• State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 73 subscribers
  • Views 1203 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 125775
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with bootloader and softdevice nRF52832

aszka

Hi all,

I have been playing with my PCA10040 and I came across the problem. I thought that it was a softdevice problem, so I went to bootloader mode (by connecting with RESET button pressed). Now I have no possiblity to find my device. When I am trying to download a .hex file with softdevice, pop-up is opened with info that file is too big. Softdevice name: s132_nrf52_5.0.0_softdevice.hex

Parents
  • 0

    Solved! Sometimes I have this problem and now I know that the solution is to flash softdevice by nRFGo app. Recently, when I posted this question, I didn't use a nRFGo app, and tried to download softdevice by bootloader mode (by connecting with RESET pressed and copy file to the bootloader dics). Opened pop-up was a typical Windows pop-up with info that there was to little place on disc to copy file. I solved this problem by flashing JLINK first and then softdevice.

Reply
  • 0

    Solved! Sometimes I have this problem and now I know that the solution is to flash softdevice by nRFGo app. Recently, when I posted this question, I didn't use a nRFGo app, and tried to download softdevice by bootloader mode (by connecting with RESET pressed and copy file to the bootloader dics). Opened pop-up was a typical Windows pop-up with info that there was to little place on disc to copy file. I solved this problem by flashing JLINK first and then softdevice.

Children
No Data
Related
Terms of service