Hi, I just started working with NRF52-DK and SDK 15.0.
I tried to test the ble_peripheral examples and they work properly.
Then I tried to add the buttonless dfu inside the Blinky example and this works too.
Now I would need to add the DFU buttonless service within the Eddystone application. The Secure DFU Service appears among those available but when I try to load a new code (a .zip file with the secure bootloader) I get an error ("Fatal error"). I believe it is a conflict or something similar but I can not solve it.
Can someone help me?
I have attached the main file, the configuration file (sdk_config.h), log by smartphone and the log that shows the moment when the error occurs
Thank you
sdk_config.h
/**
* Copyright (c) 2016 - 2018, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/** @file
*
* @defgroup nrf5_sdk_for_eddystone main.c
* @{
* @ingroup nrf5_sdk_for_eddystone
* @brief Eddystone Beacon GATT Configuration Service + EID/eTLM sample application main file.
*
* This file contains the source code for an Eddystone
* Beacon GATT Configuration Service + EID/eTLM sample application.
*/
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "bsp.h"
#include "ble_conn_params.h"
#include "ble_advertising.h"
#include "nrf_sdh.h"
#include "nrf_sdh_ble.h"
#include "app_timer.h"
#include "es_app_config.h"
#include "app_scheduler.h"
#include "nrf_ble_es.h"
#include "nrf_ble_gatt.h"
#include "nrf_pwr_mgmt.h"
#include "es_adv.h"
#include "nordic_common.h"
#include "nrf.h"
#include "app_error.h"
#include "ble.h"
#include "ble_hci.h"
#include "ble_srv_common.h"
#include "ble_advdata.h"
#include "ble_advertising.h"
#include "ble_conn_params.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "app_timer.h"
#include "fds.h"
#include "peer_manager.h"
#include "ble_dfu.h"
#include "ble_conn_state.h"
#include "nrf_ble_qwr.h"
//#include "SEGGER_RTT.h"
#include "nrf_log.h" //aggiunto da Simone
#include "nrf_log_ctrl.h" //aggiunto da Simone
#include "nrf_log_default_backends.h" //aggiunto da Simone
#define DEAD_BEEF 0xDEADBEEF //!< Value used as error code on stack dump, can be used to identify stack location on stack unwind.
#define NON_CONNECTABLE_ADV_LED_PIN BSP_BOARD_LED_0 //!< Toggles when non-connectable advertisement is sent.
#define CONNECTED_LED_PIN BSP_BOARD_LED_1 //!< Is on when device has connected.
#define CONNECTABLE_ADV_LED_PIN BSP_BOARD_LED_2 //!< Is on when device is advertising connectable advertisements.
/**@brief Priority of the application BLE event handler.
* @note You shouldn't need to modify this value.
*/
#define APP_BLE_OBSERVER_PRIO 3
NRF_BLE_QWR_DEF(m_qwr);
NRF_BLE_GATT_DEF(m_gatt); //!< GATT module instance.
/**@brief Callback function for asserts in the SoftDevice.
*
* @details This function will be called in case of an assert in the SoftDevice.
*
* @warning This handler is an example only and does not fit a final product. You need to analyze
* how your product is supposed to react in case of Assert.
* @warning On assert from the SoftDevice, the system can only recover on reset.
*
* @param[in] line_num Line number of the failing ASSERT call.
* @param[in] file_name File name of the failing ASSERT call.
*/
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
app_error_handler(DEAD_BEEF, line_num, p_file_name);
}
/**@brief Function for handling BLE events.
*
* @param[in] p_ble_evt Bluetooth stack event.
* @param[in] p_context Unused.
*/
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
ret_code_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
// Pairing not supported
err_code = sd_ble_gap_sec_params_reply(p_ble_evt->evt.common_evt.conn_handle,
BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP,
NULL,
NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
// No system attributes have been stored.
err_code = sd_ble_gatts_sys_attr_set(p_ble_evt->evt.common_evt.conn_handle, NULL, 0, 0);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_CONNECTED:
bsp_board_led_on(CONNECTED_LED_PIN);
bsp_board_led_off(CONNECTABLE_ADV_LED_PIN);
break;
case BLE_GAP_EVT_DISCONNECTED:
// LED indication will be changed when advertising starts.
break;
case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
{
ble_gap_phys_t const phys =
{
.rx_phys = BLE_GAP_PHY_AUTO,
.tx_phys = BLE_GAP_PHY_AUTO,
};
err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
APP_ERROR_CHECK(err_code);
} break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for the GAP initialization.
