ABOUT ZIGBEE OF NRF54L15

[jermi]

Hi Nordic：

    We are currently testing Zigbee on the nRF54L15 platform using the Zigbee R23-add-on-V1.0.0 SDK. It has been observed that when a low-power node disconnects from the gateway, it cannot enter low-power mode until it successfully rejoins the network. Are there any solutions to address this issue?

Regard Best

Jermi

[Edvin]

If it is not called already, you should call stop_network_rejoin() after a given amount of time. That amount of time is something you decide in your application.

I thought this would be called automatically, after CONFIG_ZIGBEE_DEV_REJOIN_TIMEOUT_MS (default 200 seconds).

If start_network_rejoin() is called, then it will start this timer. This iystem is a bit confusing, since it tries to send a beacon every 2^n seconds. So first after 1 second, 2 seconds, 4 seconds, 8 seconds, etc. and all of these will restart the timer. 

But when this reaches 200 seconds, you will see in the log:

"TC Rejoin was not successful (status: -1)". You will see that line being printed in ncs-zigbee\subsys\lib\zigbee_app_utils\zigbee_app_utils.c, in the zigbee_default_signal_handler(), in the ZB_BDB_SIGNAL_TC_REJOIN_DONE event.

You can use this event to enter system off mode, if that is what you prefer. In this mode, it can be woken up by a button press. 

You can use sys_poweroff() to enter system off mode, and you need to include:

#include <zephyr/sys/poweroff.h>

And CONFIG_POWEROFF=y

Best regards,

Edvin

[sg3]

Thank you very much—system off mode does indeed solve my problem. At the same time, could you please provide sample code that wakes up periodically from system off mode?

[sg3]

1、The compilation fails with the error "CONFIG_GRTC_WAKEUP_ENABLE is not defined."

2、If I use the code below directly, it still won't wake up.

	LOG_INF("Starting system...");
// #if defined(CONFIG_GRTC_WAKEUP_ENABLE)
#if 1
	int err = z_nrf_grtc_wakeup_prepare(10 * USEC_PER_SEC);

	if (err < 0) {
		printk("Unable to prepare GRTC as a wake up source (err = %d).\n", err);
	} else {
		printk("Entering system off; wait %u seconds to restart\n", 10);
	}
#endif
	k_msleep(5000);
	sys_poweroff();

[Edvin]

Sorry that I didn't specify. CONFIG_GRTC_WAKEUP_ENABLE is specific for the sample NCS\zephyr\samples\boards\nordic\system_off. 

You can test that sample and see if it wakes up. Add this in your main file to keep track of the uptime:

printk("Uptime: %d\n", k_uptime_get_32());

sg3 said:

2、If I use the code below directly, it still won't wake up.

Does it build? What does it print? "Entering system off..." or "Unable to prepare GRTC..."?

BR,
Edvin

[sg3]

This is the log. It is not waking up every 10 second as expected; instead, it keeps restarting continually.

This is my test project code.

3124.system_off.zip

[Edvin]

Then there is something else waking the system up. Try the attached project:

system_off_mod.zip

This will also print the reset reason. I tried the application that you sent me, and it only woke up every 10 seconds, so perhaps you have connected something to the kit that keeps waking it up?

Best regards,

Edvin

[sg3]

Thank you very much—this code does indeed solve my problem.

[Edvin]

Glad to hear that your problem is solved!

Best regards,

Edvin