customize board with nRF52840 needed to communicate via PC bluetooth

[Zero.cool]

Hi All,

I am working on customized board using nRF52840 chip, I have a application which was developed using nRF development kit that communicates to my customize board.

But Right now I am not able to use the development kit and I have pc and my customized board.

So using PC's bluetooth is there any application there from nordic so that I can communicate to my board.

On board I have several peripheral I need to check.

so is it possible ?

[cbd]

I don't think that there is, you may be better off using a smartphone app.

[Zero.cool]

Thank you for replay.

Yes I have installed the app and I am able to connect to board.
But I have code to test on board using specific commands from PC.
actually,

on customize board to test leds, I have app from pc that talks via uard to dev. board. and dev. board was talking to customized board.

Now, dev. board is not there, And can you tell me How Do I test via mobile app.?

suppose, via dev. board I was sending a command (hex commands like 0x01 -> to turn led on).

from mobile app how do I do that?

can you have any idea?

on mobile I found one 'nrf uart 2.0' app, but I am not able to get how do i send commands?

Thanks,

[awneil]

You haven't set your Include Paths correctly.

[Zero.cool]

Hi,

I have set the include paths well also added to compiler list.
This errors comes when I select ARM compiler option in Keil.

Below are the errors occurs while selecting GCC ARM compiler.

Build target 'nrf52832_xxaa'
compiling system_nrf52.c...
*** Error: Failed to execute 'arm-none-eabi-gcc'
compiling main.c...
*** Error: Failed to execute 'arm-none-eabi-gcc'
assembling arm_startup_nrf52.s...
*** Error: Failed to execute 'arm-none-eabi-as'
compiling boards.c...
*** Error: Failed to execute 'arm-none-eabi-gcc'
linking...
--- Error: failed to execute 'arm-none-eabi-gcc'

At first , I have also thought of include path errors, Also included other includes,

But still error persists. I have brought up error because I wanted to know If I am missing

any steps while compiling so That I am facing errors.

Thanks

[Bjørn Kvaale]

I just use the default compiler in Keil under the Target tab:

Have you taken a look at this link? Which path have you unzipped your sdk 15 version to? Mine is quite close to the C drive:

C:\NordicSemi\SDKs\nRF5_SDK_15.0.0_a53641a

If you have a really long path to the sdk 15 folder, this could lead to compile issues like you have noticed.

[Zero.cool]

My path is :- C:\NRFDK\nRF5_SDK_15.0.0_a53641a

[Bjørn Kvaale]

That path should be fine. Are you also using the default compiler version 5 that I am using? Did you take a look at the link I sent you? 

[Zero.cool]

Hi Bjørn Kvaale,

I went through the link you have shared and worked fine. 
Apologise for delay in response.

Now I have custom board working with me.

What I am trying:- 

-connect the custom board with nrf52840 chip using nrf52 dongle on pc with python.

-Already set some commands on custom board so when my pc (via dongle) connects to custom board, I want to send some commands and accordingly receive the response.

For this I got my hands-on nrf dongle to give my laptop a BLE access.

And I am trying to access the board using dongle (using python script) and I am getting below error,

raise NordicSemiException('Failed to {}. Error code: {}'.format(wrapped.__name__, err_code))
pc_ble_driver_py.exceptions.NordicSemiException: Failed to open. Error code: 13.

Would you able to tell me how do i resolve this. 

I want to have python code that can connect and do some data transfer over BLE using Dongle connected to my pc and I have tried with hart_rate_monitor unsuccessfully. 

EDIT 1:- I am able to scan and connect my board using the nRF Connect windows app. Same I wanted to implement over python.

Thanks,

Hinesh