*
* @details This function will set up all the necessary GAP (Generic Access Profile) parameters of
* the device. It also sets the permissions and appearance.
*/
static void gap_params_init(void)
{
ret_code_t err_code;
ble_gap_conn_params_t gap_conn_params;
ble_gap_conn_sec_mode_t sec_mode;
uint8_t device_name[] = APP_DEVICE_NAME;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
err_code = sd_ble_gap_device_name_set(&sec_mode,
device_name,
strlen((const char *)device_name));
APP_ERROR_CHECK(err_code);
memset(&gap_conn_params, 0, sizeof(gap_conn_params));
gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
gap_conn_params.slave_latency = SLAVE_LATENCY;
gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT;
err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the GATT module.
*/
static void gatt_init(void)
{
ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
ret_code_t err_code;
err_code = nrf_sdh_enable_request();
APP_ERROR_CHECK(err_code);
uint32_t ram_start = 0;
err_code = nrf_sdh_ble_app_ram_start_get(&ram_start);
APP_ERROR_CHECK(err_code);
// Overwrite some of the default configurations for the BLE stack.
ble_cfg_t ble_cfg;
// Configure the maximum number of connections.
memset(&ble_cfg, 0, sizeof(ble_cfg));
ble_cfg.gap_cfg.role_count_cfg.periph_role_count = 1;
#if !defined (S112)
ble_cfg.gap_cfg.role_count_cfg.central_role_count = 0;
ble_cfg.gap_cfg.role_count_cfg.central_sec_count = 0;
#endif // !defined (S112)
err_code = sd_ble_cfg_set(BLE_GAP_CFG_ROLE_COUNT, &ble_cfg, ram_start);
APP_ERROR_CHECK(err_code);
// Enable BLE stack.
err_code = nrf_sdh_ble_enable(&ram_start);
APP_ERROR_CHECK(err_code);
// Register a handler for BLE events.
NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}
/**@brief Function for initializing the Connection Parameters module.
*/
static void conn_params_init(void)
{
ret_code_t err_code;
ble_conn_params_init_t cp_init;
memset(&cp_init, 0, sizeof(cp_init));
cp_init.p_conn_params = NULL;
cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY;
cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT;
cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID;
cp_init.disconnect_on_fail = false;
err_code = ble_conn_params_init(&cp_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing power management.
*/
static void power_management_init(void)
{
ret_code_t err_code;
err_code = nrf_pwr_mgmt_init();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling the idle state (main loop).
*
* @details If there is no pending log operation, then sleep until next the next event occurs.
*/
static void idle_state_handle(void)
{
app_sched_execute();
nrf_pwr_mgmt_run();
}
/**@brief Function for handling Eddystone events.
*
* @param[in] evt Eddystone event to handle.
