error: 'NRF_DRV_TWI_INSTANCE_0' undeclared here

Question

I'm trying to enable TWI in the eddystone example based on this article but I get the following compilation error:

nrfx/legacy/nrf_drv_twi.h:120:37: error: 'NRF_DRV_TWI_INSTANCE_0' undeclared here (not in a function)

main.c
#include "nrf_drv_twi.h"

#define TWI_INSTANCE_ID 0
static const nrf_drv_twi_t m_twi = NRF_DRV_TWI_INSTANCE(TWI_INSTANCE_ID);

sdk_config.h

//==========================================================
#ifndef NRFX_TWI_ENABLED
#define NRFX_TWI_ENABLED 1
#endif
// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
 

#ifndef NRFX_TWI0_ENABLED
#define NRFX_TWI0_ENABLED 1
#endif


#ifndef TWI_ENABLED
#define TWI_ENABLED 1
#endif


// <e> TWI0_ENABLED - Enable TWI0 instance
//==========================================================
#ifndef TWI0_ENABLED
#define TWI0_ENABLED 1
#endif
// <q> TWI0_USE_EASY_DMA  - Use EasyDMA (if present)
 

#ifndef TWI0_USE_EASY_DMA
#define TWI0_USE_EASY_DMA 1
#endif

// </e>

//==========================================================
#ifndef NRFX_TWIM_ENABLED
#define NRFX_TWIM_ENABLED 1
#endif
// <q> NRFX_TWIM0_ENABLED  - Enable TWIM0 instance
 

#ifndef NRFX_TWIM0_ENABLED
#define NRFX_TWIM0_ENABLED 1
#endif

Added nrf_drv_twi.c to the project.

I can compile the twi_sensor project so the issue must be in the configs.
Should I add anything else into the sdk_config.h to make the TWI work?

rolandvagyok · Accepted Answer

Solved the issue, it was with my sdk_config.h

maiden · Answer

I had the exact same problem, The cause was that NRFX_TWI_ENABLED was set but not TWI_ENABLED. 
 See here:

Garth@ESS · Answer

I had this problem as well. 
 I solved it by modifying sdk_config.h as follows (find these lines and update the values): 
 
 #define NRFX_TWIM_ENABLED 1
#define NRFX_TWI_ENABLED 1
#define TWI_ENABLED 1
#define TWI0_ENABLED 1
#define TWI0_USE_EASY_DMA 1 
 If you look in SDK 15.2 ...\integration
rfx\legacy
rf_drv_twi.h, you will see the following around line 120. In order for NRF_DRV_TWI_INSTANCE_0 to be defined, one of the four #if statements must evaluate to true. In my case it should have been the first one, NRFX_TWIM0_ENABLED. 
 /**
 * @brief Macro for creating a TWI master driver instance.
 */
#define NRF_DRV_TWI_INSTANCE(id) NRF_DRV_TWI_INSTANCE_(id)
#define NRF_DRV_TWI_INSTANCE_(id) NRF_DRV_TWI_INSTANCE_ ## id
#if NRFX_CHECK(NRFX_TWIM0_ENABLED)
 #define NRF_DRV_TWI_INSTANCE_0 \
 { 0, { .twim = NRFX_TWIM_INSTANCE(0) }, true }
#elif NRFX_CHECK(NRFX_TWI0_ENABLED)
 #define NRF_DRV_TWI_INSTANCE_0 \
 { 0, { .twi = NRFX_TWI_INSTANCE(0) }, false }
#endif
#if NRFX_CHECK(NRFX_TWIM1_ENABLED)
 #define NRF_DRV_TWI_INSTANCE_1 \
 { 1, { .twim = NRFX_TWIM_INSTANCE(1) }, true }
#elif NRFX_CHECK(NRFX_TWI1_ENABLED)
 #define NRF_DRV_TWI_INSTANCE_1 \
 { 1, { .twi = NRFX_TWI_INSTANCE(1) }, false }
#endif 
 I found the #define NRFX_TWIM0_ENABLED in SDK 15.2 ...\integration
rfx\legacy\apply_old_config.h 
 #define NRFX_TWIM0_ENABLED (TWI0_ENABLED && TWI0_USE_EASY_DMA) 
 So, I went into my sdk_config.h and updated those #defines with non-zero values, and voila! Problem solved!

gos · Answer

Fantastic! Solved my problem as well. Thanks for sharing!

error: 'NRF_DRV_TWI_INSTANCE_0' undeclared here

Top Replies