• State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 73 subscribers
  • Views 1202 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 125775
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with bootloader and softdevice nRF52832

aszka

Hi all,

I have been playing with my PCA10040 and I came across the problem. I thought that it was a softdevice problem, so I went to bootloader mode (by connecting with RESET button pressed). Now I have no possiblity to find my device. When I am trying to download a .hex file with softdevice, pop-up is opened with info that file is too big. Softdevice name: s132_nrf52_5.0.0_softdevice.hex

  • 0

    Could you be more precise about what you did before or at least some screenshots so we can see exactly what tool you use, how, which version of the tool and what the message exactly says?

  • 0

    Solved! Sometimes I have this problem and now I know that the solution is to flash softdevice by nRFGo app. Recently, when I posted this question, I didn't use a nRFGo app, and tried to download softdevice by bootloader mode (by connecting with RESET pressed and copy file to the bootloader dics). Opened pop-up was a typical Windows pop-up with info that there was to little place on disc to copy file. I solved this problem by flashing JLINK first and then softdevice.

Related
Terms of service