*/
static void on_es_evt(nrf_ble_es_evt_t evt)
{
switch (evt)
{
case NRF_BLE_ES_EVT_ADVERTISEMENT_SENT:
NRF_LOG_INFO("ADVERTISEMENT_SENT.");
bsp_board_led_invert(NON_CONNECTABLE_ADV_LED_PIN);
break;
case NRF_BLE_ES_EVT_CONNECTABLE_ADV_STARTED:
NRF_LOG_INFO("CONNECTABLE_ADV_STARTED.");
bsp_board_led_on(CONNECTABLE_ADV_LED_PIN);
break;
case NRF_BLE_ES_EVT_CONNECTABLE_ADV_STOPPED:
NRF_LOG_INFO("CONNECTABLE_ADV_STOPPED");
bsp_board_led_off(CONNECTABLE_ADV_LED_PIN);
break;
default:
break;
}
}
/**@brief Function for handling button events from app_button IRQ
*
* @param[in] pin_no Pin of the button for which an event has occured
* @param[in] button_action Press or Release
*/
static void button_evt_handler(uint8_t pin_no, uint8_t button_action)
{
if (button_action == APP_BUTTON_PUSH && pin_no == BUTTON_1)
{
nrf_ble_es_on_start_connectable_advertising();
}
}
/**
* @brief Function for initializing the registation button
*
* @retval Values returned by @ref app_button_init
* @retval Values returned by @ref app_button_enable
*/
static void button_init(void)
{
ret_code_t err_code;
const uint8_t buttons_cnt = 1;
static app_button_cfg_t buttons_cfgs =
{
.pin_no = BUTTON_REGISTRATION,
.active_state = APP_BUTTON_ACTIVE_LOW,
.pull_cfg = NRF_GPIO_PIN_PULLUP,
.button_handler = button_evt_handler
};
err_code = app_button_init(&buttons_cfgs, buttons_cnt, APP_TIMER_TICKS(100));
APP_ERROR_CHECK(err_code);
err_code = app_button_enable();
APP_ERROR_CHECK(err_code);
}
static void timers_init(void)
{
ret_code_t err_code = app_timer_init();
APP_ERROR_CHECK(err_code);
}
static void leds_init(void)
{
ret_code_t err_code = bsp_init(BSP_INIT_LEDS, NULL);
APP_ERROR_CHECK(err_code);
}
static void scheduler_init(void)
{
APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);
}
static void log_init(void)
{
ret_code_t err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
NRF_LOG_DEFAULT_BACKENDS_INIT();
}
/**@brief Function for handling Queued Write Module errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void nrf_qwr_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
// YOUR_JOB: Update this code if you want to do anything given a DFU event (optional).
/**@brief Function for handling dfu events from the Buttonless Secure DFU service
*
* @param[in] event Event from the Buttonless Secure DFU service.
*/
static void ble_dfu_evt_handler(ble_dfu_buttonless_evt_type_t event)
{
switch (event)
{
case BLE_DFU_EVT_BOOTLOADER_ENTER_PREPARE:
NRF_LOG_INFO("Device is preparing to enter bootloader mode.");
// YOUR_JOB: Disconnect all bonded devices that currently are connected.
// This is required to receive a service changed indication
// on bootup after a successful (or aborted) Device Firmware Update.
break;
case BLE_DFU_EVT_BOOTLOADER_ENTER:
// YOUR_JOB: Write app-specific unwritten data to FLASH, control finalization of this
// by delaying reset by reporting false in app_shutdown_handler
NRF_LOG_INFO("Device will enter bootloader mode.");
break;
case BLE_DFU_EVT_BOOTLOADER_ENTER_FAILED:
NRF_LOG_ERROR("Request to enter bootloader mode failed asynchroneously.");
// YOUR_JOB: Take corrective measures to resolve the issue
// like calling APP_ERROR_CHECK to reset the device.
break;
case BLE_DFU_EVT_RESPONSE_SEND_ERROR:
NRF_LOG_ERROR("Request to send a response to client failed.");
// YOUR_JOB: Take corrective measures to resolve the issue
// like calling APP_ERROR_CHECK to reset the device.
APP_ERROR_CHECK(false);
break;
default:
NRF_LOG_ERROR("Unknown event from ble_dfu_buttonless.");
break;
}
}
/**@brief Function for initializing services that will be used by the application.
*/
static void services_init(void)
{
ret_code_t err_code;
//ble_lbs_init_t init = {0};
nrf_ble_qwr_init_t qwr_init = {0};
ble_dfu_buttonless_init_t dfus_init = {0};
// Initialize Queued Write Module.
qwr_init.error_handler = nrf_qwr_error_handler;
err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init);
APP_ERROR_CHECK(err_code);
// Initialize LBS.
//init.led_write_handler = led_write_handler;
//err_code = ble_lbs_init(&m_lbs, &init);
//APP_ERROR_CHECK(err_code);
// Initialize the async SVCI interface to bootloader.
err_code = ble_dfu_buttonless_async_svci_init();
APP_ERROR_CHECK(err_code);
dfus_init.evt_handler = ble_dfu_evt_handler;
err_code = ble_dfu_buttonless_init(&dfus_init);
APP_ERROR_CHECK(err_code);
}
/**
* @brief Function for application main entry.
