rigado BMD-300 with nRF52 DK

[Vishnu Pradeep]

HI, Can anybody give me the connections to a BMD-300 with nRF52DK and the steps to program a BMD-300 from scratch? Which document provides the information, if there is any?

thanks, Vishnu

[Dt]

The BMD-300 has read-back protection enabled from factory. Use this utility to do a full chip erase. After that you'll be able to program it.

rigado.zendesk.com/.../226811567-BMD-300-Erase-and-Recovery

[Vishnu Pradeep]

Tried this as well. I got the following

   JLink Error: Write AP register 1 = 0x00000001 ***ERROR
JLink Error: Read AP register 3 = ERROR
JLink Error: Read AP register 3 = ERROR
JLink Error: ****** Error: Communication timed out: Requested 20 bytes, received 0 bytes !
JLinkCheckOutput: FAIL -- errors 6, wrote 0/0, verified 0/0
18-10-2016 10:34:24: Operation FAIL -- Programming failed


===========================
18-10-2016 10:34:38: Start Operation
CheckFilePath: OK -- C:\Users\USER\Desktop\BMD-300 Erase & Recovery
JLinkRunPreFlight: OK -- C:\Users\USER\Desktop\BMD-300 Erase & Recovery\jlink_loader.script
JLink Error: Write DP register 1 = 0x50000000 ***ERROR
JLink Error: Write DP register 2 = 0x01000000 ***ERROR
JLink Error: Write AP register 1 = 0x00000001 ***ERROR
JLink Error: Read AP register 3 = ERROR
JLink Error: Read AP register 3 = ERROR
JLink Error: ****** Error: Communication timed out: Requested 20 bytes, received 0 bytes !
JLinkCheckOutput: FAIL -- errors 6, wrote 0/0, verified 0/0
18-10-2016 10:34:44: Operation FAIL -- Programming failed