This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

How to get 6 byte mac address at nrf51822

When I scan BLE device at nRF UARTv2.0 App in Android4.4, it is appar device name(Ex:Nordic_UART) and 6 byte device address(MAC address?). I want to include mac address in device name. How to get 6 byte mac address at nrf51822?

Parents
  • By default, the BLE address is derived from the NRF_FICR->DEVICEADDR[] and is of 48 bits length (6 bytes). This registers are randomly generated in our production, and they are unique for each device (2^46 different combinations, due to MSbits set to '11').

    You can read out the address using the API call, "sd_ble_gap_address_get(..);" or reading the FICR->DEVICEADDR[x] registers.

    Example: My device advertises with "0xE724 08C78790"

    DEVICEADDR[0] = 0x08C78790 DEVICEADDR[1] = 0xYYYYA724

    The reason why "A7" becomes "E7" is because the specification says that the 2 MSBit of the address must be set '11' (if you're very interested, see Bluetooth Core v4.0, Vol 3, Part C, chapter 10.8.1.)

    BR Håkon

  • Hi,

    Can Nordic MAC address be the same as MAC address of BLE Soc made by another Vendor? As I understand, your MAC address is not an unique address where the first 3 bytes mean Vendor name (www.coffer.com/.../).

Reply Children
No Data
Related