*/
int main(void)
{
// Initialize.
log_init();//aggiunto da Simone per log sulla Uart
timers_init();
leds_init();
button_init();
scheduler_init();
power_management_init();
ble_stack_init();
gap_params_init();
gatt_init();
services_init();//aggiunto da simone per buttonless dfu
conn_params_init();
nrf_ble_es_init(on_es_evt);
NRF_LOG_INFO("Eddystone Simone example started: %i",1);
//printf("ssss");
// Enter main loop.
for (;;)
{
idle_state_handle();
}
}
/**
* @}
*/
<info> app: Setting vector table to bootloader: 0x00078000 <info> app: Setting vector table to main app: 0x00026000 <info> app: Eddystone Simone example started: 1 <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: CONNECTABLE_ADV_STARTED. <info> app: BLE_GAP_EVT_CONNECTED <info> app: ADVERTISEMENT_SENT. <info> app: BLE_GATTS_EVT_WRITE <info> app: on_write <info> app: ADVERTISEMENT_SENT. <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT_SENT. <info> app: ADVERTISEMENT<info> app: BLE_GATTS_EVT_WRITE <info> app: on_write <info> app: Received indication state 1 <error> app: Fatal error <warning> app: System reset <info> app: Setting vector table to bootloader: 0x00078000 <info> app: Setting vector table to main app: 0x00026000 <info> app: Eddystone Simone example started: 1 <info> app: ADVERTISEMENT_SENT.
nRF Connect, 2018-06-28 nRF5x_Eddys (D1:29:6A:15:9B:CB) V 16:18:53.408 Connecting to D1:29:6A:15:9B:CB... D 16:18:53.408 gatt = device.connectGatt(autoConnect = false) D 16:18:54.374 [Callback] Connection state changed with status: 0 and new state: CONNECTED (2) I 16:18:54.374 Connected to D1:29:6A:15:9B:CB D 16:18:54.388 [Broadcast] Action received: android.bluetooth.device.action.ACL_CONNECTED V 16:18:54.390 Discovering services... D 16:18:54.390 gatt.discoverServices() D 16:18:57.416 [Callback] Services discovered with status: 0 I 16:18:57.416 Services discovered V 16:18:57.461 Generic Access (0x1800) - Device Name [R W] (0x2A00) - Appearance [R] (0x2A01) - Peripheral Preferred Connection Parameters [R] (0x2A04) - Central Address Resolution [R] (0x2AA6) Generic Attribute (0x1801) - Service Changed [I] (0x2A05) Client Characteristic Configuration (0x2902) Secure DFU Service (0xFE59) - Buttonless DFU [I W] (8ec90003-f315-4f60-9fb8-838830daea50) Client Characteristic Configuration (0x2902) Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295) - Capabilities [R] (a3c87501-8ed3-4bdf-8a39-a01bebede295) - Active Slot [R W] (a3c87502-8ed3-4bdf-8a39-a01bebede295) - Advertising Interval [R W] (a3c87503-8ed3-4bdf-8a39-a01bebede295) - Radio Tx Power [R W] (a3c87504-8ed3-4bdf-8a39-a01bebede295) - (Advanced) Advertised Tx Power [R W] (a3c87505-8ed3-4bdf-8a39-a01bebede295) - Lock State [R W] (a3c87506-8ed3-4bdf-8a39-a01bebede295) - Unlock [R W] (a3c87507-8ed3-4bdf-8a39-a01bebede295) - Public ECDH Key [R] (a3c87508-8ed3-4bdf-8a39-a01bebede295) - EID Identity Key [R] (a3c87509-8ed3-4bdf-8a39-a01bebede295) - ADV Slot Data [R