This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

nrf52832, sd card and accelerometer.

Hello!

I have both SD Card and accelerometer in same SPI bus. Both of them working like charm if another is not present. I'am using app_sdcard from 52 sdk.

Can i use spi manager for my accelerometer or does that effect to sd card drivers?

I have found that SD Card drivers are using gpio to enable and disable CS but problem is that its uses handler. When i try to use same SPI master the sd card:s handler doesn't like data from accelerometer.

I have tried to add NRFX_SPIM_FLAG_NO_XFER_EVT_HANDLER to modified nrf_drv_spi_transfer, but then i don't get any data out and it still gives me

<error> app: ERROR 3 [NRF_ERROR_INTERNAL] at C:\nrf\components\libraries\sdcard\app_sdcard.c:987
PC at: 0x0002D26B

And error is from app_sdcard spi_handler.

As i did have few pins to spare. I seperated SD Card and accelerometer to own busses and it still does not work.

SD Card setup:

CS: pin 11

SCK: 16

MOSI: 17

MISO: 18

Using SPI 2 instance

Accelerometer:

CS: 12

SCK: 5

MOSI: 4

MISO: 3

Using SPI 1 instance

The one which initializes first works and other is not doing anything.

I have another sensor which uses i2c and it uses TWI instance 0

Parents Reply Children
No Data
Related