Hello Team,
I am working with Thingy91x and I was checking whether is pwm led or pwm gpio can be configured for nRF5340 of Thingy 91x. If possible will you please let me know the steps I need to follow to configure pwm channel in Thingy 91x nrf5340 and get pwm output.
Kindly please let me know the limitations for this steps.
Thanks and regards
Vinay
Yes, PWM can be configured for the nRF5340 on the Thingy:91 X
Step 1 :- PWM in prj.conf
CONFIG_PWM=y CONFIG_PWM_LOG_LEVEL_DBG=y CONFIG_LED=y CONFIG_LED_PWM=y
Step 2 :- Pin Control & PWM in Devicetree Overlay
&pinctrl {
pwm0_default_alt: pwm0_default_alt {
group1 {
psels = <NRF_PSEL(PWM_OUT0, 0, 30)>;
};
};
pwm0_sleep_alt: pwm0_sleep_alt {
group1 {
psels = <NRF_PSEL(PWM_OUT0, 0, 30)>;
low-power-enable;
};
};
};
&pwm0 {
status = "okay";
pinctrl-0 = <&pwm0_default_alt>;
pinctrl-1 = <&pwm0_sleep_alt>;
pinctrl-names = "default", "sleep";
};
/ {
pwmleds {
compatible = "pwm-leds";
led_pwm_0 {
pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
label = "PWM LED 0";
};
};
aliases {
pwm-led0 = &led_pwm_0;
};
};
Step 3 :- application code
#include <zephyr/device.h>
#include <zephyr/drivers/pwm.h>
#define PWM_PERIOD_NS 20000000
#define PWM_PULSE_WIDTH 1400000
static const struct pwm_dt_spec pwm_led0 =
PWM_DT_SPEC_GET(DT_ALIAS(pwm_led0));
int main(void) {
if (!pwm_is_ready_dt(&pwm_led0)) {
return 0;
}
pwm_set_dt(&pwm_led0, PWM_PERIOD_NS, PWM_PULSE_WIDTH);
return 0;
}
Step 4 :-thingy91x_nrf9151_ns.overlay(external power fix)
&exp_board_enable {
/delete-property/ output-low;
output-high;
};
Build withwest build -b thingy91x/nrf5340/cpuappand flash. Let me know if you hit any issues!
Hello Nishant,
Thank you for your reply. I really appreciate it.
But I am facing issue while building this configuration.
I am adding the logs and the project zip file which I have configured as per your guidance.
(v3.0.0) C:\ncs\v3.0.0\nrf> west build -b thingy91x/nrf5340/cpuapp C:\Users\11221\Downloads\Thingy91x_nrf5430_pwm -p always
-- west build: making build dir C:\ncs\v3.0.0\nrf\build pristine
-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.0/zephyr/.cache
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: thingy91x, qualifiers: nrf5340/cpuapp
Parsing C:/ncs/v3.0.0/zephyr/share/sysbuild/Kconfig
Loaded configuration 'C:/ncs/v3.0.0/nrf/build/_sysbuild/empty.conf'
Merged configuration 'C:/ncs/v3.0.0/nrf/build/_sysbuild/empty.conf'
Configuration saved to 'C:/ncs/v3.0.0/nrf/build/zephyr/.config'
Kconfig header saved to 'C:/ncs/v3.0.0/nrf/build/_sysbuild/autoconf.h'
--
*****************************
* Running CMake for mcuboot *
*****************************
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v3.0.0/bootloader/mcuboot/boot/zephyr
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.0/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: thingy91x, qualifiers: nrf5340/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpuapp.dts
-- Found devicetree overlay: C:/ncs/v3.0.0/bootloader/mcuboot/boot/zephyr/app.overlay
-- Found devicetree overlay: C:/ncs/v3.0.0/nrf/modules/mcuboot/flash_sim.overlay
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/zephyr.dts
-- Generated pickled edt: C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/edt.pickle
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/dts.cmake
warning: UART_NRFX (defined at drivers/serial\Kconfig.nrfx:6) was assigned the value 'y' but got the
value 'n'. Check these unsatisfied dependencies: (DT_HAS_NORDIC_NRF_UART_ENABLED ||
DT_HAS_NORDIC_NRF_UARTE_ENABLED) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_NRFX and/or look up UART_NRFX in the
menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values,
and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: LOG_DEFAULT_LEVEL (defined at subsys/logging\Kconfig.filtering:13) was assigned the value
'0' but got the value ''. Check these unsatisfied dependencies: LOG (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_LOG_DEFAULT_LEVEL and/or look up
LOG_DEFAULT_LEVEL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: The choice symbol MCUBOOT_LOG_LEVEL_INF (defined at
subsys/logging/Kconfig.template.log_config:17) was selected (set =y), but no symbol ended up as the
choice selection. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUBOOT_LOG_LEVEL_INF
and/or look up MCUBOOT_LOG_LEVEL_INF in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.
warning: The choice symbol LOG_MODE_MINIMAL (defined at subsys/logging\Kconfig.mode:29) was selected
(set =y), but no symbol ended up as the choice selection. See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_LOG_MODE_MINIMAL and/or look up
LOG_MODE_MINIMAL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: Deprecated symbol SOC_DCDC_NRF53X_APP is enabled.
warning: Deprecated symbol SOC_DCDC_NRF53X_NET is enabled.
warning: Deprecated symbol NFCT_PINS_AS_GPIOS is enabled.
warning: Deprecated symbol DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM is enabled.