W] (a3c8750a-8ed3-4bdf-8a39-a01bebede295) - (Advanced) Factory Reset [W] (a3c8750b-8ed3-4bdf-8a39-a01bebede295) - (Advanced) Remain Connectable [R W] (a3c8750c-8ed3-4bdf-8a39-a01bebede295) D 16:18:57.461 gatt.setCharacteristicNotification(00002a05-0000-1000-8000-00805f9b34fb, true) D 16:18:57.467 gatt.setCharacteristicNotification(8ec90003-f315-4f60-9fb8-838830daea50, true) V 16:19:01.022 Starting pairing... D 16:19:01.022 device.createBond() D 16:19:01.161 [Broadcast] Action received: android.bluetooth.device.action.BOND_STATE_CHANGED, bond state changed to: BOND_BONDING (11) D 16:19:01.277 [Broadcast] Action received: android.bluetooth.device.action.BOND_STATE_CHANGED, bond state changed to: BOND_NONE (10) I 16:19:01.277 Bonding failed D 16:19:01.367 [Callback] Connection state changed with status: 0 and new state: DISCONNECTED (0) I 16:19:01.367 Disconnected D 16:19:01.369 gatt.refresh() (hidden) D 16:19:01.625 [Broadcast] Action received: android.bluetooth.device.action.ACL_DISCONNECTED D 16:19:04.659 gatt.close() D 16:19:04.661 wait(200) V 16:19:04.870 Connecting to D1:29:6A:15:9B:CB... D 16:19:04.870 gatt = device.connectGatt(autoConnect = false) D 16:19:07.317 [Callback] Connection state changed with status: 0 and new state: CONNECTED (2) I 16:19:07.317 Connected to D1:29:6A:15:9B:CB D 16:19:07.346 [Broadcast] Action received: android.bluetooth.device.action.ACL_CONNECTED V 16:19:07.351 Discovering services... D 16:19:07.351 gatt.discoverServices() D 16:19:07.618 [Callback] Services discovered with status: 129 E 16:19:07.618 Error 129 (0x81): GATT INTERNAL ERROR D 16:19:07.619 [Callback] Connection state changed with status: 133 and new state: DISCONNECTED (0) E 16:19:07.619 Error 133 (0x85): GATT ERROR I 16:19:07.619 Disconnected D 16:19:07.726 [Broadcast] Action received: android.bluetooth.device.action.ACL_DISCONNECTED D 16:19:07.864 gatt.close() D 16:19:07.865 wait(200) V 16:19:08.066 Connecting to D1:29:6A:15:9B:CB... D 16:19:08.066 gatt = device.connectGatt(autoConnect = false) I 16:19:08.069 Disconnected D 16:19:08.537 [Callback] Connection state changed with status: 0 and new state: CONNECTED (2) I 16:19:08.537 Connected to D1:29:6A:15:9B:CB D 16:19:08.559 [Broadcast] Action received: android.bluetooth.device.action.ACL_CONNECTED V 16:19:08.560 Discovering services... D 16:19:08.560 gatt.discoverServices() D 16:19:11.618 [Callback] Services discovered with status: 0 I 16:19:11.618 Services discovered V 16:19:11.673 Generic Access (0x1800) - Device Name [R W] (0x2A00) - Appearance [R] (0x2A01) - Peripheral Preferred Connection Parameters [R] (0x2A04) - Central Address Resolution [R] (0x2AA6) Generic Attribute (0x1801) - Service Changed [I] (0x2A05) Client Characteristic Configuration (0x2902) Secure DFU Service (0xFE59) - Buttonless DFU [I W] (8ec90003-f315-4f60-9fb8-838830daea50) Client Characteristic Configuration (0x2902) Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295) - Capabilities [R] (a3c87501-8ed3-4bdf-8a39-a01bebede295) - Active