The client does not enter sleep mode as expected.

[Naveen Pyda]

We are using the Nordic Semiconductor nRF7002-DK. In this board, both PS-Poll and No-PS-Poll power-saving modes are working as expected. However, when running in TWT (Target Wake Time) power mode using the following command:-wifi twt setup 0 0 2 2 0 1 1 1 1000 60000, the client does not enter sleep mode as expected. Can you help us to enter the device into sleep mode.

Applications Versions: 

1. nRF connection Desktop v5.2.0
2. Toolchain Manager v1.6.0
3. Visual studio cade v2.9.2
4. Windows 11 pro Platform

[Marte Myrvold]

Hi,

What access point are you using? It could be that the access point does not support TWT.

Can you share device logs when enabling TWT? You can also try the Wi-Fi TWT sample.

Best regards,
Marte

[Naveen Pyda]

Hi,

We are currently using a FreeBox Access Point, which supports TWT (Target Wake Time) power save mode. In the packet capture, we can see both the TWT Request and Accept frames. However, the client is still not entering power save mode.

TWT enabling logs:-

uart:~$ wifi twt setup 0 0 2 2 0 1 1 1 2000 60000
TWT operation TWT setup with dg: 2, flow_id: 2 requested
TWT response: TWT accept
== TWT negotiated parameters ==
TWT Dialog token: 2
TWT flow ID: 1
TWT negotiation type: TWT individual negotiation
TWT responder: true
TWT implicit: true
TWT announce: true
TWT trigger: true
TWT wake interval: 2048 us
TWT interval: 60000 us

For your reference Pcap screenshot attached below.

Thanks & regards,

Naveen P

[Naveen Pyda]

Hi Marte,

For your reference, I’ve attached a screenshot of the nRF Connect version. In Google Chrome, the latest version shown for the Windows platform is v5.2.0.

Best regards,

Naveen P

[Marte Myrvold]

Hi Naveen,

That is the version of the nRF Connect for Desktop application, and not the SDK. Please check which version of the nRF Connect SDK you have.

Best regards,
Marte

[Naveen Pyda]

Hi Marte,

sorry for wrong update,We are using nRF connect SDK v2.9.2.

[Marte Myrvold]

Hi,

How do you verify that the device does not enter sleep mode?

Can you try the Wi-Fi TWT sample?

Best regards,
Marte

[Naveen Pyda]

Hi Marte,

We verified the PCAPs that I shared with you privately.

After running the following command:

wifi twt setup 0 0 2 2 0 1 1 1 2000 60000

we initiated a ping from the client side and captured the PCAPs. Upon reviewing the captures, we observed that the client did not send the "SAT will go to sleep" message.

We will test with the Wi-Fi TWT sample and get back to you.

Thanks & Regards,

Naveen P

[Marte Myrvold]

Hi,

First, the TWT interval is in microseconds, so setting it to 60000 equals 0.06 seconds. This interval is the total TWT interval, i.e., both wake-up time and sleeping time. I would recommend increasing it, for example, to 6000000 instead.

Can you verify that the device does not enter sleep mode by measuring the power consumption or checking the sleep state using NET_EVENT_WIFI_TWT_SLEEP_STATE? You can see examples of how to check the sleep state in the TWT sample (see https://github.com/nrfconnect/sdk-nrf/blob/v2.9.2/samples/wifi/twt/src/main.c#L306) and in Lesson 6 exercise 2 - Enabling TWT with notification in our Wi-Fi Fundamentals course on DevAcademy. The latter also shows how to measure power consumption.

Best regards,
Marte

[Naveen Pyda]

Hi Marte,

Apologies for the delayed response. I did try setting the interval to 6000000 as you suggested, but unfortunately, the client still does not enter the sleep state. It continues to stay awake

For your reference I had attached the pcaps below.
https://drive.google.com/file/d/19-B2L2V7YFyelTCId7S2xmWr-m4ONEEM/view?usp=drive_link

[Marte Myrvold]

Hi,

Please verify that the device does not enter sleep state by measuring the power consumption or checking the sleep state using NET_EVENT_WIFI_TWT_SLEEP_STATE as I mentioned in my previous reply.

Best regards,
Marte

[Naveen Pyda]

Hi,

As you advised, we followed the link https://academy.nordicsemi.com/courses/wi-fi-fundamentals/lessons/lesson-6-wifi-fundamentals/topic/lesson-6-exercise-2-2/nk, but we are still facing the same issue.

Thanks & Regards,

Naveen 

[Marte Myrvold]

Hi Naveen,

Did you test by measuring the power consumption and/or checking the sleep state using NET_EVENT_WIFI_TWT_SLEEP_STATE?

Best regards,
Marte