Attachments (0)
Nordic Case Info
  • Case ID: 114229
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

MasterControlPanel cant find device

Arthur

Hi !

I'm trying to run the BLE bootloader example (here). I succesfully programmed the SoftDevice and the DFU bootloader :

image description

The device start in bootloader mode (LED 1 and 3 ON). Then I connect my computer to the device DfuTarg (LED 1 go OFF and LED 2 ON). But the MasterControlPanel can’t find anything.

MasterControlPanel v3.10.0.14 nRFgo Studio v1.21.1

Parents
  • 0

    You say that you connect your computer to the DfuTarg. Do you mean that you are using the bluetooth hardware of your computer to connect? You need to connect using the Master Control Panel, and the Master Control Panel only works with nRF51 chips. So you need an extra nRF51 dongle or DK, then flash the master emulator firmware to the dongle or DK, then you can connect to the other DfuTarg device using MCP. If you don't have an extra dongle or DK you can use the Master Control Panel for Android or iOS. Download it from Google Play or App Store. The Android/iOS version also supports DFU.

Reply
  • 0

    You say that you connect your computer to the DfuTarg. Do you mean that you are using the bluetooth hardware of your computer to connect? You need to connect using the Master Control Panel, and the Master Control Panel only works with nRF51 chips. So you need an extra nRF51 dongle or DK, then flash the master emulator firmware to the dongle or DK, then you can connect to the other DfuTarg device using MCP. If you don't have an extra dongle or DK you can use the Master Control Panel for Android or iOS. Download it from Google Play or App Store. The Android/iOS version also supports DFU.

Children
No Data
Terms of service