Slot [R W] (a3c87502-8ed3-4bdf-8a39-a01bebede295) - Advertising Interval [R W] (a3c87503-8ed3-4bdf-8a39-a01bebede295) - Radio Tx Power [R W] (a3c87504-8ed3-4bdf-8a39-a01bebede295) - (Advanced) Advertised Tx Power [R W] (a3c87505-8ed3-4bdf-8a39-a01bebede295) - Lock State [R W] (a3c87506-8ed3-4bdf-8a39-a01bebede295) - Unlock [R W] (a3c87507-8ed3-4bdf-8a39-a01bebede295) - Public ECDH Key [R] (a3c87508-8ed3-4bdf-8a39-a01bebede295) - EID Identity Key [R] (a3c87509-8ed3-4bdf-8a39-a01bebede295) - ADV Slot Data [R W] (a3c8750a-8ed3-4bdf-8a39-a01bebede295) - (Advanced) Factory Reset [W] (a3c8750b-8ed3-4bdf-8a39-a01bebede295) - (Advanced) Remain Connectable [R W] (a3c8750c-8ed3-4bdf-8a39-a01bebede295) D 16:19:11.674 gatt.setCharacteristicNotification(00002a05-0000-1000-8000-00805f9b34fb, true) D 16:19:11.675 gatt.setCharacteristicNotification(8ec90003-f315-4f60-9fb8-838830daea50, true) A 16:19:23.292 Checking Lock state... V 16:19:23.292 Reading characteristic a3c87506-8ed3-4bdf-8a39-a01bebede295 D 16:19:23.292 gatt.readCharacteristic(a3c87506-8ed3-4bdf-8a39-a01bebede295) I 16:19:23.410 Read Response received from a3c87506-8ed3-4bdf-8a39-a01bebede295, value: (0x) 00 A 16:19:23.410 "Locked" received A 16:19:23.410 Service is locked. Unlocking... V 16:19:23.410 Reading characteristic a3c87507-8ed3-4bdf-8a39-a01bebede295 D 16:19:23.410 gatt.readCharacteristic(a3c87507-8ed3-4bdf-8a39-a01bebede295) I 16:19:23.590 Read Response received from a3c87507-8ed3-4bdf-8a39-a01bebede295, value: (0x) 0D-A1-F1-61-69-3F-76-DA-CA-AC-EB-0B-48-7D-83-9F A 16:19:23.590 "(0x) 0D-A1-F1-61-69-3F-76-DA-CA-AC-EB-0B-48-7D-83-9F" received V 16:19:23.590 Writing request to characteristic a3c87507-8ed3-4bdf-8a39-a01bebede295 D 16:19:23.590 gatt.writeCharacteristic(a3c87507-8ed3-4bdf-8a39-a01bebede295, value=0x543090622C08C11E86F0C59CD06A322D) I 16:19:23.770 Data written to a3c87507-8ed3-4bdf-8a39-a01bebede295, value: (0x) 54-30-90-62-2C-08-C1-1E-86-F0-C5-9C-D0-6A-32-2D A 16:19:23.770 "(0x) 54-30-90-62-2C-08-C1-1E-86-F0-C5-9C-D0-6A-32-2D" sent V 16:19:23.770 Reading characteristic a3c87506-8ed3-4bdf-8a39-a01bebede295 D 16:19:23.770 gatt.readCharacteristic(a3c87506-8ed3-4bdf-8a39-a01bebede295) A 16:19:23.950 Eddystone Configuration Service unlocked A 16:19:23.950 Reading active slot number... I 16:19:23.950 Read Response received from a3c87506-8ed3-4bdf-8a39-a01bebede295, value: (0x) 01 V 16:19:23.950 Reading characteristic a3c87502-8ed3-4bdf-8a39-a01bebede295 A 16:19:23.950 "Unlocked" received D 16:19:23.950 gatt.readCharacteristic(a3c87502-8ed3-4bdf-8a39-a01bebede295) I 16:19:24.220 Read Response received from a3c87502-8ed3-4bdf-8a39-a01bebede295, value: (0x) 00 A 16:19:24.220 "0" received A 16:19:24.220 Reading slot 0 advertising data... V 16:19:24.220 Reading characteristic a3c8750a-8ed3-4bdf-8a39-a01bebede295 D 16:19:24.220 gatt.readCharacteristic(a3c8750a-8ed3-4bdf-8a39-a01bebede295) W 16:19:24.400 Slot is not configured as