led softblink example with freertos rtc

[inghowe83]

Hi Nordic,

Hardware: custom nrf52840

sw: nRF5_SDK_15.2.0_9412b96

Target example code: blinky_rtc_freertos + led_softblink

Problem faced: I want to integrate this 2 code together and require rtc for freertos tickless idle feature but the softblink example have conflict app_timer_init() between app_timer.c and app_timer_freertos.c . I hope to get solutions on how to make the sofblink code working in rtc freertos environment.

[Susheel Nuguru]

Ideally, you need to delete app_timer.c file from your project.

You only should be using app_timer_freertos.c only. Both of them are API compatible, so you should not have problems removing app_timer.c from your project and soft_blink example will then use app_timer_freertos API correctly

[inghowe83]

Hi There,

I have attached my example, what I did is tried to use the softblink main.c directly on the Blink RTC FreeRTOS example, mind help me review is what I have broken? Thanks.

blinky_rtc_freertos.zip

[Susheel Nuguru]

inghowe83 said:

What are the main difference between non freertos vs freertos app timer?

 This is a good question.The app_timer_freertos and app_timer does not exactly behave similar.

The timers scheduling mechanism is completely different and the way they are queued and their linked list nature is completely different. But I am very surprised by the difference in behavior here. I did not expect them to show this big different. But there seems to be a huge difference. 

In FreeRTOS it is not possible to restart an already running timer (without stopping and restarting) but in app_timer we can do that easily. This difference could be explain a bit of this weird behavior.

[inghowe83]

Hi Susheel Nuguru

Thanks for your input. I still very new to softdevice and FreeRTOS, the pain part is our customer needs FreeRTOS while supporting softdevices api. Do nordic have any other solutions to make softblink workable under freertos rtc environment?

[Susheel Nuguru]

There is no problem using freeRTOS + softdevice. I think the problem for you is to use simulated PWM using app_timer. 

You need to use real PWM instead of a simulated one to solve . I have edited your example to use PWM instead of app_timer and i can see the softblink now. If you want to understand how PWM works, I would recommend you to read its spec from the product specification.

blinky_PWM_freertos.rar

[inghowe83]

Thank you Susheel Nuguru

May I know which is the parameters to affect the blink interval and pwm freq in this sample code?

Thanks

[Susheel Nuguru]

you need to understand in detail about what each member in the below config means

    nrf_drv_pwm_config_t const config0 =

The below four will decide the tone of your softblink

        .count_mode   = NRF_PWM_MODE_UP,
        .top_value    = m_demo1_top,
        .load_mode    = NRF_PWM_LOAD_INDIVIDUAL,
        .step_mode    = NRF_PWM_STEP_AUTO

[inghowe83]

thank you Susheel Nuguru