Parsing C:/ncs/v3.0.0/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration 'C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpuapp_defconfig'
Merged configuration 'C:/ncs/v3.0.0/bootloader/mcuboot/boot/zephyr/prj.conf'
Merged configuration 'C:/ncs/v3.0.0/bootloader/mcuboot/boot/zephyr/boards/thingy91x_nrf5340_cpuapp.conf'
Merged configuration 'C:/ncs/v3.0.0/nrf/subsys/bootloader/image/log_minimal.conf'
Merged configuration 'C:/ncs/v3.0.0/bootloader/mcuboot/boot/zephyr/external_crypto.conf'
Merged configuration 'C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/.config.sysbuild'
Configuration saved to 'C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/.config'
Kconfig header saved to 'C:/ncs/v3.0.0/nrf/build/mcuboot/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
MCUBoot bootloader key file: C:/ncs/v3.0.0/bootloader/mcuboot/root-ec-p256.pem
CMake Warning at CMakeLists.txt:393 (message):
WARNING: Using default MCUboot signing key file, this file is for debug use
only and is not secure!
-- Configuring done
-- Generating done
-- Build files have been written to: C:/ncs/v3.0.0/nrf/build/mcuboot
--
************************************
* Running CMake for empty_net_core *
************************************
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v3.0.0/nrf/samples/nrf5340/empty_net_core
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.0/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: thingy91x, qualifiers: nrf5340/cpunet
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpunet.dts
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/zephyr.dts
-- Generated pickled edt: C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/edt.pickle
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/dts.cmake
warning: UART_CONSOLE (defined at drivers/console/Kconfig:42) was assigned the value 'y' but got the
value 'n'. Check these unsatisfied dependencies: SERIAL_HAS_DRIVER (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_CONSOLE and/or look up UART_CONSOLE in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: Deprecated symbol DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM is enabled.
Parsing C:/ncs/v3.0.0/zephyr/Kconfig
Loaded configuration 'C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpunet_defconfig'
Merged configuration 'C:/ncs/v3.0.0/nrf/samples/nrf5340/empty_net_core/prj.conf'
Merged configuration 'C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/.config.sysbuild'
Configuration saved to 'C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/.config'
Kconfig header saved to 'C:/ncs/v3.0.0/nrf/build/empty_net_core/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
CMake Warning at C:/ncs/v3.0.0/zephyr/CMakeLists.txt:1002 (message):
No SOURCES given to Zephyr library: drivers__console
Excluding target from build.
CMake Warning at C:/ncs/v3.0.0/zephyr/CMakeLists.txt:1002 (message):
No SOURCES given to Zephyr library: drivers__serial
Excluding target from build.
-- Configuring done
-- Generating done
-- Build files have been written to: C:/ncs/v3.0.0/nrf/build/empty_net_core
--
*************************
* Running CMake for b0n *
*************************
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v3.0.0/nrf/samples/nrf5340/netboot
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.0/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: thingy91x, qualifiers: nrf5340/cpunet
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpunet.dts
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/b0n/zephyr/zephyr.dts
-- Generated pickled edt: C:/ncs/v3.0.0/nrf/build/b0n/zephyr/edt.pickle
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/b0n/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/ncs/v3.0.0/nrf/build/b0n/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/ncs/v3.0.0/nrf/build/b0n/zephyr/dts.cmake
warning: UART_CONSOLE (defined at drivers/console/Kconfig:42) was assigned the value 'y' but got the
value 'n'. Check these unsatisfied dependencies: SERIAL_HAS_DRIVER (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_CONSOLE and/or look up UART_CONSOLE in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.
warning: Deprecated symbol DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM is enabled.
Parsing C:/ncs/v3.0.0/nrf/samples/nrf5340/netboot/Kconfig
Loaded configuration 'C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpunet_defconfig'
Merged configuration 'C:/ncs/v3.0.0/nrf/samples/nrf5340/netboot/prj.conf'
Merged configuration 'C:/ncs/v3.0.0/nrf/build/b0n/zephyr/.config.sysbuild'
Configuration saved to 'C:/ncs/v3.0.0/nrf/build/b0n/zephyr/.config'
Kconfig header saved to 'C:/ncs/v3.0.0/nrf/build/b0n/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
CMake Warning at C:/ncs/v3.0.0/zephyr/CMakeLists.txt:1002 (message):
No SOURCES given to Zephyr library: drivers__console
Excluding target from build.
CMake Warning at C:/ncs/v3.0.0/zephyr/CMakeLists.txt:1002 (message):
No SOURCES given to Zephyr library: drivers__serial
Excluding target from build.
