Change for Sample Applications from nRF52840 Rev A to Rev B

Are there any changes required to run the Sample Bluetooth Low Energy (BLE) applications from nRF5 SDK v14.2 when migrating from nRF52840 IC Rev A to Rev B? I have followed the changes specified in a previous Developer thread (https://devzone.nordicsemi.com/b/blog/posts/difference-between-nrf52840-engineering-a-and-b-re) but still, the radio isn't able to transmit. Can you advise of any further debug process?

Parents

0 Håkon Alseth over 7 years ago

Hi,

There should not be any other modifications than connecting DEC4 and DEC6.

Could you ensure that your clocks sources are soldered & running properly?

Here's an easy way to test both HFCLK and LFCLK, assuming they are both external (run at the top of main):

NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos;
NRF_CLOCK->TASKS_LFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0);

NRF_CLOCK->TASKS_HFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_HFCLKSTARTED == 0);

If your code hangs in one of the while-loops for a longer period, it points to an issue with soldering or external crystal.

If you have a custom design w/o external LFCLK, please make sure that your sdk_config.h file reflects this as the SoftDevice's LFCLK SRC, here with an example configuration:

// </h> 
//==========================================================

// <h> Clock - SoftDevice clock configuration

//==========================================================
// <o> NRF_SDH_CLOCK_LF_SRC  - SoftDevice clock source.
 
// <0=> NRF_CLOCK_LF_SRC_RC 
// <1=> NRF_CLOCK_LF_SRC_XTAL 
// <2=> NRF_CLOCK_LF_SRC_SYNTH 

#ifndef NRF_SDH_CLOCK_LF_SRC
#define NRF_SDH_CLOCK_LF_SRC 0
#endif

// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. 
#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
#define NRF_SDH_CLOCK_LF_RC_CTIV 16
#endif

// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. 
// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
// <i>  if the temperature has not changed.

#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 2
#endif

// <o> NRF_SDH_CLOCK_LF_XTAL_ACCURACY  - External crystal clock accuracy used in the LL to compute timing windows.
 
// <0=> NRF_CLOCK_LF_XTAL_ACCURACY_250_PPM 
// <1=> NRF_CLOCK_LF_XTAL_ACCURACY_500_PPM 
// <2=> NRF_CLOCK_LF_XTAL_ACCURACY_150_PPM 
// <3=> NRF_CLOCK_LF_XTAL_ACCURACY_100_PPM 
// <4=> NRF_CLOCK_LF_XTAL_ACCURACY_75_PPM 
// <5=> NRF_CLOCK_LF_XTAL_ACCURACY_50_PPM 
// <6=> NRF_CLOCK_LF_XTAL_ACCURACY_30_PPM 
// <7=> NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM 

#ifndef NRF_SDH_CLOCK_LF_XTAL_ACCURACY
#define NRF_SDH_CLOCK_LF_XTAL_ACCURACY 1
#endif

Cheers,

Håkon

Reply