I want to use the async driver,but did not find the example or explanation.
I have looked for the whole examples with "nrf_libuarte_async.h", found nothing,a little strange,I guess the NRF_LOG should useed this lib,but not check yet.
I want to use the async driver,but did not find the example or explanation.
I have looked for the whole examples with "nrf_libuarte_async.h", found nothing,a little strange,I guess the NRF_LOG should useed this lib,but not check yet.
get reply from gemini:
_uarte_idx:
用途: 指定要使用的 UARTE 硬件实例的索引。
安全值: 在 nRF52810 上，只有一个 UARTE 外设，所以该值必须是 0。
_timer0_idx:
用途: 这是底层 nrf_libuarte_drv 驱动内部使用的定时器。它用于管理 EasyDMA 传输和缓冲区切换。
安全值: SoftDevice 会使用 TIMER0，因此你不能使用 0。你应该选择一个空闲的定时器，例如 1 或 2。
_rtc1_idx 和 _timer1_idx:
用途: 这两个参数用于异步超时机制。库会根据你的 sdk_config.h 配置选择一个作为超时计时器。它会从 TIMER1、RTC1 和 App Timer 中选择一个。
安全值: RTC0 通常被 SoftDevice 占用，所以 RTC1 是一个安全的选择。TIMER1 和 TIMER2 通常也是可用的。
如何选择:
如果你想使用 TIMER1 作为超时计时器，将 _timer1_idx 设置为 1，并将 _rtc1_idx 设置为 NRF_LIBUARTE_PERIPHERAL_NOT_USED。
如果你想使用 RTC1 作为超时计时器，将 _rtc1_idx 设置为 1，并将 _timer1_idx 设置为 NRF_LIBUARTE_PERIPHERAL_NOT_USED。
如果你想使用 app_timer，则将 _rtc1_idx 和 _timer1_idx 都设置为 NRF_LIBUARTE_PERIPHERAL_NOT_USED。
I defined like this :
NRF_LIBUARTE_ASYNC_DEFINE(m_libuarte, 0, 1, NRF_LIBUARTE_PERIPHERAL_NOT_USED,2, NRF_SDH_BLE_GATT_MAX_MTU_SIZE,3);
It report error 
..\..\..\app_uarte.c(14): error: #94: the size of an array must be greater than zero NRF_LIBUARTE_ASYNC_DEFINE(m_libuarte, 0, 1, NRF_LIBUARTE_PERIPHERAL_NOT_USED,2, NRF_SDH_BLE_GATT_MAX_MTU_SIZE,3);
this is the extend result of NRF_LIBUARTE_ASYNC_DEFINE:
extern char (*_do_assert(void)) [sizeof(char[1 - 2* !(3 >= 3)])];
extern char (*_do_assert(void)) [sizeof(char[1 - 2* !(!((1 == 0) && (255 == 255) && (2 == 255)))])];
extern char (*_do_assert(void)) [sizeof(char[1 - 2* !(0 < 1)])];
extern char (*_do_assert(void)) [sizeof(char[1 - 2* !(1 == 1)])];
extern char (*_do_assert(void)) [sizeof(char[1 - 2* !(0 == 1)])];
static nrf_libuarte_drv_ctrl_blk_t m_libuarte_libuartectrl_blk;
static const nrf_libuarte_drv_t m_libuarte_libuarte = {
. ctrl_blk = &m_libuarte_libuartectrl_blk,
. timer = { . p_reg = ((NRF_TIMER_Type*) 0x40009000UL),
. instance_id = 1, . cc_channel_count = 4, },
. uarte = ((NRF_UARTE_Type*) 0x40002000UL), };
static uint8_t * m_libuarte_rxdata_queue_nrf_queue_buffer[(3) + 1];
static nrf_queue_cb_t m_libuarte_rxdata_queue_nrf_queue_cb;
;
const nrf_queue_t m_libuarte_rxdata_queue __attribute__ ((section("nrf_queue"))) __attribute__((used)) = {
. p_cb = &m_libuarte_rxdata_queue_nrf_queue_cb,
. p_buffer = m_libuarte_rxdata_queue_nrf_queue_buffer,
. size = (3), . element_size = sizeof(uint8_t *),
. mode = NRF_QUEUE_MODE_NO_OVERFLOW, };
extern char (*_do_assert(void)) [sizeof(char[1 - 2* !((3) <= 255)])];
static uint8_t m_libuarte_rx_pool_nrf_balloc_pool_stack[(3)];
static uint32_t m_libuarte_rx_pool_nrf_balloc_pool_mem [((((52)) - 1) + (sizeof(uint32_t)) - ((((52)) - 1) % (sizeof(uint32_t)))) * (3) / sizeof(uint32_t)];
static nrf_balloc_cb_t m_libuarte_rx_pool_nrf_balloc_cb; ;
const nrf_balloc_t m_libuarte_rx_pool __attribute__ ((section("nrf_balloc"))) __attribute__((used)) = {
. p_cb = &m_libuarte_rx_pool_nrf_balloc_cb,
. p_stack_base = m_libuarte_rx_pool_nrf_balloc_pool_stack,
. p_stack_limit = m_libuarte_rx_pool_nrf_balloc_pool_stack + (3),
. p_memory_begin = m_libuarte_rx_pool_nrf_balloc_pool_mem,
. block_size = ((((52)) - 1) + (sizeof(uint32_t)) - ((((52)) - 1) % (sizeof(uint32_t)))), };
;
static app_timer_t m_libuarte_app_timer_data = { . end_val = 0xFFFFFFFFFFFFFFFFULL, };
static const app_timer_id_t m_libuarte_app_timer = &m_libuarte_app_timer_data; nrf_libuarte_app_timer_ctrl_blk_t m_libuarte_app_timer_ctrl_blk;
static nrf_libuarte_async_ctrl_blk_t m_libuartectrl_blk;
static const nrf_libuarte_async_t m_libuarte = {
. p_rx_pool = &m_libuarte_rx_pool,
. p_rx_queue = &m_libuarte_rxdata_queue,
. p_rtc = 0,
. p_timer = 0,
. p_app_timer = &m_libuarte_app_timer,
. p_app_timer_ctrl_blk = &m_libuarte_app_timer_ctrl_blk,
. p_libuarte = &m_libuarte_libuarte,
. p_ctrl_blk = &m_libuartectrl_blk,
. rx_buf_size = 52, };
;
this is false, but what triggered this?
extern char (*_do_assert(void)) [sizeof(char[1 - 2* !(0 == 1)])];
I'm useing nrf52810,nrf52 SDK 17.1,S113.
BLE peripheral, use UARTE + BLE SD to bridge between my MCU & Server instead of NUS.
I have disabled LOG,so no conflict on UARTE.
TIMER1 & TIMER2 enabled.