EID I 16:19:24.400 Read Response received from a3c8750a-8ed3-4bdf-8a39-a01bebede295, value: (0x) 10-00-01-6E-6F-72-64-69-63-73-65-6D-69-00 A 16:19:24.400 "Frame type: URL <0x10> Tx power at 0m: 0 dBm URL: https://www.nordicsemi.com/" received V 16:19:27.155 Reading characteristic a3c8750c-8ed3-4bdf-8a39-a01bebede295 D 16:19:27.155 gatt.readCharacteristic(a3c8750c-8ed3-4bdf-8a39-a01bebede295) I 16:19:27.280 Read Response received from a3c8750c-8ed3-4bdf-8a39-a01bebede295, value: (0x) 01 A 16:19:27.280 "(0x) 01" received V 16:19:33.868 Writing request to characteristic a3c8750c-8ed3-4bdf-8a39-a01bebede295 D 16:19:33.869 gatt.writeCharacteristic(a3c8750c-8ed3-4bdf-8a39-a01bebede295, value=0x00) I 16:19:34.030 Data written to a3c8750c-8ed3-4bdf-8a39-a01bebede295, value: (0x) 00 A 16:19:34.030 "(0x) 00" sent V 16:19:35.643 Reading characteristic a3c8750c-8ed3-4bdf-8a39-a01bebede295 D 16:19:35.643 gatt.readCharacteristic(a3c8750c-8ed3-4bdf-8a39-a01bebede295) I 16:19:35.740 Read Response received from a3c8750c-8ed3-4bdf-8a39-a01bebede295, value: (0x) 01 A 16:19:35.740 "(0x) 01" received V 16:19:36.772 Reading characteristic a3c8750c-8ed3-4bdf-8a39-a01bebede295 D 16:19:36.772 gatt.readCharacteristic(a3c8750c-8ed3-4bdf-8a39-a01bebede295) I 16:19:36.910 Read Response received from a3c8750c-8ed3-4bdf-8a39-a01bebede295, value: (0x) 01 A 16:19:36.910 "(0x) 01" received V 16:19:42.784 Changing write type for a3c8750c-8ed3-4bdf-8a39-a01bebede295 to WRITE COMMAND D 16:19:42.784 characteristic.setWriteType(WRITE COMMAND) V 16:19:42.790 Writing command to characteristic a3c8750c-8ed3-4bdf-8a39-a01bebede295 D 16:19:42.790 gatt.writeCharacteristic(a3c8750c-8ed3-4bdf-8a39-a01bebede295, value=0x00) I 16:19:42.793 Data written to a3c8750c-8ed3-4bdf-8a39-a01bebede295, value: (0x) 00 A 16:19:42.793 "(0x) 00" sent V 16:19:47.818 Reading characteristic a3c8750c-8ed3-4bdf-8a39-a01bebede295 D 16:19:47.818 gatt.readCharacteristic(a3c8750c-8ed3-4bdf-8a39-a01bebede295) I 16:19:47.980 Read Response received from a3c8750c-8ed3-4bdf-8a39-a01bebede295, value: (0x) 01 A 16:19:47.980 "(0x) 01" received V 16:19:56.052 Writing command to characteristic a3c8750c-8ed3-4bdf-8a39-a01bebede295 D 16:19:56.052 gatt.writeCharacteristic(a3c8750c-8ed3-4bdf-8a39-a01bebede295, value=0x00) I 16:19:56.054 Data written to a3c8750c-8ed3-4bdf-8a39-a01bebede295, value: (0x) 00 A 16:19:56.054 "(0x) 00" sent V 16:21:01.268 [DFU] DFU service started V 16:21:01.268 [DFU] Opening file... I 16:21:02.144 [DFU] Firmware file opened successfully V 16:21:02.144 [DFU] Connecting to DFU target... D 16:21:02.144 [DFU] gatt = device.connectGatt(autoConnect = false) I 16:21:02.160 [DFU] Connected to D1:29:6A:15:9B:CB V 16:21:02.160 [DFU] Discovering services... D 16:21:02.160 [DFU] gatt.discoverServices() I 16:21:02.176 [DFU] Services discovered D 16:21:02.210 [DFU] wait(1000) W 16:21:03.208 [DFU] Application with buttonless update found V 16:21:03.209 [DFU] Jumping to the DFU