Unable to add multiple 128bit UUID services

[Esterina]

I was able to add the Device Information service as well as a proprietary service using a 128 bit UUID. I modeled after the ble_peripheral uart example. However when I try to add this service on top of the proprietary UART service in the ble_peripheral example, my board stops advertising. I tried several variants but still no luck. Is there an example that adds multiple proprietary services?

I am using 2.0.0-7.alpha (2015-12-18). I tried to update but was unsuccessful. I got the following message:

I also tried to add the UUID for the UART using the example code. Same problem!

I am attaching a file with the relevant code.

MultipleServices.docx

[RK]

Usual advice - put a breakpoint in the app error handler because that's most likely where you went after a function returned an error. And most likely you went there because the advertising encoder returned an error code because there's no room in the advertising packet for a long custom UUID along with all the other stuff which is already in there. Put it in the scan response.

[hkartadi]

Hi

I also have the same issue, basically I modified a example of heart rate monitor with adding custom 128bit uuid service (I removed all standard 16-bit UUID services). The board works and advertising that 128bit. However, when I enable the Over the air DFU defined which is by default using different 128bit UUID. The board does not work anymore - no led to indicate anything that probably means the code doesnt even execute to main while loop.

Then, if I comment out my custom 128bit UUID and enable just the 128bit DFU services. The board works and advertise!. Does it mean only 1 base 128bit UUID can be used? or other workaround I can try?

Andy