Hi Support team,
In this application note, solder paste type 4 has 25 to 45 micron particle size range while IPC J-STD-005 as attached stated type 4 has 80% Minimum between 20-38 and type 3 between 25 - 45. Please clarify.
Regards
Salas
Hi Support team,
In this application note, solder paste type 4 has 25 to 45 micron particle size range while IPC J-STD-005 as attached stated type 4 has 80% Minimum between 20-38 and type 3 between 25 - 45. Please clarify.
Regards
Salas
Hi,
I consulted with our expert on the matter, there is indeed an incorrect type/size ratio in the document. It seems like the value was taken from an inconsistent datasheet. I will report it and have it fixed.
Still, but if keeping to the 20-38 microns type 4 it should be fine. Smaller is also fine, we commonly use type 5 in our lab due to requirements for other components.
Best regards,
Andreas
Hi Andreas,
Thank you. Look forward to seeing the update. Case closed.
Hi Andreas,
Thank you. Look forward to seeing the update. Case closed.