Bootloader... V 16:21:03.209 [DFU] Enabling indications for 8ec90003-f315-4f60-9fb8-838830daea50 D 16:21:03.209 [DFU] gatt.setCharacteristicNotification(8ec90003-f315-4f60-9fb8-838830daea50, true) D 16:21:03.221 [DFU] gatt.writeDescriptor(00002902-0000-1000-8000-00805f9b34fb, value=0x02-00) I 16:21:03.321 [DFU] Data written to descr.8ec90003-f315-4f60-9fb8-838830daea50, value (0x): 02-00 V 16:21:03.321 [DFU] Notifications enabled for 8ec90003-f315-4f60-9fb8-838830daea50 A 16:21:03.321 [DFU] Indications enabled D 16:21:03.321 [DFU] wait(1000) V 16:21:04.381 [DFU] Writing to characteristic 8ec90003-f315-4f60-9fb8-838830daea50 D 16:21:04.381 [DFU] gatt.writeCharacteristic(8ec90003-f315-4f60-9fb8-838830daea50) D 16:21:08.403 [Callback] Connection state changed with status: 0 and new state: DISCONNECTED (0) I 16:21:08.403 Disconnected D 16:21:08.407 gatt.refresh() (hidden) A 16:21:08.420 [DFU] Enter bootloader sent (Op Code = 1) I 16:21:08.481 [DFU] Disconnected by the remote device D 16:21:08.481 [DFU] gatt.refresh() (hidden) D 16:21:08.481 [DFU] gatt.close() V 16:21:08.481 [DFU] Scanning for the DFU Bootloader... D 16:21:08.513 [Broadcast] Action received: android.bluetooth.device.action.ACL_DISCONNECTED D 16:21:08.516 [DFU] [Broadcast] Action received: android.bluetooth.device.action.ACL_DISCONNECTED I 16:21:08.800 [DFU] DFU Bootloader found with address D1:29:6A:15:9B:CB V 16:21:08.816 [DFU] DFU service started I 16:21:08.816 [DFU] Firmware file opened successfully D 16:21:08.816 [DFU] wait(1000) D 16:21:09.821 [DFU] wait(1000) V 16:21:10.867 [DFU] Connecting to DFU target... D 16:21:10.868 [DFU] gatt = device.connectGatt(autoConnect = false) E 16:21:15.912 [DFU] Connection failed (0x85): GATT ERROR W 16:21:15.912 [DFU] Retrying... V 16:21:15.912 [DFU] Disconnecting... D 16:21:15.994 [DFU] gatt.disconnect() I 16:21:15.994 [DFU] Disconnected D 16:21:15.994 [DFU] gatt.refresh() (hidden) D 16:21:15.994 [DFU] gatt.close() V 16:21:16.026 [DFU] DFU service started I 16:21:16.026 [DFU] Firmware file opened successfully D 16:21:16.026 [DFU] wait(1000) D 16:21:17.041 [DFU] wait(1000) V 16:21:18.028 [DFU] Connecting to DFU target... D 16:21:18.126 [DFU] gatt = device.connectGatt(autoConnect = false) E 16:21:23.135 [DFU] Connection failed (0x85): GATT ERROR V 16:21:23.135 [DFU] Disconnecting... D 16:21:23.202 [DFU] gatt.disconnect() I 16:21:23.203 [DFU] Disconnected D 16:21:23.204 [DFU] gatt.refresh() (hidden) D 16:21:23.206 [DFU] gatt.close() D 16:21:23.213 [DFU] wait(600) D 16:21:23.822 gatt.close() D 16:21:23.825 wait(200) V 16:21:24.027 Connecting to D1:29:6A:15:9B:CB... D 16:21:24.027 gatt = device.connectGatt(autoConnect = false) D 16:21:29.042 [Callback] Connection state changed with status: 133 and new state: CONNECTED (2) E 16:21:29.042 Error 133 (0x85): GATT ERROR V 16:21:58.413 Cancelling connection... D 16:21:58.413 gatt.disconnect() I 16:21:58.414 Disconnected D 16:21:58.414 gatt.close() D 16:21:58.416 wait(200)
