So now I have the firmware revision mfw_nrf93m1_1.5.0, updated from 1.4.1 through FOTA. Meanwhile, I tried nRF Connect on nRF93M1 and I have some questions.
1. Most of cellular monitor features seems not supported in nRF93M1. When I use nRF9151, I can see current modem status variables are visible and the trace function is working. Do you have expected timeline when nRF93M1 will be supported in Cellular Monitor, especially traces?
2. Is there a timeline planned for Quick Start support on nRF93M1 DK?
Added:
3. I tried to use nRF Cloud Location through AT command (AT%NRFCLOUDLOCATION) but it seems that the authentication is failing. Do I need to provision something? This is the error log.
AT%NRFCLOUDLOCATION=3,1
%COAP: RESOLVING coap.nrfcloud.com (IPv6)...
%COAP: IPv6: 2600:1f18:56ff:3d02:0000:0000:0000:ffc5, PORT: 5684
%COAP: CONNECTING ...
%COAP: DTLS_STATE,4
%COAP: SENDING_AUTH
%COAP: RESPONSE,4.01
%COAP: AUTH_ERROR,BAD_RESPONSE_4.01
%COAP: EVENT,0x0000,DTLS_CLOSED
ERROR
Regardless of location methods, it always gives the same error.
Edit: my bad, the device was not provisioned in the nRF Cloud. This was documented.
