = nrf_drv_wdt_init(NULL, wdt_event_handler);
APP_ERROR_CHECK(err_code);
// Aloca um canal para alimentar o watchdog
err_code = nrf_drv_wdt_channel_alloc(&m_channel_id);
APP_ERROR_CHECK(err_code);
// Ativa o watchdog
nrf_drv_wdt_enable();
}
void feed_wdt(void)
{
nrf_drv_wdt_channel_feed(m_channel_id); // Alimenta o watchdog
}
//watchdog-------------------------------------------------------------------------------------------
/**@brief Application main function.
*/
int main(void)
{
bool erase_bonds;
// Initialize.
uart_init();
log_init();
timers_init();
//buttons_leds_init(&erase_bonds);
power_management_init();
ble_stack_init();
gap_params_init();
gatt_init();
dis_init();
services_init();
peer_manager_init();
advertising_init();
conn_params_init();
//wdt_init(); // Inicializa o Watchdog
// Start execution.
printf("\r\nModulo BLE Nordic\r\n");
NRF_LOG_INFO("Debug logging for UART over RTT started.");
advertising_start();
// Enter main loop.
for (;;)
{
//feed_wdt(); // Alimenta o watchdog para evitar reset
idle_state_handle();
}
}
I'm using SDK nRF5_SDK_17.1.0_ddde560 version, and I modified my ble_nus_init function inside the ble_nuc.c file replacing the features to using secure pairing.
uint32_t ble_nus_init(ble_nus_t * p_nus, ble_nus_init_t const * p_nus_init)
{
ret_code_t err_code;
ble_uuid_t ble_uuid;
ble_uuid128_t nus_base_uuid = NUS_BASE_UUID;
ble_add_char_params_t add_char_params;
VERIFY_PARAM_NOT_NULL(p_nus);
VERIFY_PARAM_NOT_NULL(p_nus_init);
// Initialize the service structure.
p_nus->data_handler = p_nus_init->data_handler;
/**@snippet [Adding proprietary Service to the SoftDevice] */
// Add a custom base UUID.
err_code = sd_ble_uuid_vs_add(&nus_base_uuid, &p_nus->uuid_type);
VERIFY_SUCCESS(err_code);
ble_uuid.type = p_nus->uuid_type;
ble_uuid.uuid = BLE_UUID_NUS_SERVICE;
// Add the service.
err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
&ble_uuid,
&p_nus->service_handle);
/**@snippet [Adding proprietary Service to the SoftDevice] */
VERIFY_SUCCESS(err_code);
// Add the RX Characteristic.
memset(&add_char_params, 0, sizeof(add_char_params));
add_char_params.uuid = BLE_UUID_NUS_RX_CHARACTERISTIC;
add_char_params.uuid_type = p_nus->uuid_type;
add_char_params.max_len = BLE_NUS_MAX_RX_CHAR_LEN;
add_char_params.init_len = sizeof(uint8_t);
add_char_params.is_var_len = true;
add_char_params.char_props.write = 1;
add_char_params.char_props.write_wo_resp = 1;
//add_char_params.read_access = SEC_OPEN;
//add_char_params.write_access = SEC_OPEN;
add_char_params.read_access = SEC_MITM;
add_char_params.write_access = SEC_MITM;
err_code = characteristic_add(p_nus->service_handle, &add_char_params, &p_nus->rx_handles);
if (err_code != NRF_SUCCESS)
{
return err_code;
}
// Add the TX Characteristic.
/**@snippet [Adding proprietary characteristic to the SoftDevice] */
memset(&add_char_params, 0, sizeof(add_char_params));
add_char_params.uuid = BLE_UUID_NUS_TX_CHARACTERISTIC;
add_char_params.uuid_type = p_nus->uuid_type;
add_char_params.max_len = BLE_NUS_MAX_TX_CHAR_LEN;
add_char_params.init_len = sizeof(uint8_t);
add_char_params.is_var_len = true;
add_char_params.char_props.notify = 1;
//add_char_params.read_access = SEC_OPEN;
//add_char_params.write_access = SEC_OPEN;
//add_char_params.cccd_write_access = SEC_OPEN;
add_char_params.read_access = SEC_MITM;
add_char_params.write_access = SEC_NO_ACCESS;
add_char_params.cccd_write_access = SEC_MITM;
return characteristic_add(p_nus->service_handle, &add_char_params, &p_nus->tx_handles);
/**@snippet [Adding proprietary characteristic to the SoftDevice] */
}
Anyone can help me to solve it? Regards
