This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Is there any help on implementing CCID interface (smart card) on nRF52840 USB interface

I'm wondering whether or not nRF52840 can be used for a USB smart card development.

"According to the spec of a USB CCID device (which could be found on www.usb.org), there are three main requirements (mentioned in below) which should be implemented on the chip to convert it to a USB CCID device:

1- USB CCID descriptors should be sent by chip to the host

2- CCID device specs (baud rate, clock frequency,…) should be sent to the host

3- 3 USB endpoints (1 Interrupt endpoint, 2 Bulk endpoints), which are used for sending CCID event notifications and CCID request/responses respectively, should be configured on the chip."

I believe there are some samples of new SDK around HID interface but unfortunately nothing on CCID interface. Is there any source to share with us on developing CCID interface?

Parents Reply Children
Related