• State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 71 subscribers
  • Views 2626 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 114275
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to test the oscilloscope i2c?

Quinn

Hi there.

I'm woking with sensor in board nRF51822. Do we have any tool to test oscilloscope i2c? I want to check the signal is same as what I sent or not.

Thanks.

Parents
  • 0

    Logic analyzers are great tools as Hani mentions. You can even tell the analyzer what protocol you are debugging and it will display relevant information about the transmissions. If you just have an oscilloscope I guess it is as easy as hooking the ground clips to ground on your board, and the probes directly onto the SDA and SCL lines? The guy asking questions in this thread uses an oscilloscope, while you can see a trace recorded with a logic analyzer in the comments.

Reply
  • 0

    Logic analyzers are great tools as Hani mentions. You can even tell the analyzer what protocol you are debugging and it will display relevant information about the transmissions. If you just have an oscilloscope I guess it is as easy as hooking the ground clips to ground on your board, and the probes directly onto the SDA and SCL lines? The guy asking questions in this thread uses an oscilloscope, while you can see a trace recorded with a logic analyzer in the comments.

Children
No Data
Related
Terms of service