• State Verified Answer
  • Replies 3 replies
  • Subscribers 71 subscribers
  • Views 3119 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 101371
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

How can I simulator my DK ？ I try keil v4 via soft or jlink but failed. Need your help .

gootoomoon
  1. Copy nrf51.cdb to "C:\Keil\UV4"
  2. Copy nrf51xxx.flm to "C:\Keil\ARM\Flash"
  3. Set the keil project-device to nRF51822(data base : Nordic nRF Series Devices)

This is the logo of Jlink+keil:

It alarm that:“ error ： Flash download failed-"Cotex-M0"”

Load "F:\AAA_BLE\nrf51_sdk_v4_4_2_33551\nrf51822\Board\nrf6310\ble\ble_app_hids_mouse\arm\_build\ble_app_hids_mouse.AXF" Set JLink Project File to "F:\AAA_BLE\nrf51_sdk_v4_4_2_33551\nrf51822\Board\nrf6310\ble\ble_app_hids_mouse\arm\JLinkSettings.ini"

JLink info:

DLL: V4.15n, compiled Jun 18 2010 19:55:09 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull

  • JLink Info: Found SWD-DP with ID 0x0BB11477 **JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
  • JLink Info: Found SWD-DP with ID 0x0BB11477 **JLink Warning: No matching core found. ***JLink Error: Wrong ROM location (15:2). Expected 0xE00FF003, Found 0xF0000003 ROMTableAddr = 0x0

Target info:

Device: nRF51822 VTarget = 3.300V State of Pins: TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 0 Software-Breakpoints: 2048 Watchpoints: 0 JTAG speed: 1000 kHz

Cannot setup Breakpoint at Address Cannot setup Breakpoint at Address Erase Failed! Load "F:\AAA_BLE\nrf51_sdk_v4_4_2_33551\nrf51822\Board\nrf6310\ble\ble_app_hids_mouse\arm\_build\ble_app_hids_mouse.AXF" Set JLink Project File to "F:\AAA_BLE\nrf51_sdk_v4_4_2_33551\nrf51822\Board\nrf6310\ble\ble_app_hids_mouse\arm\JLinkSettings.ini"

JLink info:

DLL: V4.15n, compiled Jun 18 2010 19:55:09 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull

  • JLink Info: Found SWD-DP with ID 0x0BB11477 **JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
  • JLink Info: Found SWD-DP with ID 0x0BB11477 **JLink Warning: No matching core found. ***JLink Error: Wrong ROM location (15:2). Expected 0xE00FF003, Found 0xF0000003 ROMTableAddr = 0x0

Target info:

Device: nRF51822 VTarget = 3.300V State of Pins: TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 0 Software-Breakpoints: 2048 Watchpoints: 0 JTAG speed: 1000 kHz

Cannot setup Breakpoint at Address Cannot setup Breakpoint at Address Erase Failed!

Parents
  • 0

    You need to upgrade Keil and/or the Segger tools. According to the log posted, you have version 4.15 of the Segger DLL, which is extremely old and does not support the nRF51. You can get updated Segger tools from Segger.com, but I suspect that you Keil version is also too old, so you may be better off downloading a new Keil version.

    I'd recommend you to try the latest Segger tools, 4.80, and Keil at least version 4.74.

Reply
  • 0

    You need to upgrade Keil and/or the Segger tools. According to the log posted, you have version 4.15 of the Segger DLL, which is extremely old and does not support the nRF51. You can get updated Segger tools from Segger.com, but I suspect that you Keil version is also too old, so you may be better off downloading a new Keil version.

    I'd recommend you to try the latest Segger tools, 4.80, and Keil at least version 4.74.

Children
Related
Terms of service