CMake Warning at C:/ncs/v3.0.0/zephyr/CMakeLists.txt:2180 (message):
__ASSERT() statements are globally ENABLED
-- Configuring done
-- Generating done
-- Build files have been written to: C:/ncs/v3.0.0/nrf/build/b0n
--
************************
* Running CMake for b0 *
************************
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v3.0.0/nrf/samples/bootloader
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.0/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: thingy91x, qualifiers: nrf5340/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpuapp.dts
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/b0/zephyr/zephyr.dts
-- Generated pickled edt: C:/ncs/v3.0.0/nrf/build/b0/zephyr/edt.pickle
-- Generated zephyr.dts: C:/ncs/v3.0.0/nrf/build/b0/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/ncs/v3.0.0/nrf/build/b0/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/ncs/v3.0.0/nrf/build/b0/zephyr/dts.cmake
warning: Deprecated symbol SOC_DCDC_NRF53X_APP is enabled.
warning: Deprecated symbol SOC_DCDC_NRF53X_NET is enabled.
warning: Deprecated symbol NFCT_PINS_AS_GPIOS is enabled.
warning: Deprecated symbol DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM is enabled.
Parsing C:/ncs/v3.0.0/zephyr/Kconfig
Loaded configuration 'C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpuapp_defconfig'
Merged configuration 'C:/ncs/v3.0.0/nrf/samples/bootloader/prj.conf'
Merged configuration 'C:/ncs/v3.0.0/nrf/samples/bootloader/boards/thingy91x_nrf5340_cpuapp.conf'
Merged configuration 'C:/ncs/v3.0.0/nrf/build/b0/zephyr/.config.sysbuild'
Configuration saved to 'C:/ncs/v3.0.0/nrf/build/b0/zephyr/.config'
Kconfig header saved to 'C:/ncs/v3.0.0/nrf/build/b0/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
-- Configuring done
-- Generating done
-- Build files have been written to: C:/ncs/v3.0.0/nrf/build/b0
--
*******************************************
* Running CMake for Thingy91x_nrf5430_pwm *
*******************************************
Loading Zephyr default modules (Zephyr base).
-- Application: C:/Users/11221/Downloads/Thingy91x_nrf5430_pwm
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.0/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: thingy91x, qualifiers: nrf5340/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v3.0.0/nrf/boards/nordic/thingy91x/thingy91x_nrf5340_cpuapp.dts
-- Found devicetree overlay: C:/Users/11221/Downloads/Thingy91x_nrf5430_pwm/thingy91x_nrf5340_cpuapp.overlay
devicetree error: /aliases: undefined node label 'led_pwm_0'
CMake Error at C:/ncs/v3.0.0/zephyr/cmake/modules/dts.cmake:305 (execute_process):
execute_process failed command indexes:
1: "Child return code: 1"
Call Stack (most recent call first):
C:/ncs/v3.0.0/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
C:/ncs/v3.0.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
C:/ncs/v3.0.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
CMakeLists.txt:2 (find_package)
-- Configuring incomplete, errors occurred!
CMake Error at cmake/modules/sysbuild_extensions.cmake:514 (message):
CMake configure failed for Zephyr project: Thingy91x_nrf5430_pwm
Location: C:/Users/11221/Downloads/Thingy91x_nrf5430_pwm
Call Stack (most recent call first):
cmake/modules/sysbuild_images.cmake:43 (ExternalZephyrProject_Cmake)
cmake/modules/sysbuild_default.cmake:21 (include)
C:/ncs/v3.0.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
C:/ncs/v3.0.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
C:/ncs/v3.0.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
template/CMakeLists.txt:10 (find_package)
-- Configuring incomplete, errors occurred!
See also "C:/ncs/v3.0.0/nrf/build/CMakeFiles/CMakeOutput.log".
←[91mFATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe '-BC:\ncs\v3.0.0\nrf\build' -GNinja -DBOARD=thingy91x/nrf5340/cpuapp '-SC:\ncs\v3.0.0\zephyr\share\sysbuild' '-DAPP_DIR:PATH=C:\Users\11221\Downloads\Thingy91x_nrf5430_pwm'
←[0m
(v3.0.0) C:\ncs\v3.0.0\nrf>
Thanks and regards,
Vinay
in thingy91x_nrf9151_ns.overlay contains something like:
&exp_board_enable {
...
};
remove this reference and try again
Hi Nishant,
I am able to build it without any errors. Thanks for that.
But when I probe Trace0 pin in current measurement and debug board connector. But I cant see any pwm output. Will you please let me know what else I can probe to get pwm channel output. Or am I missing something here?
Thanks and regards,
Vinay
Hi Nishant,
Is it possible to configure LED as an PWM output channel for Thingy 91x/nrf5340 SoC?
Thanks and regards,
Vinay
Hi vinay
Sorry for late response
yes it is possible to configure LED as an PWM output channel as LED2 is connected to the nRF5340 SoC and the pins are ;
| P0.14 | Red |
| P0.26 | Green |
| P0.15 | Blue |
here is the code base for this https://github.com/NordicDeveloperAcademy/ncs-inter/tree/main/l4/l4_e1_sol , i hope this will help
Thank you Nishant. This Solved my issue
Thank you Nishant. This Solved my issue